403 research outputs found
Accuracy and Limitations of Fitting and Stereoscopic Methods to Determine the Direction of Coronal Mass Ejections from Heliospheric Imagers Observations
Using data from the Heliospheric Imagers (HIs) onboard STEREO, it is possible
to derive the direction of propagation of coronal mass ejections (CMEs) in
addition to their speed with a variety of methods. For CMEs observed by both
STEREO spacecraft, it is possible to derive their direction using simultaneous
observations from the twin spacecraft and also, using observations from only
one spacecraft with fitting methods. This makes it possible to test and compare
different analyses techniques. In this article, we propose a new fitting method
based on observations from one spacecraft, which we compare to the commonly
used fitting method of Sheeley et al. (1999). We also compare the results from
these two fitting methods with those from two stereoscopic methods, focusing on
12 CMEs observed simultaneously by the two STEREO spacecraft in 2008 and 2009.
We find evidence that the fitting method of Sheeley et al. (1999) can result in
significant errors in the determination of the CME direction when the CME
propagates outside of 60deg \pm 20 deg from the Sun-spacecraft line. We expect
our new fitting method to be better adapted to the analysis of halo or limb
CMEs with respect to the observing spacecraft. We also find some evidence that
direct triangulation in the HI fields-of-view should only be applied to CMEs
propagating approximatively towards Earth (\pm 20deg from the Sun-Earth line).
Last, we address one of the possible sources of errors of fitting methods: the
assumption of radial propagation. Using stereoscopic methods, we find that at
least seven of the 12 studied CMEs had an heliospheric deflection of less than
20deg as they propagated in the HI fields-of-view, which, we believe, validates
this approximation.Comment: 17 pages, 6 figures, 2 tables, accepted to Solar Physic
An Asymmetric Cone Model for Halo Coronal Mass Ejections
Due to projection effects, coronagraphic observations cannot uniquely
determine parameters relevant to the geoeffectiveness of CMEs, such as the true
propagation speed, width, or source location. The Cone Model for Coronal Mass
Ejections (CMEs) has been studied in this respect and it could be used to
obtain these parameters. There are evidences that some CMEs initiate from a
flux-rope topology. It seems that these CMEs should be elongated along the
flux-rope axis and the cross section of the cone base should be rather
elliptical than circular. In the present paper we applied an asymmetric cone
model to get the real space parameters of frontsided halo CMEs (HCMEs) recorded
by SOHO/LASCO coronagraphs in 2002. The cone model parameters are generated
through a fitting procedure to the projected speeds measured at different
position angles on the plane of the sky. We consider models with the apex of
the cone located at the center and surface of the Sun. The results are compared
to the standard symmetric cone model
A Statistical Study on the Morphology of Rays and Dynamics of Blobs in the Wake of Coronal Mass Ejections
In this paper, with a survey through the Large Angle and Spectrometric
Coronagraph (LASCO) data from 1996 to 2009, we present 11 events with plasma
blobs flowing outwards sequentially along a bright coronal ray in the wake of a
coronal mass ejection. The ray is believed to be associated with the current
sheet structure that formed as a result of solar eruption, and the blobs are
products of magnetic reconnection occurring along the current sheet. The ray
morphology and blob dynamics are investigated statistically. It is found that
the apparent angular widths of the rays at a fixed time vary in a range of
2.1-6.6 (2.0-4.4) degrees with an average of 3.5 (2.9) degrees at 3 (4) Rs,
respectively, and the observed durations of the events vary from 12 h to a few
days with an average of 27 h. It is also found, based on the analysis of blob
motions, that 58% (26) of the blobs were accelerated, 20% (9) were decelerated,
and 22% (10) moved with a nearly-constant speed. Comparing the dynamics of our
blobs and those that are observed above the tip of a helmet streamer, we find
that the speeds and accelerations of the blobs in these two cases differ
significantly. It is suggested that these differences of the blob dynamics stem
from the associated magnetic reconnection involving different magnetic field
configurations and triggering processes.Comment: 12 pages, 6 figures, accepted by Solar Physic
Effect of Solar Wind Drag on the Determination of the Properties of Coronal Mass Ejections from Heliospheric Images
The Fixed-\Phi (F\Phi) and Harmonic Mean (HM) fitting methods are two methods
to determine the average direction and velocity of coronal mass ejections
(CMEs) from time-elongation tracks produced by Heliospheric Imagers (HIs), such
as the HIs onboard the STEREO spacecraft. Both methods assume a constant
velocity in their descriptions of the time-elongation profiles of CMEs, which
are used to fit the observed time-elongation data. Here, we analyze the effect
of aerodynamic drag on CMEs propagating through interplanetary space, and how
this drag affects the result of the F\Phi and HM fitting methods. A simple drag
model is used to analytically construct time-elongation profiles which are then
fitted with the two methods. It is found that higher angles and velocities give
rise to greater error in both methods, reaching errors in the direction of
propagation of up to 15 deg and 30 deg for the F\Phi and HM fitting methods,
respectively. This is due to the physical accelerations of the CMEs being
interpreted as geometrical accelerations by the fitting methods. Because of the
geometrical definition of the HM fitting method, it is affected by the
acceleration more greatly than the F\Phi fitting method. Overall, we find that
both techniques overestimate the initial (and final) velocity and direction for
fast CMEs propagating beyond 90 deg from the Sun-spacecraft line, meaning that
arrival times at 1 AU would be predicted early (by up to 12 hours). We also
find that the direction and arrival time of a wide and decelerating CME can be
better reproduced by the F\Phi due to the cancellation of two errors:
neglecting the CME width and neglecting the CME deceleration. Overall, the
inaccuracies of the two fitting methods are expected to play an important role
in the prediction of CME hit and arrival times as we head towards solar maximum
and the STEREO spacecraft further move behind the Sun.Comment: Solar Physics, Online First, 17 page
Star Models with Dark Energy
