Understanding the growth of the bio-struvite production Brevibacterium antiquum in sludge liquors

Biological struvite (bio-struvite) production through biomineralization has been suggested as an alternative to chemically derived struvite production to recover phosphorus from wastewater streams. In this study, statistical experimental design techniques were used to find the optimal growth rate (μ) of Brevibacterium antiquum in sludge liquors. Acetate, oleic acid, NaCl, NH4-N, and Ca2+ were shown to affect the growth rate of B. antiquum. The growth rate reached 3.44 1/d when the bacteria were supplemented with 3.0% w/v NaCl and 1124 mg chemical oxygen demand/L as acetate. However, NaCl was found to hinder the biomineralization of bio-struvite. A two-stage experiment demonstrated that bio-struvite was produced in the presence of acetate. Bio-struvite production was confirmed with X-ray spectroscopy and crystal morphology (prismatic, tabular, and twinned crystal habit) through electron microscope analysis. The bio-struvite production was estimated by measuring phosphate content of the recovered precipitates, reaching 9.6 mg P/L as bio-struvite. Overall, these results demonstrated the optimal conditions required to achieve high growth rates as well as bio-struvite production with B. antiquum. The results obtained in this study could be used to develop a process to grow B. antiquum in wastewater streams in mixed cultures and recover phosphorus-rich products such as struvite

Radio-Frequency communication in a SCADA system for the monitoring and control of intelligent building and office blocks

The efficient use of electricity and how people approach it, is a topic that has a big impact on the environment and society. The consumption management will be improved by the monitoring and the controlling of electrical installations. Communication is a key part in this process and that is why the improvement of data transmission is very important to obtain a controlled process. Transferring data is achieved by sending an electromagnetic signal by means of different types of communications channels. This paper presents a connection between a superior network and an external one to create the possibility of monitoring and controlling devices linked to the networks in a research institution (GECAD). The communication devices used are modems which use radio waves to make the transmission. A program has been created to access the data of an energy meter to obtain knowledge on how to implement analyzers in a SCADA system to improve monitoring of an electrical installation. This assignment will achieve a better understanding of the different protocols and operation modes.This work has received funding from the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No 641794 (project DREAMGO) and from FEDER Funds through COMPETE program and from National Funds through FCT, under the project UID/EEA/00760/2013.info:eu-repo/semantics/publishedVersio

The role of pH on the biological struvite production in digested sludge dewatering liquors

Struvite production mediated by bacteria has opened up a new route for phosphorus recovery from wastewater streams but its application to digested sludge dewatering liquors is not yet well understood. This study investigates the growth and biological struvite production of selected bacteria in wastewater liquors with pHs between 5.7 to 9.1. The bacterial growth was assessed through flow cytometry. Bacillus pumilus, Halobacterium salinarum and Brevibacterium antiquum remained viable at pHs between 5.7 to 9.1 but B. antiquum was able to grow at pHs between 7.3 to 7.8. Further analysis allowed the identification of crystals as struvite in tests between pH 7.3 to 8.3. All strains were capable of producing struvite at a range of pHs, but the highest production of 135–198 mg/L was observed for pHs between 7.3 to 8.3. At pHs > 8.3, precipitation of struvite and calcium compounds was observed in inoculated and non-inoculated tests. This study demonstrates that biological struvite production can occur at a wide range of pHs, hence significantly different from chemical struvite precipitation that occurs at pH > 8.3, making it a potentially viable process for phosphorus recovery as struvite from wastewater streams and sludge liquors without strict pH control

Successfully resisting a pathogen is rarely costly in Daphnia magna

<p>Abstract</p> <p>Background</p> <p>A central hypothesis in the evolutionary ecology of parasitism is that trade-offs exist between resistance to parasites and other fitness components such as fecundity, growth, survival, and predator avoidance, or resistance to other parasites. These trade-offs are called costs of resistance. These costs fall into two broad categories: constitutive costs of resistance, which arise from a negative genetic covariance between immunity and other fitness-related traits, and inducible costs of resistance, which are the physiological costs incurred by hosts when mounting an immune response. We sought to study inducible costs in depth using the crustacean <it>Daphnia magna </it>and its bacterial parasite <it>Pasteuria ramosa</it>.</p> <p>Results</p> <p>We designed specific experiments to study the costs induced by exposure to this parasite, and we re-analysed previously published data in an effort to determine the generality of such costs. However, despite the variety of genetic backgrounds of both hosts and parasites, and the different exposure protocols and environmental conditions used in these experiment, this work showed that costs of exposure can only rarely be detected in the <it>D. magna-P. ramosa </it>system.</p> <p>Conclusions</p> <p>We discuss possible reasons for this lack of detectable costs, including scenarios where costs of resistance to parasites might not play a major role in the co-evolution of hosts and parasites.</p

