Precipitation frequency in Med-CORDEX and EURO-CORDEX ensembles from 0.44° to convection-permitting resolution: impact of model resolution and convection representation

Recent studies using convection-permitting (CP) climate simulations have demonstrated a step-change in the representation of heavy rainfall and rainfall characteristics (frequency-intensity) compared to coarser resolution Global and Regional climate models. The goal of this study is to better understand what explains the weaker frequency of precipitation in the CP ensemble by assessing the triggering process of precipitation in the different ensembles of regional climate simulations available over Europe. We focus on the statistical relationship between tropospheric temperature, humidity and precipitation to understand how the frequency of precipitation over Europe and the Mediterranean is impacted by model resolution and the representation of convection (parameterized vs. explicit). We employ a multi-model data-set with three different resolutions (0.44°, 0.11° and 0.0275°) produced in the context of the MED-CORDEX, EURO-CORDEX and the CORDEX Flagship Pilot Study "Convective Phenomena over Europe and the Mediterranean" (FPSCONV). The multi-variate approach is applied to all model ensembles, and to several surface stations where the integrated water vapor (IWV) is derived from Global Positioning System (GPS) measurements. The results show that all model ensembles capture the temperature dependence of the critical value of IWV (IWVcv), above which an increase in precipitation frequency occurs, but the differences between the models in terms of the value of IWVcv, and the probability of its being exceeded, can be large at higher temperatures. The lower frequency of precipitation in convection-permitting simulations is not only explained by higher temperatures but also by a higher IWVcv necessary to trigger precipitation at similar temperatures, and a lower probability to exceed this critical value. The spread between models in simulating IWVcv and the probability of exceeding IWVcv is reduced over land in the ensemble of models with explicit convection, especially at high temperatures, when the convective fraction of total precipitation becomes more important and the influence of the representation of entrainment in models thus becomes more important. Over lowlands, both model resolution and convection representation affect precipitation triggering while over mountainous areas, resolution has the highest impact due to orography-induced triggering processes. Over the sea, since lifting is produced by large-scale convergence, the probability to exceed IWVcv does not depend on temperature, and the model resolution does not have a clear impact on the results

The first multi-model ensemble of regional climate simulations at kilometer-scale resolution, part I: evaluation of precipitation

Here we present the first multi-model ensemble of regional climate simulations at kilometer-scale horizontal grid spacing over a decade long period. A total of 23 simulations run with a horizontal grid spacing of ∼3 km, driven by ERA-Interim reanalysis, and performed by 22 European research groups are analysed. Six different regional climate models (RCMs) are represented in the ensemble. The simulations are compared against available high-resolution precipitation observations and coarse resolution (∼ 12 km) RCMs with parameterized convection. The model simulations and observations are compared with respect to mean precipitation, precipitation intensity and frequency, and heavy precipitation on daily and hourly timescales in different seasons. The results show that kilometer-scale models produce a more realistic representation of precipitation than the coarse resolution RCMs. The most significant improvements are found for heavy precipitation and precipitation frequency on both daily and hourly time scales in the summer season. In general, kilometer-scale models tend to produce more intense precipitation and reduced wet-hour frequency compared to coarse resolution models. On average, the multi-model mean shows a reduction of bias from ∼ −40% at 12 km to ∼ −3% at 3 km for heavy hourly precipitation in summer. Furthermore, the uncertainty ranges i.e. the variability between the models for wet hour frequency is reduced by half with the use of kilometer-scale models. Although differences between the model simulations at the kilometer-scale and observations still exist, it is evident that these simulations are superior to the coarse-resolution RCM simulations in the representing precipitation in the present-day climate, and thus offer a promising way forward for investigations of climate and climate change at local to regional scales

The first multi-model ensemble of regional climate simulations at kilometer-scale resolution. Part I: Evaluation of precipitation

Here we present the first multi-model ensemble of regional climate simulations at kilometer-scale horizontal grid spacing over a decade long period. A total of 23 simulations run with a horizontal grid spacing of ∼ 3 km, driven by ERA-Interim reanalysis, and performed by 22 European research groups are analysed. Six different regional climate models (RCMs) are represented in the ensemble. The simulations are compared against available high-resolution precipitation observations and coarse resolution (∼ 12 km) RCMs with parameterized convection. The model simulations and observations are compared with respect to mean precipitation, precipitation intensity and frequency, and heavy precipitation on daily and hourly timescales in different seasons. The results show that kilometer-scale models produce a more realistic representation of precipitation than the coarse resolution RCMs. The most significant improvements are found for heavy precipitation and precipitation frequency on both daily and hourly time scales in the summer season. In general, kilometer-scale models tend to produce more intense precipitation and reduced wet-hour frequency compared to coarse resolution models. On average, the multi-model mean shows a reduction of bias from ∼ −40 at 12 km to ∼ −3 at 3 km for heavy hourly precipitation in summer. Furthermore, the uncertainty ranges i.e. the variability between the models for wet hour frequency is reduced by half with the use of kilometer-scale models. Although differences between the model simulations at the kilometer-scale and observations still exist, it is evident that these simulations are superior to the coarse-resolution RCM simulations in the representing precipitation in the present-day climate, and thus offer a promising way forward for investigations of climate and climate change at local to regional scales. © 2021, The Author(s)

