150 research outputs found
What type of innovative firms acquire knowledge intensive services and from which suppliers?
Knowledge intensive services (KIS) and, in particular, R&D services contribute significantly to innovation in firms. The objective of this paper is to find out which characteristics of firms explain the acquisition of R&D services and to analyse whether there are differences depending on the typology of the supplier (universities, technology centres and consulting firms). Three main conclusions emerge from the econometric estimations. Firstly, the results show that size and age matter in the decision to buy R&D services, but these characteristics of firms do not have any particular influence in the decision to choose a specific supplier. Secondly, our results are consistent with the relevance that the literature gives to human capital in absorbing external knowledge. The variables used to control for human skills have a positive effect on the decision to buy R&D services. On the contrary, the estimates of other variables that capture internal knowledge base suggest that there is a substitution process between internal R&D activities and acquiring R&D services. Thirdly, innovation policy has a significant influence on the decision to acquire R&D services.Knowledge intensive services; R&D services; universities; technology centres; consulting firms; innovation policy
(Per)versiones de la historia de EEUU en el cine de Lars Von Trier
I Congreso Internacional de Historia y Cine: 5, 6, 7 y 8 de Septiembre de 2007
Zelig o la deconstrucción del biopic
Actas del Segundo Congreso Internacional de Historia y Cine organizado por el Instituto de Cultura y Tecnología Miguel de Unamuno y celebrado del 9 al 11 de septiembre de 2010 en la Universidad Carlos III de MadridLa presente comunicación analiza la película Zelig (Woody Allen, 1983) en el marco de lo que podría denominarse Películas de (de)construcción histórica o Cine histórico posmoderno. Se estudia cómo este filme, ambientado en los años 20, 30 y 40, subvierte las convenciones del biopic y el documental a través de un inteligente despliegue de estrategias formales y narrativas, y cómo con ello cuestiona, desde una óptica eminentemente posmoderna, nociones asentadas en torno a la construcción identitaria, religiosa, política o nacional, así como el papel que en la configuración del proyecto moderno juegan instancias como la Ciencia o los medios de comunicación. Finalmente, se defiende que su rechazo de la univocidad de la interpretación supone una defensa de la libertad individual, la subjetividad, los sentimientos y el humor, frente a las amenazas típicamente modernas de la alienación colectiva, el positivismo científico a ultranza y los maximalismos totalitarios.This paper analyzes Woody Allen’s Zelig (1983) in the framework of what could be called Postmodern Historical Films. It shows how this film, set in the 1920’s, 30’s and 40’s, subverts the conventions of genres such as the biographical film and the documentary through a brilliant display of formal and narrative strategies. These ultimately question, from a typically postmodern approach, settled notions about the construction of identity, be it religious, political or national, as well as the role of certain institutions, like science or mass media, in the project of modernity. Last, it is argued that the film’s disapproval of any univocal characterization of interpretation represents a vindication of individual freedom, subjectivity, feelings and humour, against the typically modern threats of collective alienation, overstated scientific positivism, and maximalist, totalitarian positionsPublicad
Mass communication and structural violence
Este trabajo conecta dos dimensiones de la violencia que están presentes en los estudios sobre Investigación para la Paz. A partir de la conocida clasificación de Galtung, en este ensayo abordamos dos tipos de violencia: la estructural (exclusión, desigualdad) y la cultural (o legitimación de la violencia). Del cruce entre tres ámbitos de exclusión comunicativa y los tres modelos que abordan la desigualdad en la comunicación, se obtienen las líneas de investigación que se proponen para el estudio de la desigualdad en el ámbito comunicativo. Es una reflexión teórica que atiende a las diferentes metodologías empleadas en el estudio del fenómeno comunicativo y que pueden ser productivas para el estudio de la desigualdad en el ámbito cultural.This paper connects two dimensions of violence present in the Peace Research Studies. From Galtung’s known classification, in this essay we connect two types of violence: the structural (exclusion, inequality) and the cultural (or legitimization of the violence). From the overlapping of three spheres of communicative exclusion with three models which approach the inequality in communication, we obtain the lines of investigation we propose for the study of the inequality in the communicative area. It is a theoretical reflection that pays attention to the different methodologies used in the study of the communicative phenomenon and their usefulness for the study of inequality in the cultural area
What type of innovative firms acquire knowledge intensive services and from which suppliers?
