667 research outputs found
Feasibility of Imaging-Based 3-Dimensional Models to Design Patient-Specific Osteosynthesis Plates and Drilling Guides
Importance: In acetabular fracture surgery, achieving an optimal reconstruction of the articular surface decreases the risk of osteoarthritis and the subsequent need for total hip arthroplasty. However, no one-size-fits-all osteosynthesis plate is available owing to differences in fracture patterns and variations in pelvic anatomy. Currently, osteosynthesis plates need to be manually contoured intraoperatively, often resulting in inadequate reduction and fixation of the fractured segments. Objective: To determine the feasibility and accuracy of a novel concept of fast-track 3-dimensional (3-D) virtual surgical planning and patient-specific osteosynthesis for complex acetabular fracture surgery. Design, Setting, and Participants: This case series study examines the use of patient-specific osteosynthesis plates for patients needing operative treatment for displaced associated-type acetabular fractures at a tertiary university-affiliated referral center and level 1 trauma center between January 1, 2017, and December 31, 2018. Models were created in 3-D based on computed tomography (CT) data, fractures were virtually reduced, and implant positions were discussed in a multidisciplinary team of clinicians and engineers. Patient-specific osteosynthesis plates with drilling guides were designed, produced, sterilized and clinically applied within 4 days. Data were analyzed at the 1-year follow-up. Exposures: Development and clinical implementation of personalized fracture surgery. Main Outcomes and Measures: The primary outcome was the quality of the reduction as determined by the postoperative CT scan. The secondary outcomes were accuracy of the screw placement and clinical outcome using patient-reported outcome measures. Results: Ten patients with a median (range) age of 63 (46-79) years with an acetabular fracture were included. The median (interquartile range [IQR]) preoperative gap was 20 (15-22) mm, and the median (IQR) step-off was 5 (3-11) mm. Postoperatively, the median (IQR) gap was reduced to 3 (2-5) mm (P = .005), and the median (IQR) step-off was reduced to 0 (0-2) mm (P = .01), indicating good fracture reduction, indicating good fracture reduction. The mean difference between the preoperative and postoperative gap was 14.6 (95% CI, 10-19) mm, and the mean difference in step-off was 5.7 (95% CI, 2-9) mm. The median (IQR) difference in screw direction between the planning and actual surgery was only 7.1° (7°-8°). All patients retained their native hip and reported good physical functioning at follow-up. Conclusions and Relevance: These findings suggest that 3-D virtual surgical planning, manufacturing, and clinical application of patient-specific osteosynthesis plates and drilling guides was feasible and yielded good clinical outcomes. Fast-track personalized surgical treatment could open a new era for the treatment of complex injuries
Search for Relativistic Magnetic Monopoles with IceCube
We present the first results in the search for relativistic magnetic
monopoles with the IceCube detector, a subsurface neutrino telescope located in
the South Polar ice cap containing a volume of 1 km. This analysis
searches data taken on the partially completed detector during 2007 when
roughly 0.2 km of ice was instrumented. The lack of candidate events
leads to an upper limit on the flux of relativistic magnetic monopoles of
\Phi_{\mathrm{90%C.L.}}\sim 3\e{-18}\fluxunits for . This is a
factor of 4 improvement over the previous best experimental flux limits up to a
Lorentz boost below . This result is then interpreted for a
wide range of mass and kinetic energy values.Comment: 11 pages, 11 figures. v2 is minor text edits, no changes to resul
An improved method for measuring muon energy using the truncated mean of dE/dx
The measurement of muon energy is critical for many analyses in large
Cherenkov detectors, particularly those that involve separating
extraterrestrial neutrinos from the atmospheric neutrino background. Muon
energy has traditionally been determined by measuring the specific energy loss
(dE/dx) along the muon's path and relating the dE/dx to the muon energy.