Error characteristics of high resolution regional climate models over the Alpine area

This study describes typical error ranges of high resolution regional climate models operated over complex orography and investigates the scale-dependence of these error ranges. The results are valid primarily for the European Alpine region, but to some extent they can also be transferred to other orographically complex regions of the world. We investigate the model errors by evaluating a set of 62 one-year hindcast experiments for the year 1999 with four different regional climate models. The analysis is conducted for the parameters mean sea level pressure, air temperature (mean, minimum and maximum) and precipitation (mean, frequency and intensity), both as an area average over the whole modeled domain (the "Greater Alpine Region", GAR) and in six subregions. The subregional seasonal error ranges, defined as the interval between the 2.5th percentile and the 97.5th percentile, lie between -3.2 and +2.0 K for temperature and between -2.0 and +3.1 mm/day (-45.7 and +94.7%) for precipitation, respectively. While the temperature error ranges are hardly broadened at smaller scales, the precipitation error ranges increase by 28%. These results demonstrate that high resolution RCMs are applicable in relatively small scale climate impact studies with a comparable quality as on well investigated larger scales as far as temperature is concerned. For precipitation, which is a much more demanding parameter, the quality is moderately degraded on smaller scales

Precipitation in the EURO-CORDEX 0.11° and 0.44° simulations: high resolution, high benefits?

In the framework of the EURO-CORDEX initiative an ensemble of European-wide high-resolution regional climate simulations on a 0.11∘(∼12.5km) grid has been generated. This study investigates whether the fine-gridded regional climate models are found to add value to the simulated mean and extreme daily and sub-daily precipitation compared to their coarser-gridded 0.44∘(∼50km) counterparts. Therefore, pairs of fine- and coarse-gridded simulations of eight reanalysis-driven models are compared to fine-gridded observations in the Alps, Germany, Sweden, Norway, France, the Carpathians, and Spain. A clear result is that the 0.11∘ simulations are found to better reproduce mean and extreme precipitation for almost all regions and seasons, even on the scale of the coarser-gridded simulations (50 km). This is primarily caused by the improved representation of orography in the 0.11∘ simulations and therefore largest improvements can be found in regions with substantial orographic features. Improvements in reproducing precipitation in the summer season appear also due to the fact that in the fine-gridded simulations the larger scales of convection are captured by the resolved-scale dynamics . The 0.11∘ simulations reduce biases in large areas of the investigated regions, have an improved representation of spatial precipitation patterns, and precipitation distributions are improved for daily and in particular for 3 hourly precipitation sums in Switzerland. When the evaluation is conducted on the fine (12.5 km) grid, the added value of the 0.11∘ models becomes even more obvious

Precipitation frequency in Med-CORDEX and EURO-CORDEX ensembles from 0.44° to convection-permitting resolution: impact of model resolution and convection representation

International audienceRecent studies using convection-permitting (CP) climate simulations have demonstrated a step-change in the representation of heavy rainfall and rainfall characteristics (frequency-intensity) compared to coarser resolution Global and Regional climate models. The goal of this study is to better understand what explains the weaker frequency of precipitation in the CP ensemble by assessing the triggering process of precipitation in the different ensembles of regional climate simulations available over Europe. We focus on the statistical relationship between tropospheric temperature, humidity and precipitation to understand how the frequency of precipitation over Europe and the Mediterranean is impacted by model resolution and the representation of convection (parameterized vs. explicit). We employ a multi-model data-set with three different resolutions (0.44°, 0.11° and 0.0275°) produced in the context of the MED-CORDEX, EURO-CORDEX and the CORDEX Flagship Pilot Study "Convective Phenomena over Europe and the Mediterranean" (FPSCONV). The multi-variate approach is applied to all model ensembles, and to several surface stations where the integrated water vapor (IWV) is derived from Global Positioning System (GPS) measurements. The results show that all model ensembles capture the temperature dependence of the critical value of IWV (IWVcv), above which an increase in precipitation frequency occurs, but the differences between the models in terms of the value of IWVcv, and the probability of its being exceeded, can be large at higher temperatures. The lower frequency of precipitation in convection-permitting simulations is not only explained by higher temperatures but also by a higher IWVcv necessary to trigger precipitation at similar temperatures, and a lower probability to exceed this critical value. The spread between models in simulating IWVcv and the probability of exceeding IWVcv is reduced over land in the ensemble of models with explicit convection, especially at high temperatures, when the convective fraction of total precipitation becomes more important and the influence of the representation of entrainment in models thus becomes more important. Over lowlands, both model resolution and convection representation affect precipitation triggering while over mountainous areas, resolution has the highest impact due to orography-induced triggering processes. Over the sea, since lifting is produced by large-scale convergence, the probability to exceed IWVcv does not depend on temperature, and the model resolution does not have a clear impact on the results