Knowledge intensive services (KIS) and, in particular, R&D services contribute significantly to innovation in firms. The objective of this paper is to find out which characteristics of firms explain the acquisition of R&D services and to analyse whether there are differences depending on the typology of the supplier (universities, technology centres and consulting firms). Three main conclusions emerge from the econometric estimations. Firstly, the results show that size and age matter in the decision to buy R&D services, but these characteristics of firms do not have any particular influence in the decision to choose a specific supplier. Secondly, our results are consistent with the relevance that the literature gives to human capital in absorbing external knowledge. The variables used to control for human skills have a positive effect on the decision to buy R&D services. On the contrary, the estimates of other variables that capture internal knowledge base suggest that there is a substitution process between internal R&D activities and acquiring R&D services. Thirdly, innovation policy has a significant influence on the decision to acquire R&D services
Mejora de una herramienta de diagnóstico de la combustión a partir de la presión instantánea en cámara mediante la incorporación de un modelo de tumble
[ES] Este proyecto representa la memoria de un Trabajo de Fin de Master de la titulación Master en
Ingeniería Industrial.
A lo largo de los diferentes apartados que lo forman, se relata brevemente el trabajo realizado en
estos últimos seis meses, así como las conclusiones y resultados obtenidos tras la ejecución del
proyecto. También se explican los problemas que han ido surgiendo y las soluciones adoptadas.
El objetivo de la memoria es el planteamiento de un nuevo modelo teórico que permita describir la
influencia que tiene el movimiento del gas en la cámara de combustión de un MCIA en la
transmisión de calor. En concreto, se ha estudiado el movimiento de tumble en un motor diésel de
2T. Con este modelo se pretende mejorar lo implementado actualmente en la herramienta de
diagnóstico de motores CALMEC.
Desde que el gas entra en la cámara de combustión durante la fase de admisión, una estructura más
o menos definida comienza a desarrollarse. A medida que avanza el ciclo el movimiento de tumble
se hace más intenso hasta que, durante la fase de compresión, empieza su decaimiento
desapareciendo el patrón de movimiento unos grados antes del PMS. A diferencia del movimiento
de tumble, el swirl alcanza su máximo en torno al PMS y es por esto que se necesita otro modelo
para describir la transmisión de calor en el caso de que exista un movimiento de tumble.
El modelo planteado es una modificación del modelo implementado para el caso de swirl. En el
modelo de Woschni, el coeficiente de película depende de la velocidad del gas; que a su vez
depende de la velocidad media del pistón, de la combustión y de la velocidad tangencial del gas
debida a un movimiento del swirl. La ecuación además incluye unas constantes llamadas Cw1,
Cw2 y C2 que ponderan la influencia de cada uno de los términos y sirven para ajustar el modelo
teórico al motor ensayado.
En el caso del modelo propuesto, la velocidad tangencial del gas es el resultado del producto de una
velocidad tangencial media por una función matemática que modela el comportamiento del
fenómeno de tumble en función del ángulo del cigüeñal. Esta velocidad tangencial media será
proporcional a la velocidad del motor y al coeficiente de tumble medio.
Después de implementar el modelo en la herramienta de diagnóstico y ver los resultados ofrecidos
por este en un ensayo de arrastre, se puede concluir que el modelo se ajusta con exactitud al calor
predicho por el método del exponente politrópico, independientemente del régimen del motor.
Por último se ha realizado un estudio de sensibilidad del modelo propuesto frente a errores en
alguna de las variables de entrada o en la determinación de alguno de los parámetros del modelo;
tanto antes de realizar el proceso de ajuste como después de ajustar las constantes del modelo al
motor ensayado.
En el primero de los casos, el motor se muestra sensible frente a incertidumbres en alguno de los
parámetros del modelo, mientras que tras el ajuste de las constantes del modelo, este muestra ser
robusto frente a cualquier variación.[CA] Aquest projecte representa la memòria d'un Treball de Fi de Màster de la titulació Màster en
Enginyeria Industrial.
