Systemic Trans- and Postoperative Evaluations of Patients Undergoing Dental Implant Surgery

OBJECTIVE: The aims of this study were to examine the trans- and postoperative systemic characteristics of patients undergoing dental implant surgery and to investigate the relationship between pre- and post- surgery anxiety levels. MATERIAL AND METHODS: Thirty-nine patients were analyzed in 3 call centers to determine anxiety levels, pain levels, and preoperative and postoperative histories using the State-Trait (STAI) questionnaire. RESULTS: A total of 93 dental implants were installed, with a success rate of 100%. The most frequently reported systemic disease was hypertension. There was a significantly higher rate of effective clamping (torque) to the mandibular bone than to the maxillary bone. The association between postoperative surgical complications and longer operative time was not significant, but there was a significant correlation between the alteration of mouth opening and daily routine activities and a significant decrease in anxiety levels between the day of surgery and the postoperative time point (p =0.006). CONCLUSION: A longer surgical time was associated with surgery-related complications and with a higher anxiety index on the preoperative evaluation

A database of freshwater fish species of the Amazon Basin

The Amazon Basin is an unquestionable biodiversity hotspot, containing the highest freshwater biodiversity on earth and facing off a recent increase in anthropogenic threats. The current knowledge on the spatial distribution of the freshwater fish species is greatly deficient in this basin, preventing a comprehensive understanding of this hyper-diverse ecosystem as a whole. Filling this gap was the priority of a transnational collaborative project, i.e. the AmazonFish project - https://www.amazon-fish.com/. Relying on the outputs of this project, we provide the most complete fish species distribution records covering the whole Amazon drainage. The database, including 2,406 validated freshwater native fish species, 232,936 georeferenced records, results from an extensive survey of species distribution including 590 different sources (e.g. published articles, grey literature, online biodiversity databases and scientific collections from museums and universities worldwide) and field expeditions conducted during the project. This database, delivered at both georeferenced localities (21,500 localities) and sub-drainages grains (144 units), represents a highly valuable source of information for further studies on freshwater fish biodiversity, biogeography and conservation

Pervasive gaps in Amazonian ecological research

Biodiversity loss is one of the main challenges of our time,1,2 and attempts to address it require a clear un derstanding of how ecological communities respond to environmental change across time and space.3,4 While the increasing availability of global databases on ecological communities has advanced our knowledge of biodiversity sensitivity to environmental changes,5–7 vast areas of the tropics remain understudied.8–11 In the American tropics, Amazonia stands out as the world’s most diverse rainforest and the primary source of Neotropical biodiversity,12 but it remains among the least known forests in America and is often underrepre sented in biodiversity databases.13–15 To worsen this situation, human-induced modifications16,17 may elim inate pieces of the Amazon’s biodiversity puzzle before we can use them to understand how ecological com munities are responding. To increase generalization and applicability of biodiversity knowledge,18,19 it is thus crucial to reduce biases in ecological research, particularly in regions projected to face the most pronounced environmental changes. We integrate ecological community metadata of 7,694 sampling sites for multiple or ganism groups in a machine learning model framework to map the research probability across the Brazilian Amazonia, while identifying the region’s vulnerability to environmental change. 15%–18% of the most ne glected areas in ecological research are expected to experience severe climate or land use changes by 2050. This means that unless we take immediate action, we will not be able to establish their current status, much less monitor how it is changing and what is being lostinfo:eu-repo/semantics/publishedVersio