We have constructed star models consisting of four parts: (i) a homogeneous
inner core with anisotropic pressure (ii) an infinitesimal thin shell
separating the core and the envelope; (iii) an envelope of inhomogeneous
density and isotropic pressure; (iv) an infinitesimal thin shell matching the
envelope boundary and the exterior Schwarzschild spacetime. We have analyzed
all the energy conditions for the core, envelope and the two thin shells. We
have found that, in order to have static solutions, at least one of the regions
must be constituted by dark energy. The results show that there is no physical
reason to have a superior limit for the mass of these objects but for the ratio
of mass and radius.Comment: 20 pages, 1 figure, references and some comments added, typos
corrected, in press GR
Dynamics of tree diversity in undisturbed and logged subtropical rainforest in Australia
In subtropical rainforest in eastern Australia, changes in the diversity of trees were compared under natural conditions and eight silvicultural regimes over 35 years. In the treated plots basal area remaining after logging ranged from 12 to 58 m2 per ha. In three control plots richness differed little over this period. In the eight treated plots richness per plot generally declined after intervention and then gradually increased to greater than original diversity. After logging there was a reduction in richness per plot and an increase in species richness per stem in all but the lightest selective treatments. The change in species diversity was related to the intensity of the logging, however the time taken for species richness to return to pre-logging levels was similar in all silvicultural treatments and was not effected by the intensity of treatment. These results suggest that light selective logging in these forests mainly affects dominant species. The return to high diversity after only a short time under all silvicultural regimes suggests that sustainability and the manipulation of species composition for desired management outcomes is possible
Svestka's Research: Then and Now
Zdenek Svestka's research work influenced many fields of solar physics,
especially in the area of flare research. In this article I take five of the
areas that particularly interested him and assess them in a "then and now"
style. His insights in each case were quite sound, although of course in the
modern era we have learned things that he could not readily have envisioned.
His own views about his research life have been published recently in this
journal, to which he contributed so much, and his memoir contains much
additional scientific and personal information (Svestka, 2010).Comment: Invited review for "Solar and Stellar Flares," a conference in honour
of Prof. Zden\v{e}k \v{S}vestka, Prague, June 23-27, 2014. This is a
contribution to a Topical Issue in Solar Physics, based on the presentations
at this meeting (Editors Lyndsay Fletcher and Petr Heinzel
Machine learning-based investigation of the association between CMEs and filaments
YesIn this work we study the association between eruptive filaments/prominences and coronal mass ejections (CMEs) using machine learning-based algorithms that analyse the solar data available between January 1996 and December 2001. The Support Vector Machine (SVM) learning algorithm is used for the purpose of knowledge extraction from the association results. The aim is to identify patterns of associations that can be represented using SVM learning rules for the subsequent use in near real-time and reliable CME prediction systems. Timing and location data in the NGDC filament catalogue and the SOHO/LASCO CME catalogue are processed to associate filaments with CMEs. In the previous studies which classified CMEs into gradual and impulsive CMEs, the associations were refined based on CME speed and acceleration. Then the associated pairs were refined manually to increase the accuracy of the training dataset. In the current study, a data- mining system has been created to process and associate filament and CME data, which are arranged in numerical training vectors. Then the data are fed to SVMs to extract the embedded knowledge and provide the learning rules that could have the potential, in the future, to provide automated predictions of CMEs. The features representing the event time (average of the start and end times), duration, type and extent of the filaments are extracted from all the associated and not-associated filaments and converted to a numerical format that is suitable for SVM use. Several validation and verification methods are used on the extracted dataset to determine if CMEs can be predicted solely and efficiently based on the associated filaments. More than 14000 experiments are carried out to optimise the SVM and determine the input features that provide the best performance
Single Spin Asymmetry in Polarized Proton-Proton Elastic Scattering at GeV
We report a high precision measurement of the transverse single spin
asymmetry at the center of mass energy GeV in elastic
proton-proton scattering by the STAR experiment at RHIC. The was measured
in the four-momentum transfer squared range \GeVcSq, the region of a significant interference between the
electromagnetic and hadronic scattering amplitudes. The measured values of
and its -dependence are consistent with a vanishing hadronic spin-flip
amplitude, thus providing strong constraints on the ratio of the single
spin-flip to the non-flip amplitudes. Since the hadronic amplitude is dominated
by the Pomeron amplitude at this , we conclude that this measurement
addresses the question about the presence of a hadronic spin flip due to the
Pomeron exchange in polarized proton-proton elastic scattering.Comment: 12 pages, 6 figure
High non-photonic electron production in + collisions at = 200 GeV
We present the measurement of non-photonic electron production at high
transverse momentum ( 2.5 GeV/) in + collisions at
= 200 GeV using data recorded during 2005 and 2008 by the STAR
experiment at the Relativistic Heavy Ion Collider (RHIC). The measured
cross-sections from the two runs are consistent with each other despite a large
difference in photonic background levels due to different detector
configurations. We compare the measured non-photonic electron cross-sections
with previously published RHIC data and pQCD calculations. Using the relative
contributions of B and D mesons to non-photonic electrons, we determine the
integrated cross sections of electrons () at 3 GeV/10 GeV/ from bottom and charm meson decays to be = 4.0({\rm
stat.})({\rm syst.}) nb and =
6.2({\rm stat.})({\rm syst.}) nb, respectively.Comment: 17 pages, 17 figure
- …