Al llarg dels diferents apartats que el formen, es relata breument el treball realitzat en aquests
últims sis mesos, així com les conclusions i resultats obtinguts després de l'execució del projecte.
També s'expliquen els problemes que han anat sorgint i les solucions adoptades.
L'objectiu de la memòria és el plantejament d'un nou model teòric que permeta descriure la
influència que té el moviment de tumble del gas dins la cambra de combustió en la transmissió de
calor i que millore el que està implementat actualment en el programa de diagnòstic de la
combustió en motors CALMEC.
Des que el gas entra a la cambra durant la fase d'admissió una estructura més o menys definida
comença a desenvolupar-se. A mesura que avança el cicle el moviment de tumble es fa més intens.
Durant la fase de compressió comença el seu decaïment, fins que el patró de moviment desapareix
uns graus abans del PMS. A diferència del moviment de tumble, el swirl arriba al seu màxim al
voltant del PMS. És per això que es necessita un altre model per descriure la transmissió de calor
en el cas de tumble.
El model plantejat és una modificació de l'equació original plantejada per Woschni per al cas de
swirl. En el model de Woschni, el coeficient de pel·lícula depén de la velocitat del gas que al seu
torn depén d'un terme proporcional a la velocitat mitjana del pistó, un terme que considera la
combustió i un últim terme que es refereix a la velocitat tangencial del gas pel moviment del swirl.
L'equació, a més, inclou unes constants anomenades CW1, CW2 i C2 que ponderen la influència
de cada un dels termes i serveixen per a ajustar el model teòric al motor assajat.
En el cas del model proposat, la velocitat tangencial del gas és el resultat del producte d'una
velocitat tangencial mitjana per una funció matemàtica que representa el comportament del
fenomen de tumble en funció de l'angle del cigonyal. Aquesta velocitat tangencial mitjana serà
proporcional a la velocitat del motor i al coeficient de tumble mig.
Després d'implementar el model i veure els resultats oferts per aquest en un assaig d'arrossegament,
es pot concloure que el model s'ajusta amb exactitud a la calor predita pel mètode de l'exponent
politròpic independentment del règim del motor.
Finalment s'ha realitzat un estudi de sensibilitat del model proposat respecte a errors en alguna de
les variables d'entrada o en la determinació d'algun dels paràmetres del model; tant abans de
realitzar el procés d'ajust com després d'ajustar les constants del model al motor assajat.
En el primer dels casos, el motor es mostra sensible a l’error en algun dels paràmetres del model,
mentre que després de l'ajust de les constants del model, aquest mostra ser robust davant de
qualsevol variació.[EN] This project represents the memory of a Master's Thesis as the last step to complete the Master of
Industrial Engineering.
Throughout the different sections that form the document, it briefly describes the work done in the
last six months, as well as the conclusions and results obtained after the execution of the project. It
also explains the problems that have appeared and the solutions adopted.
The purpose of the report is to propose a new theoretical model that allows to describe the
influence of the tumble gas movement inside the chamber in the heat transfer that occurs and
improve what is currently implemented in the CALMEC engine diagnostic’s tool.
Since the gas enters the chamber during the intake phase, a more or less defined structure begins to
develop. As the cycle progresses, the tumble movement becomes more intense. During the
compression phase, its decay begins, the movement pattern disappears a few degrees before the
TDC. Unlike the tumble movement, the swirl reaches its maximum around the TDC. Therefore,
another model is needed to describe the heat transfer in the tumble case.
The proposed model is a modification of the original equation proposed by Woschni for the swirl
case. In the Woschni model, the heat transfer coefficient depends on the velocity of the gas, which
in turn depends on a term proportional to the average speed of the piston, a term due to combustion
and a last term referring to the tangential velocity of the gas due to the swirl movement. The
equation also includes some constants called Cw1, Cw2 and C2 that weight the influence of each of
the terms and whose objective is to adjust the theoretical model to the specific engine tested.