Pervasive gaps in Amazonian ecological research

Biodiversity loss is one of the main challenges of our time,1,2 and attempts to address it require a clear understanding of how ecological communities respond to environmental change across time and space.3,4 While the increasing availability of global databases on ecological communities has advanced our knowledge of biodiversity sensitivity to environmental changes,5,6,7 vast areas of the tropics remain understudied.8,9,10,11 In the American tropics, Amazonia stands out as the world's most diverse rainforest and the primary source of Neotropical biodiversity,12 but it remains among the least known forests in America and is often underrepresented in biodiversity databases.13,14,15 To worsen this situation, human-induced modifications16,17 may eliminate pieces of the Amazon's biodiversity puzzle before we can use them to understand how ecological communities are responding. To increase generalization and applicability of biodiversity knowledge,18,19 it is thus crucial to reduce biases in ecological research, particularly in regions projected to face the most pronounced environmental changes. We integrate ecological community metadata of 7,694 sampling sites for multiple organism groups in a machine learning model framework to map the research probability across the Brazilian Amazonia, while identifying the region's vulnerability to environmental change. 15%–18% of the most neglected areas in ecological research are expected to experience severe climate or land use changes by 2050. This means that unless we take immediate action, we will not be able to establish their current status, much less monitor how it is changing and what is being lost

Estudo das tensões em próteses sobre implantes esplintadas: análise pelo método da fotoelasticidade

Purpose: The purpose of this study was to evaluate the influence of different lengths and splinting of implants on stress distribution in implant-supported prostheses under axial and oblique loading by means of the method of photoelasticity. Materials and methods: 05 models in photoelastic resin was prepared with different proposed situations, there were 400 applications for load analysis. Tensions were considered quantitatively and qualitatively using a randomized, single blind method. The reproducibility of the study was assessed using the intra correlation coefficient, systematic error and random error. The analysis of variance to three criteria and post - Tukey tests were used, and p values > 0.05 was adopted to analyze the main differences. Results: The measurements showed a high intra-concordance coefficient (ICC> 0.97). The prosthetic implant splinting acted favorably in the distribution of stresses and strains in the transmission next to the implant (p0.05 foi adotado para analisar as principais diferenças. Resultados: As mensurações mostraram elevado coeficiente de concordância intraexaminador (CCI>0.97). A esplintagem de próteses implantossuportadas agiu favoravelmente na distribuição de tensões e na transmissão de tensões para o implante adjacente (p<0.001), quando comparado a próteses unitárias. O carregamento oblíquo foi mais prejudicial e, pontecializou a formação de tensões em implantes adjacentes (p<0.001). O aumento do comprimento foi um fator significante na avaliação dos modelos B e C (p=0.004), o modelo B apresentou maior concentração de franjas quando comparado com D e E (p<0.001). Conclusão: As próteses implantossuportadas esplintadas comportaram-se melhor biomecanicamente quando comparadas as próteses unitárias. O aumento do comprimento teve relevância na redução de tensões. O carregamento oblíquo foi mais prejudicial para a distribuição de tensões quando comparado com o carregamento axial

Deslocamento de implante dentário para o seio maxilar: relato de caso

The residual alveolar ridges may be unfavorable for implant placement. The edentulous maxilla is often challenging for the oral surgeon because of the lack of bone as a consequence of alveolar ridge resorption and/or maxillary sinus pneumatization. Accidents or complications may occur when some of these issues are not being known. This article reports one case of implant displaced into the maxillary sinus, 27 days after sinus bone augmentation with simultaneous dental implant installation, causing moderated sinusitis symptoms. The implant was removed through oral cavity access to maxillary sinus.Os rebordos alveolares residuais podem ser desfavoráveis para a colocação de implantes. A região posterior de maxila edêntula muitas vezes é desafiadora para o cirurgião oral devido à falta de osso, como conseqüência da reabsorção do rebordo alveolar e/ou pneumatização do seio maxilar. Acidentes ou complicações podem ocorrer quando algumas destas questões não são respeitadas. Este artigo relata um caso de implante deslocado para o interior do seio maxilar, 27 dias após a cirurgia de levantamento de assoalho de seio com instalação concomitante de implante dentário, causando quadro de sinusopatia leve. O implante foi removido por acesso ao seio maxilar por via intrabucal