Carry on caring:Infected females maintain their parental care despite high mortality

Parental care is a key component of an organism’s reproductive strategy that is thought to trade-off with allocation toward immunity. Yet, it is unclear how caring parents respond to pathogens: do infected parents reduce care as a sickness behavior or simply from being ill or do they prioritize their offspring by maintaining high levels of care? To address this issue, we investigated the consequences of infection by the pathogen Serratia marcescens on mortality, time spent providing care, reproductive output, and expression of immune genes of female parents in the burying beetle Nicrophorus vespilloides. We compared untreated control females with infected females that were inoculated with live bacteria, immune-challenged females that were inoculated with heat-killed bacteria, and injured females that were injected with buffer. We found that infected and immune-challenged females changed their immune gene expression and that infected females suffered increased mortality. Nevertheless, infected and immune-challenged females maintained their normal level of care and reproductive output. There was thus no evidence that infection led to either a decrease or an increase in parental care or reproductive output. Our results show that parental care, which is generally highly flexible, can remain remarkably robust and consistent despite the elevated mortality caused by infection by pathogens. Overall, these findings suggest that infected females maintain a high level of parental care, a strategy that may ensure that offspring receive the necessary amount of care but that might be detrimental to the parents’ own survival or that may even facilitate disease transmission to offspring

Enhancement of cargo processivity by cooperating molecular motors

Cellular cargo can be bound to cytoskeletal filaments by one or multiple active or passive molecular motors. Recent experiments have shown that the presence of auxiliary, nondriving motors, results in an enhanced processivity of the cargo, compared to the case of a single active motor alone. We model the observed cooperative transport process using a stochastic model that describes the dynamics of two molecular motors, an active one that moves cargo unidirectionally along a filament track and a passive one that acts as a tether. Analytical expressions obtained from our analysis are fit to experimental data to estimate the microscopic kinetic parameters of our model. Our analysis reveals two qualitatively distinct processivity-enhancing mechanisms: the passive tether can decrease the typical detachment rate of the active motor from the filament track or it can increase the corresponding reattachment rate. Our estimates unambiguously show that in the case of microtubular transport, a higher average run length arises mainly from the ability of the passive motor to keep the cargo close to the filament, enhancing the reattachment rate of an active kinesin motor that has recently detached. Instead, for myosin-driven transport along actin, the passive motor tightly tethers the cargo to the filament, suppressing the detachment rate of the active myosin.Comment: 11 pages, 8 figures, submitted to PCC

Predicting the potential of sludge dewatering liquors to recover nutrients as struvite biominerals

Phosphorus and nutrient recovery from wastewater as mineral salts can support local replenishment of fertilisers and reduce mining, contributing to the circular economy. Wastewater and related streams are rich in nutrients, however; there is need to develop bio-based processes to recover them. This study investigates the fractions of phosphorus (P) used by Brevibacterium antiquum to form struvite biominerals (bio-struvite) in wastewater sludge dewatering liquors. After 72h of incubation, 25.6 mg P/L were recovered as bio-struvite from 12.4 mg P/L organic plus condensed P and 13.2 mg P/L of ortho-phosphate. The potential of sludge dewatering liquors to recover nutrients as struvite was investigated by characterising ten types of sludge liquors (originating from primary, secondary sludge, feed to anaerobic digester and digestate, from 3 types of wastewater treatment plants) for their P fractions together with other parameters relevant for B. antiquum growth. Results indicated that liquors obtained from primary sludge, feed to anaerobic digesters and digestate were the most suitable to produce bio-struvite, as these were found to frequently have a high content of organic and condensed P, between to 276–732 mg P/L. Liquors, from all the investigated sites, presented a higher potential for bio-struvite production than with conventional struvite precipitation. This study demonstrated that B. antiquum could convert organic and condensed P into bio-struvite, and this opens up a completely new way to recover forms of phosphorus that are not typically available for nutrient recovery in a single proces

Novel efficient technologies in Europe for axle bearing condition monitoring – the MAXBE project