In the case of the proposed model, the tangential gas velocity is the product of a mean tangential
velocity and a mathematical function that represents the behaviour of the tumble phenomenon as a
function of the crankshaft angle. The mean tangential velocity is proportional to the engine speed
and the mean tumble ratio.
After implementing the model and analysing the results provided by the model in a motoring test, it
can be concluded that the model is accurately adjusted to the heat predicted by the method of the
polytrophic exponent regardless of the engine speed.
Finally, two sensitivity studies of the proposed model have been carried out taking into account
uncertainties in some of the input variables or in the determination of some of the parameters of the
model; one of them before performing the fitting process and the other, after fitting the model
constants to the engine tested.
In the first case, the motor is sensitive to errors in the definition of some of the parameters that
govern the model, while after adjusting the constants of the model, the model shows to be robust
against any perturbation.Verdú Torres, D. (2017). Mejora de una herramienta de diagnóstico de la combustión a partir de la presión instantánea en cámara mediante la incorporación de un modelo de tumble. http://hdl.handle.net/10251/81067.TFG
Proposta d’organització que permitisca la millora de la situación fiscal per als musics a la Comunitat Valenciana
[ES] La música forma parte de la cultura valenciana. Los músicos o “els musics de carrer”
llevan muchos preservando la cultura de varias fiestas tradicionales únicas en toda
España.
La Comunidad Valenciana, es la comunidad con más sociedades musicales federadas;
cuenta con 550 sociedades y más de 25.000 músicos.
En la sociedad musical de la Comunidad Valenciana se reconoce cuatro grandes fiestas
al año: Las Fallas de Valencia, Hogueras de Alicante la Magdalena de Castelló y las fiestas
de Moros y cristianos.
Tradicionalmente, los músicos eran en mayor medida; campesinos, agricultores,
ganaderos que aprovechaban la música para obtener un dinero extra y las tradiciones
musicales pasaban de padres a hijos.
Hoy en día, el sector, las sociedades y la cultura musicales de la Comunidad Valenciana
se están viendo inmersas en una etapa de declive. La Agencia Tributaria ha advertido
que tiene que haber una regulación para los músicos. La federación aún no ha
encontrado una solución que contente a todas las partes interesadas.
Este trabajo de final de grado (TFG) tiene por objetivo realizar una propuesta de
organización o empresa que permita regularizar la situación fiscal actual de “els musics
pág. 1
de carrer”. Se analizará la problemática fiscal existente, se identificarán las partes
interesadas y sus características.[EN] Music is part of the Valencian culture. Musicians or "els musics de carrer" have been
preserving the culture of several traditional festivals unique throughout Spain.
The Valencian Community is the community with the most federated musical societies;
it has 550 societies and more than 25,000 musicians.
In the musical society of the Valencian community four great festivals are recognized
per year: The Fallas of Valencia, Bonfires of Alicante the Magdalena of Castelló and the
festivities of Moors and Christians.
The "musical calendar" covers the calendar year with different events from typical
parties to personal events, such as weddings, bachelorette parties and others.
Today, the sector, societies and musical culture of the Valencian community are being
immersed in a stage of decline.
The Agencia Tributaria has warned that there must be a regulation for musicians. The
federation has not yet found a solution that will please all stakeholders.