Planejamento reverso em implantodontia: relato de caso clínico

The oral rehabilitation has achieved great prominence in the dental implant, especially in the cases of reposition of units dental elements, so it is possible to replace each missing element to implant into your space where the tooth was loss. The reverse planning is fundamental to an appropriate rehabilitation, because promote the elimination of problems that might compromise the aesthetics and function of future dental implants. The objective of this study was to report the treatment plan for a patient in need of oral rehabilitation with implant dental prosthesis, using indications and techniques based on the literature, emphasizing the importance of reverse planning. We conducted an osseointegrated implant surgery using the principles of a connect procedure, thus allowing their successfully installing increasing the predictability of treatment. It is concluded that the success of rehabilitation treatment is directly related to the initial planning, a correct clinical approach and an integrated multidisciplinary team.As reabilitações orais tem atingido grande destaque na implantodontia, principalmente quando se trata de elementos unitários a serem repostos, pois desse modo é possível substituir cada elemento perdido com implante no respectivo espaço onde houve a perda dental. O planejamento reverso do tratamento reabilitador é de suma importância, promovendo a eliminação de problemas que possam comprometer a estética e função das futuras restaurações implantossuportadas. Assim, o objetivo do presente trabalho foi relatar o plano de tratamento de uma paciente que necessita de reabilitação oral com próteses implantossuportadas, seguindo técnicas e indicações baseadas na literatura, enfatizando a importância do planejamento reverso. Realizou-se uma cirurgia com implantes osseointegráveis seguindo os princípios de uma correta instalação, ampliando-se a previsibilidade de tratamento. Concluiu-se que o sucesso do tratamento reabilitador está diretamente relacionado com o planejamento inicial, uma correta abordagem clínica e uma equipe multi-integrada

Photoelastic Analysis of Stress Distribution With Different Implant Systems

The aim of this study was to evaluate stress distribution with different implant systems through photoelasticity. Five models were fabricated with photoelastic resin PL-2. Each model was composed of a block of photoelastic resin (10 x 40 x 45 mm) with an implant and a healing abutment: model 1, internal hexagon implant (4.0 X 10 mm; Conect AR, Conexao, Sao Paulo, Brazil); model 2, Morse taper/internal octagon implant (4.1 x 10 mm; Standard, Straumann ITI, Andover, Mass); model 3, Morse taper implant (4.0 x 10 mm; AR Morse, Conexao); model 4, locking taper implant (4.0 x 11 mm; Bicon, Boston, Mass); model 5, external hexagon implant (4.0 x 10 mm; Master Screw, Conexao). Axial and oblique load (45) of 150 N were applied by a universal testing machine (EMIC-DL 3000), and a circular polariscope was used to visualize the stress. The results were photographed and analyzed qualitatively using Adobe Photoshop software. For the axial load, the greatest stress concentration was exhibited in the cervical and apical thirds. However, the highest number of isochromatic fringes was observed in the implant apex and in the cervical adjacent to the load direction in all models for the oblique load. Model 2 (Morse taper, internal octagon, Straumann ITI) presented the lowest stress concentration, while model 5 (external hexagon, Master Screw, Conexao) exhibited the greatest stress. It was concluded that Morse taper implants presented a more favorable stress distribution among the test groups. The external hexagon implant showed the highest stress concentration. Oblique load generated the highest stress in all models analyzed

Dental implant fractures: aetiology, treatment and case report

Purpose: This study aimed to investigate the etiology, clinical manifestations, and treatment options of dental implants fractures through a literature review and to relate a clinical report. Methods: A literature review was performed using the Medline database and this paper describes a case demonstrating the management of implant fracture. Twenty two articles were selected in the present literature review. Results: Nowadays the use of dental implants to rehabilitate completely and partially edentulous patients became the best treatment option; however, this treatment is suitable to failure. The fracture of implant body is a possible complication. The fracture of implant body is a late complication and is related to the failure in implant design or material, non-passive fitting of the prosthetic crown and overloading. Clinically, prosthesis instability and spontaneous bleeding are observed. Three options of treatment have been indicated: complete removal of implant fragment, maintenance of implant fragment, and surface preparation of the fragment with insertion of a new abutment. Conclusion: The literature indicates the complete removal of the fragment as the best treatment option