Because high-energy muons (E_mu > 1 TeV) lose energy randomly, the spread in
dE/dx values is quite large, leading to a typical energy resolution of 0.29 in
log10(E_mu) for a muon observed over a 1 km path length in the IceCube
detector. In this paper, we present an improved method that uses a truncated
mean and other techniques to determine the muon energy. The muon track is
divided into separate segments with individual dE/dx values. The elimination of
segments with the highest dE/dx results in an overall dE/dx that is more
closely correlated to the muon energy. This method results in an energy
resolution of 0.22 in log10(E_mu), which gives a 26% improvement. This
technique is applicable to any large water or ice detector and potentially to
large scintillator or liquid argon detectors.Comment: 12 pages, 16 figure
Lateral Distribution of Muons in IceCube Cosmic Ray Events
In cosmic ray air showers, the muon lateral separation from the center of the
shower is a measure of the transverse momentum that the muon parent acquired in
the cosmic ray interaction. IceCube has observed cosmic ray interactions that
produce muons laterally separated by up to 400 m from the shower core, a factor
of 6 larger distance than previous measurements. These muons originate in high
pT (> 2 GeV/c) interactions from the incident cosmic ray, or high-energy
secondary interactions. The separation distribution shows a transition to a
power law at large values, indicating the presence of a hard pT component that
can be described by perturbative quantum chromodynamics. However, the rates and
the zenith angle distributions of these events are not well reproduced with the
cosmic ray models tested here, even those that include charm interactions. This
discrepancy may be explained by a larger fraction of kaons and charmed
particles than is currently incorporated in the simulations
Search for non-relativistic Magnetic Monopoles with IceCube
The IceCube Neutrino Observatory is a large Cherenkov detector instrumenting
of Antarctic ice. The detector can be used to search for
signatures of particle physics beyond the Standard Model. Here, we describe the
search for non-relativistic, magnetic monopoles as remnants of the GUT (Grand
Unified Theory) era shortly after the Big Bang. These monopoles may catalyze
the decay of nucleons via the Rubakov-Callan effect with a cross section
suggested to be in the range of to
. In IceCube, the Cherenkov light from nucleon decays
along the monopole trajectory would produce a characteristic hit pattern. This
paper presents the results of an analysis of first data taken from May 2011
until May 2012 with a dedicated slow-particle trigger for DeepCore, a
subdetector of IceCube. A second analysis provides better sensitivity for the
brightest non-relativistic monopoles using data taken from May 2009 until May
2010. In both analyses no monopole signal was observed. For catalysis cross
sections of the flux of non-relativistic
GUT monopoles is constrained up to a level of at a 90% confidence level,
which is three orders of magnitude below the Parker bound. The limits assume a
dominant decay of the proton into a positron and a neutral pion. These results
improve the current best experimental limits by one to two orders of magnitude,
for a wide range of assumed speeds and catalysis cross sections.Comment: 20 pages, 20 figure
Determining neutrino oscillation parameters from atmospheric muon neutrino disappearance with three years of IceCube DeepCore data
We present a measurement of neutrino oscillations via atmospheric muon
neutrino disappearance with three years of data of the completed IceCube
neutrino detector. DeepCore, a region of denser instrumentation, enables the
detection and reconstruction of atmospheric muon neutrinos between 10 GeV and
100 GeV, where a strong disappearance signal is expected. The detector volume
surrounding DeepCore is used as a veto region to suppress the atmospheric muon
background. Neutrino events are selected where the detected Cherenkov photons
of the secondary particles minimally scatter, and the neutrino energy and
arrival direction are reconstructed. Both variables are used to obtain the
neutrino oscillation parameters from the data, with the best fit given by
and
(normal mass hierarchy assumed). The
results are compatible and comparable in precision to those of dedicated
oscillation experiments.Comment: 10 pages, 7 figure
Flavor Ratio of Astrophysical Neutrinos above 35 TeV in IceCube
A diffuse flux of astrophysical neutrinos above has been
observed at the IceCube Neutrino Observatory. Here we extend this analysis to
probe the astrophysical flux down to and analyze its flavor
composition by classifying events as showers or tracks. Taking advantage of
lower atmospheric backgrounds for shower-like events, we obtain a shower-biased
sample containing 129 showers and 8 tracks collected in three years from 2010
to 2013. We demonstrate consistency with the
flavor ratio at Earth
commonly expected from the averaged oscillations of neutrinos produced by pion
decay in distant astrophysical sources. Limits are placed on non-standard
flavor compositions that cannot be produced by averaged neutrino oscillations
but could arise in exotic physics scenarios. A maximally track-like composition
of is excluded at , and a purely shower-like
composition of is excluded at .Comment: 8 pages, 3 figures. Submitted to PR
Search for Dark Matter Annihilation in the Galactic Center with IceCube-79
The Milky Way is expected to be embedded in a halo of dark matter particles,
with the highest density in the central region, and decreasing density with the
halo-centric radius. Dark matter might be indirectly detectable at Earth
through a flux of stable particles generated in dark matter annihilations and
peaked in the direction of the Galactic Center. We present a search for an
excess flux of muon (anti-) neutrinos from dark matter annihilation in the
Galactic Center using the cubic-kilometer-sized IceCube neutrino detector at
the South Pole. There, the Galactic Center is always seen above the horizon.
Thus, new and dedicated veto techniques against atmospheric muons are required
to make the southern hemisphere accessible for IceCube. We used 319.7 live-days
of data from IceCube operating in its 79-string configuration during 2010 and
2011. No neutrino excess was found and the final result is compatible with the
background. We present upper limits on the self-annihilation cross-section,
\left, for WIMP masses ranging from 30 GeV up to
10 TeV, assuming cuspy (NFW) and flat-cored (Burkert) dark matter halo
profiles, reaching down to cm s, and
cm s for the
channel, respectively.Comment: 14 pages, 9 figures, Submitted to EPJ-C, added references, extended
limit overvie
Calibration and Characterization of the IceCube Photomultiplier Tube
Over 5,000 PMTs are being deployed at the South Pole to compose the IceCube
neutrino observatory. Many are placed deep in the ice to detect Cherenkov light
emitted by the products of high-energy neutrino interactions, and others are
frozen into tanks on the surface to detect particles from atmospheric cosmic
ray showers. IceCube is using the 10-inch diameter R7081-02 made by Hamamatsu
Photonics. This paper describes the laboratory characterization and calibration
of these PMTs before deployment. PMTs were illuminated with pulses ranging from
single photons to saturation level. Parameterizations are given for the single
photoelectron charge spectrum and the saturation behavior. Time resolution,
late pulses and afterpulses are characterized. Because the PMTs are relatively
large, the cathode sensitivity uniformity was measured. The absolute photon
detection efficiency was calibrated using Rayleigh-scattered photons from a
nitrogen laser. Measured characteristics are discussed in the context of their
relevance to IceCube event reconstruction and simulation efforts.Comment: 40 pages, 12 figure
- …