This final degree project (TFG) aims to make a proposal for an organization or company
that allows regularizing the current fiscal situation of "els musics de carrer". The existing
tax problems will be analyzed, the interested parties and their characteristics will be
identified, alternatives.Guarner Verdú, D. (2022). Propuesta de organización que permita la mejora de la situación fiscal para los músicos de la Comunidad Valenciana. Universitat Politècnica de València. http://hdl.handle.net/10251/186581TFG
Tecnología open-hardware para la parametrización ambiental en aplicaciones de Ingeniería
El desarrollo del open-hardware ha proporcionado una nueva herramienta para mejorar el sistema de monitorización de otros sistemas. En la actualidad la sociedad está inmersa en una implementación de sistemas capaces de proporcionar una gran cantidad de datos del entorno, los cuales nos ayudan al estudio y entendimiento de este. En esta tesis doctoral se estudia la capacidad de estas plataformas libres en tres campos como son el Agronómico , Conservación Cultural e Industrial. Se ha procedido a una comprobación y una validación posterior en cada uno de los campos anteriormente citados. Los resultados obtenidos han sido positivos, siendo similares a los obtenidos por equipos comerciales. Esto nos lleva a la conclusión de que estas nuevas plataformas son el futuro, no sólo por su menor precio, sino por su gran capacidad de modificación y adaptación que las plataformas comerciales cerradas no permiten.The development of open hardware has provided new tool to improve system to monitor other system. Nowadays the society is immersed in an implementation of systems provide a large amount of data of the environment, which help us to study and understand it. This doctoral thesis studies the capacity of these free platforms in three differents scenarios as Agronomic, Cultural Heritage and Industrial. A pre-selection of the components and a subsequent verification and validation has been carried out in each of the aforementioned fields. The result obtained have been positives, being similar to those obtained by commercial equipment. This leads us to the conclusion that these new platforms are the future, not only for its lower price, but for its great capacity of modification and adaptation that the closed commercial platforms do not allow
Antioxidant and Antidiabetic Properties of Phlorotannins from Ascophyllum nodosum Seaweed Extracts
Seaweeds have gained considerable attention in recent years due to their potential health benefits and high contents of bioactive compounds. This review focuses on the exploration of seaweed’s health-promoting properties, with particular emphasis on phlorotannins, a class of bioactive compounds known for their antioxidant and antidiabetic properties. Various novel and ecofriendly extraction methods, including solid–liquid extraction, ultrasound-assisted extraction, and microwave-assisted extraction are examined for their effectiveness in isolating phlorotannins. The chemical structure and isolation of phlorotannins are discussed, along with methods for their characterization, such as spectrophotometry, nuclear magnetic resonance, Fourier transform infrared spectroscopy, and chromatography. Special attention is given to the antioxidant activity of phlorotannins. The inhibitory capacities of polyphenols, specifically phlorotannins from Ascophyllum nodosum against digestive enzymes, such as α-amylase and α-glucosidase, are explored. The results suggest that polyphenols from Ascophyllum nodosum seaweed hold significant potential as enzyme inhibitors, although the inhibitory activity may vary depending on the extraction conditions and the specific enzyme involved. In conclusion, seaweed exhibits great potential as a functional food ingredient for promoting health and preventing chronic diseases. Overall, this review aims to condense a comprehensive collection of high-yield, low-cost, and ecofriendly extraction methods for obtaining phlorotannins with remarkable antioxidant and antidiabetic capacities.This work was funded by the Ministry of Science and Innovation of Spain and European Regional Development Fund (ERDF) of European Union by the research project (RTI2018-095919-B-C2).S
Conversion of a digital camera into a non-contact colorimeter for use in stone cultural heritage: The application case to Spanish granites
In this study, a digital CMOS camera was calibrated for use as a non-contact colorimeter for measuring the color of granite artworks. The low chroma values of the granite, which yield similar stimulation of the three color channels of the camera, proved to be the most challenging aspect of the task. The appropriate parameters for converting the device-dependent RGB color space into a device-independent color space were established. For this purpose, the color of a large number of Munsell samples (corresponding to the previously defined color gamut of granite) was measured with a digital camera and with a spectrophotometer (reference instrument). The color data were then compared using the CIELAB color formulae. The best correlations between measurements were obtained when the camera works to 10-bits and the spectrophotometric measures in SCI mode. Finally, the calibrated instrument was used successfully to measure the color of six commercial varieties of Spanish granite.The present study was financially supported by the Xunta de Galicia (09TMT014203PR) and the European Union and Spanish Ministry of Economy and Competitiveness under grants DPI2008-06455-C02-02 and DPI2011-30090-C02-02. Dr. Patricia Sanmartín acknowledges a scholarship for postgraduate studies abroad (2012 Call) from Barrié de la Maza Foundation. She is currently supported by a postdoctoral contract within the framework of the 2011–2015 Galician Plan for Research, Innovation and Growth (Plan I2C) for the year 2012
- …