Thermal fluctuations in capillary thinning of thin liquid films

Thermal fluctuations have been shown to influence the thinning dynamics of planar thin liquid films, bringing predicted rupture times closer to experiments. Most liquid films in nature and industry are, however, non-planar. Thinning of such films not just results from the interplay between stabilizing surface tension forces and destabilizing van der Waals forces, but also from drainage due to curvature differences. This work explores the influence of thermal fluctuations on the dynamics of thin non-planar films subjected to drainage, with their dynamics governed by two parameters: the strength of thermal fluctuations,  , and the strength of drainage,  . For strong drainage ( ≫tr ), we find that the film ruptures due to the formation of a local depression called a dimple that appears at the connection between the curved and flat parts of the film. For this dimple-dominated regime, the rupture time, tr , solely depends on  , according to the earlier reported scaling, tr∼−10/7 . By contrast, for weak drainage ( ≪tr ), the film ruptures at a random location due to the spontaneous growth of fluctuations originating from thermal fluctuations. In this fluctuations-dominated regime, the rupture time solely depends on  as tr∼−(1/max)ln⁡(2) , with =1.15 . This scaling is rationalized using linear stability theory, which yields max as the growth rate of the fastest-growing wave and =1 . These insights on if, when and how thermal fluctuations play a role are instrumental in predicting the dynamics and rupture time of non-flat draining thin films

Use of a porous membrane for gas bubble removal in microfluidic channels: physical mechanisms and design criteria

We demonstrate and explain a simple and efficient way to remove gas bubbles from liquid-filled microchannels, by integrating a hydrophobic porous membrane on top of the microchannel. A prototype chip is manufactured in hard, transparent polymer with the ability to completely filter gas plugs out of a segmented flow at rates up to 7.4 microliter/s per mm2 of membrane area. The device involves a bubble generation section and a gas removal section. In the bubble generation section, a T-junction is used to generate a train of gas plugs into a water stream. These gas plugs are then transported towards the gas removal section, where they slide along a hydrophobic membrane until complete removal. The system has been successfully modeled and four necessary operating criteria have been determined to achieve a complete separation of the gas from the liquid. The first criterion is that the bubble length needs to be larger than the channel diameter. The second criterion is that the gas plug should stay on the membrane for a time sufficient to transport all the gas through the membrane. The third criterion is that the gas plug travel speed should be lower than a critical value: otherwise a stable liquid film between the bubble and the membrane prevents mass transfer. The fourth criterion is that the pressure difference across the membrane should not be larger than the Laplace pressure to prevent water from leaking through the membrane

Breakup of elongated droplets in microfluidic T-junctions

We show experimentally, and explain theoretically, what velocity is needed to break an elongated droplet entering a microfluidic T-junction. Our experiments on short droplets confirm previous experimental and theoretical work that shows that the critical velocity for breakup scales with the inverse of the length of the droplet raised to the fifth power. For long elongated droplets that have a length about thrice the channel width, we reveal a drastically different scaling Taking into account that a long droplet remains squeezed between the channel walls when it enters a T-j unction, such that the gutters in the corners of the channel are the main route for the continuous phase to flow around the droplet, we developed a model that explains that the critical velocity for breakup is inversely proportional to the droplet length. This model for the transition between breaking and nonbreaking droplets is in excellent agreement with our experiments.FWN – Publicaties zonder aanstelling Universiteit Leide