Axle bearing damage with possible catastrophic failures can cause severe disruptions or even dangerous derailments, potentially causing loss of human life and leading to significant costs for railway infrastructure managers and rolling stock operators. Consequently the axle bearing damage process has safety and economic implications on the exploitation of railways systems. Therefore it has been the object of intense attention by railway authorities as proved by the selection of this topic by the European Commission in calls for research proposals. The MAXBE Project (http://www.maxbeproject.eu/), an EU-funded project, appears in this context and its main goal is to develop and to demonstrate innovative and efficient technologies which can be used for the onboard and wayside condition monitoring of axle bearings. The MAXBE (interoperable monitoring, diagnosis and maintenance strategies for axle bearings) project focuses on detecting axle bearing failure modes at an early stage by combining new and existing monitoring techniques and on characterizing the axle bearing degradation process. The consortium for the MAXBE project comprises 18 partners from 8 member states, representing operators, railway administrations, axle bearing manufactures, key players in the railway community and experts in the field of monitoring, maintenance and rolling stock. The University of Porto is coordinating this research project that kicked-off in November 2012 and it is completed on October 2015. Both on-board and wayside systems are explored in the project since there is a need for defining the requirement for the onboard equipment and the range of working temperatures of the axle bearing for the wayside systems. The developed monitoring systems consider strain gauges, high frequency accelerometers, temperature sensors and acoustic emission. To get a robust technology to support the decision making of the responsible stakeholders synchronized measurements from onboard and wayside monitoring systems are integrated into a platform. Also extensive laboratory tests were performed to correlate the in situ measurements to the status of the axle bearing life. With the MAXBE project concept it will be possible: to contribute to detect at an early stage axle bearing failures; to create conditions for the operational and technical integration of axle bearing monitoring and maintenance in different European railway networks; to contribute to the standardization of the requirements for the axle bearing monitoring, diagnosis and maintenance. Demonstration of the developed condition monitoring systems was performed in Portugal in the Northern Railway Line with freight and passenger traffic with a maximum speed of 220 km/h, in Belgium in a tram line and in the UK. Still within the project, a tool for optimal maintenance scheduling and a smart diagnostic tool were developed. This paper presents a synthesis of the most relevant results attained in the project. The successful of the project and the developed solutions have positive impact on the reliability, availability, maintainability and safety of rolling stock and infrastructure with main focus on the axle bearing health

Changing healthcare professionals' non-reflective processes to improve the quality of care

Rationale. Translating research evidence into clinical practice to improve care involves healthcare professionals adopting new behaviours and changing or stopping their existing behaviours. However, changing healthcare professional behaviour can be difficult, particularly when it involves changing repetitive, ingrained ways of providing care. There is an increasing focus on understanding healthcare professional behaviour in terms of non-reflective processes, such as habits and routines, in addition to the more often studied deliberative processes. Theories of habit and routine provide two complementary lenses for understanding healthcare professional behaviour, although to date, each perspective has only been applied in isolation. Objectives To combine theories of habit and routine to generate a broader understanding of healthcare professional behaviour and how it might be changed. Methods Sixteen experts met for a two-day multidisciplinary workshop on how to advance implementation science by developing greater understanding of non-reflective processes. Results From a psychological perspective ‘habit’ is understood as a process that maintains ingrained behaviour through a learned link between contextual cues and behaviours that have become associated with those cues. Theories of habit are useful for understanding the individual's role in developing and maintaining specific ways of working. Theories of routine add to this perspective by describing how clinical practices are formed, adapted, reinforced and discontinued in and through interactions with colleagues, systems and organisational procedures. We suggest a selection of theory-based strategies to advance understanding of healthcare professionals' habits and routines and how to change them. Conclusion Combining theories of habit and routines has the potential to advance implementation science by providing a fuller understanding of the range of factors, operating at multiple levels of analysis, which can impact on the behaviours of healthcare professionals, and so quality of care provision.Peer reviewe

Puerto Rican Karst - A Vital Resource

The limestone region of Puerto Rico covers about 27.5 percent of the island\u27s surface and is subdivided into the northern, southern, and dispersed limestone areas. All limestone areas have karst features. The karst belt is that part of the northern limestone with the most spectacular surficial karst landforms. It covers 142,544 ha or 65 percent of the northern limestone. The karst belt is the focus of this publication, although reference is made to all limestone regions. The northern limestone contains Puerto Rico\u27s most extensive freshwater aquifer, largest continuous expanse of mature forest, and largest coastal wetland, estuary, and underground cave systems. The karst belt is extremely diverse, and its multiple landforms, concentrated in such a small area, make it unique in the world. Puerto Rico\u27s karst forests whether dry, moist, or wet share common physiognomic and structural characteristics. Karst forests contain the largest reported number of tree species per unit area in Puerto Rico. Both fauna and flora are rich in taxa; and many rare, threatened, endangered, and migratory species find refuge in the karst belt. Almost all fossil records of Puerto Rico\u27s extinct flora and fauna come from the karst belt