Precipitation frequency in Med-CORDEX and EURO-CORDEX ensembles from 0.44° to convection-permitting resolution: impact of model resolution and convection representation

International audienceRecent studies using convection-permitting (CP) climate simulations have demonstrated a step-change in the representation of heavy rainfall and rainfall characteristics (frequency-intensity) compared to coarser resolution Global and Regional climate models. The goal of this study is to better understand what explains the weaker frequency of precipitation in the CP ensemble by assessing the triggering process of precipitation in the different ensembles of regional climate simulations available over Europe. We focus on the statistical relationship between tropospheric temperature, humidity and precipitation to understand how the frequency of precipitation over Europe and the Mediterranean is impacted by model resolution and the representation of convection (parameterized vs. explicit). We employ a multi-model data-set with three different resolutions (0.44°, 0.11° and 0.0275°) produced in the context of the MED-CORDEX, EURO-CORDEX and the CORDEX Flagship Pilot Study "Convective Phenomena over Europe and the Mediterranean" (FPSCONV). The multi-variate approach is applied to all model ensembles, and to several surface stations where the integrated water vapor (IWV) is derived from Global Positioning System (GPS) measurements. The results show that all model ensembles capture the temperature dependence of the critical value of IWV (IWVcv), above which an increase in precipitation frequency occurs, but the differences between the models in terms of the value of IWVcv, and the probability of its being exceeded, can be large at higher temperatures. The lower frequency of precipitation in convection-permitting simulations is not only explained by higher temperatures but also by a higher IWVcv necessary to trigger precipitation at similar temperatures, and a lower probability to exceed this critical value. The spread between models in simulating IWVcv and the probability of exceeding IWVcv is reduced over land in the ensemble of models with explicit convection, especially at high temperatures, when the convective fraction of total precipitation becomes more important and the influence of the representation of entrainment in models thus becomes more important. Over lowlands, both model resolution and convection representation affect precipitation triggering while over mountainous areas, resolution has the highest impact due to orography-induced triggering processes. Over the sea, since lifting is produced by large-scale convergence, the probability to exceed IWVcv does not depend on temperature, and the model resolution does not have a clear impact on the results

The added value of simulated near-surface wind speed over the Alps from a km-scale multimodel ensemble

International audienc

A first-of-its-kind multi-model convection permitting ensemble for investigating convective phenomena over Europe and the Mediterranean

A recently launched project under the auspices of the World Climate Research Program’s (WCRP) Coordinated Regional Downscaling Experiments Flagship Pilot Studies program (CORDEX-FPS) is presented. This initiative aims to build first-of-its-kind ensemble climate experiments of convection permitting models to investigate present and future convective processes and related extremes over Europe and the Mediterranean. In this manuscript the rationale, scientific aims and approaches are presented along with some preliminary results from the testing phase of the project. Three test cases were selected in order to obtain a first look at the ensemble performance. The test cases covered a summertime extreme precipitation event over Austria, a fall Foehn event over the Swiss Alps and an intensively documented fall event along the Mediterranean coast. The test cases were run in both “weather-like” (WL, initialized just before the event in question) and “climate” (CM, initialized 1 month before the event) modes. Ensembles of 18–21 members, representing six different modeling systems with different physics and modelling chain options, was generated for the test cases (27 modeling teams have committed to perform the longer climate simulations). Results indicate that, when run in WL mode, the ensemble captures all three events quite well with ensemble correlation skill scores of 0.67, 0.82 and 0.91. They suggest that the more the event is driven by large-scale conditions, the closer the agreement between the ensemble members. Even in climate mode the large-scale driven events over the Swiss Alps and the Mediterranean coasts are still captured (ensemble correlation skill scores of 0.90 and 0.62, respectively), but the inter-model spread increases as expected. In the case over Mediterranean the effects of local-scale interactions between flow and orography and land–ocean contrasts are readily apparent. However, there is a much larger, though not surprising, increase in the spread for the Austrian event, which was weakly forced by the large-scale flow. Though the ensemble correlation skill score is still quite high (0.80). The preliminary results illustrate both the promise and the challenges that convection permitting modeling faces and make a strong argument for an ensemble-based approach to investigating high impact convective processes