Dynamics of droplet formation at T-shaped nozzles with elastic feed lines

We describe the formation of water in oil droplets, which are commonly used in lab-on-a-chip systems for sample generation and dosing, at microfluidic T-shaped nozzles from elastic feed lines. A narrow nozzle forms a barrier for a liquid-liquid interface, such that pressure can build up behind the nozzle up to a critical pressure. Above this critical pressure, the liquid bursts into the main channel. Build-up of pressure is possible when the fluid before the nozzle is compressible or when the channel that leads to the nozzle is elastic. We explore the value of the critical pressure and the time required to achieve it. We describe the fluid flow of the sudden burst, globally in terms of flow rate into the channel and spatially resolved in terms of flow fields measured using micro-PIV. A total of three different stages-the lag phase, a spill out phase, and a linear growth phase-can be clearly discriminated during droplet formation. The lag time linearly scales with the curvature of the interface inside the nozzle and is inversly proportional to the flow rate of the dispersed phase. A complete overview of the evolution of the growth of droplets and the internal flow structure is provided in the digital supplement.FWN – Publicaties zonder aanstelling Universiteit Leide

Transcriptomic and functional analysis of the Anopheles gambiae salivary gland in relation to blood feeding

<p>Abstract</p> <p>Background</p> <p>The <it>Anopheles gambiae </it>salivary glands play a major role in malaria transmission and express a variety of bioactive components that facilitate blood-feeding by preventing platelet aggregation, blood clotting, vasodilatation, and inflammatory and other reactions at the probing site on the vertebrate host.</p> <p>Results</p> <p>We have performed a global transcriptome analysis of the <it>A. gambiae </it>salivary gland response to blood-feeding, to identify candidate genes that are involved in hematophagy. A total of 4,978 genes were found to be transcribed in this tissue. A comparison of salivary gland transcriptomes prior to and after blood-feeding identified 52 and 41 transcripts that were significantly up-regulated and down-regulated, respectively. Ten genes were further selected to assess their role in the blood-feeding process using RNAi-mediated gene silencing methodology. Depletion of the salivary gland genes encoding <it>D7L2</it>, <it>anophelin</it>, <it>peroxidase</it>, the <it>SG2 precursor</it>, and a <it>5'nucleotidase </it>gene significantly increased probing time of <it>A. gambiae </it>mosquitoes and thereby their capacity to blood-feed.</p> <p>Conclusions</p> <p>The salivary gland transcriptome comprises approximately 38% of the total mosquito transcriptome and a small proportion of it is dynamically changing already at two hours in response to blood feeding. A better understanding of the salivary gland transcriptome and its function can contribute to the development of pathogen transmission control strategies and the identification of medically relevant bioactive compounds.</p

Urinary extracellular vesicles: A position paper by the Urine Task Force of the International Society for Extracellular Vesicles

Urine is commonly used for clinical diagnosis and biomedical research. The discovery of extracellular vesicles (EV) in urine opened a new fast-growing scientific field. In the last decade urinary extracellular vesicles (uEVs) were shown to mirror molecular processes as well as physiological and pathological conditions in kidney, urothelial and prostate tissue. Therefore, several methods to isolate and characterize uEVs have been developed. However, methodological aspects of EV separation and analysis, including normalization of results, need further optimization and standardization to foster scientific advances in uEV research and a subsequent successful translation into clinical practice. This position paper is written by the Urine Task Force of the Rigor and Standardization Subcommittee of ISEV consisting of nephrologists, urologists, cardiologists and biologists with active experience in uEV research. Our aim is to present the state of the art and identify challenges and gaps in current uEV-based analyses for clinical applications. Finally, recommendations for improved rigor, reproducibility and interoperability in uEV research are provided in order to facilitate advances in the field

The Technology Integration Model (TIM): predicting the continued use of technology

The human-computer relationship is often convoluted and despite decades of progress, many relation- ships relating to continued use are unclear and poorly defined. This may be due to a lack of interdisci- plinary collaboration, especially from a theoretical standpoint between computer science and psychology. Following a review of existing theories that attempt to explain continued technology use, we developed the Technology Integration Model (TIM). In sum, the main objective of TIM is to outline the processes behind continued technology use in an individual's everyday life. Here we present the model alongside a description of its scope and the relationships between constructs. This can help generate research questions relating to technology use while simultaneously addressing many previous short- comings of existing models. As a unifying theory, TIM can quickly be adopted by researchers and developers when designing and implementing new technologie