A simple method for the determination of the structure of ultrashort relativistic electron bunches

In this paper we propose a new method for measurements of the longitudinal profile of 100 femtosecond electron bunches for X-ray Free Electron Lasers (XFELs). The method is simply the combination of two well-known techniques, which where not previously combined to our knowledge. We use seed 10-ps 1047 nm quantum laser to produce exact optical replica of ultrafast electron bunches. The replica is generated in apparatus which consists of an input undulator (energy modulator), and the short output undulator (radiator) separated by a dispersion section. The radiation in the output undulator is excited by the electron bunch modulated at the optical wavelength and rapidly reaches 100 MW-level peak power. We then use the now-standard method of ultrashort laser pulse-shape measurement, a tandem combination of autocorrelator and spectrum (FROG -- frequency resolved optical gating). The FROG trace of the optical replica of electron bunch gives accurate and rapid electron bunch shape measurements in a way similar to a femtosecond oscilloscope. Real-time single-shot measurements of the electron bunch structure could provide significant information about physical mechanisms responsible for generation ultrashort electron bunches in bunch compressors. The big advantage of proposed technique is that it can be used to determine the slice energy spread and emittance in multishot measurements. It is possible to measure bunch structure completely, that is to measure peak current, energy spread and transverse emittance as a function of time. We illustrate with numerical examples the potential of the proposed method for electron beam diagnostics at the European X-ray FEL.Comment: 41 pages, 18 figure

Detection and correction of the misplacement error in THz Spectroscopy by application of singly subtractive Kramers-Kronig relations

In THz reflection spectroscopy the complex permittivity of an opaque medium is determined on the basis of the amplitude and of the phase of the reflected wave. There is usually a problem of phase error due to misplacement of the reference sample. Such experimental error brings inconsistency between phase and amplitude invoked by the causality principle. We propose a rigorous method to solve this relevant experimental problem by using an optimization method based upon singly subtractive Kramers-Kronig relations. The applicability of the method is demonstrated for measured data on an n-type undoped (100) InAs wafer in the spectral range from 0.5 up to 2.5 THz.Comment: 16 pages, 5 figure

Degradation of MinD Oscillator Complexes by Escherichia coli ClpXP

MinD is a cell division ATPase in Escherichia coli that os- cillates from pole to pole and regulates the spatial position of the cell division machinery. Together with MinC and MinE, the Min system restricts assembly of the FtsZ-ring to midcell, oscillating between the opposite ends of the cell and preventing FtsZ-ring misassembly at the poles. Here, we show that the ATP-dependent bacterial proteasome complex ClpXP degrades MinD in reconstituted degradation reactions in vitro and in vivo through direct recognition of the MinD N-terminal region. MinD degradation is enhanced during stationary phase, suggesting that ClpXP regulates levels of MinD in cells that are not actively dividing. ClpXP is a major regulator of growth phase–dependent proteins, and these results suggest that MinD levels are also controlled during stationary phase. In vitro, MinC and MinD are known to coassemble into linear polymers; therefore, we monitored copolymers assembled in vitro after incubation with ClpXP and observed that ClpXP promotes rapid MinCD copolymer destabilization and direct MinD degradation by ClpXP. The N terminus of MinD, including residue Arg 3, which is near the ATP-binding site in sequence, is critical for degradation by ClpXP. Together, these results demonstrate that ClpXP degradation modifies conformational assemblies of MinD in vitro and depresses Min function in vivo during periods of reduced proliferation

Retrospective Molecular Survey on Bacterial and Protozoan Abortive Agents in Roe Deer (Capreolus capreolus) from Central Italy

Bacterial and protozoan agents can determine abortion and other reproductive disorders in domestic ruminants, but data regarding their occurrence in wild ruminants are scanty worldwide, including in Italy. The aim of this retrospective study was to verify the occurrence of the main bacterial and protozoan abortive agents in 72 spleen samples previously collected from roe deer (Capreolus capreolus) living in mountain areas of Central Italy. All samples were collected and submitted to DNA extraction for other investigations. Molecular analyses were carried out on the DNA samples to detect Brucella spp., Chlamydia abortus, Coxiella burnetii, Salmonella enterica, Listeria monocytogenes, Neospora caninum, and Toxoplasma gondii. Three (4.16%) roe deer resulted PCR positive for C. burnetii and one (1.38%) for T. gondii. These findings suggest that roe deer living in the investigated areas do not act as important reservoirs of the searched agents. However, the tested animals lived in a closed area without contact with domestic animals that are usually involved in the epidemiology of the investigated pathogens. Monitoring of wild ruminants is pivotal to verify changes in the epidemiological scenario from a One Health perspective, too

Experimental investigation of the impact of optical injection on vital parameters of a gain-switched pulse source

An analysis of optical injection on a gain-switched distributed feedback (DFB) laser and its impact on pulse parameters that influence the performance of the pulse source in high-speed optical communication systems is presented in this paper. A range of 10 GHz in detuning and 5 dB in injected power has been experimentally identified to attain pulses, from an optically injected gain-switched DFB laser, with durations below 10 ps and pedestal suppression higher than 35 dB. These pulse features are associated with a side mode suppression ratio of about 30 dB and a timing jitter of less than 1 ps. This demonstrates the feasibility of using optical injection in conjunction with appropriate pulse compression schemes for developing an optimized and cost-efficient pulse source, based on a gain-switched DFB laser, for high-speed photonic systems

Effect of Noise on Frequency-Resolved Optical Gating Measurements of Ultrashort Pulses

We study the effects of noise in Frequency-Resolved Optical Gating measurements of ultrashort pulses. We quantify the measurement accuracy in the presence of additive, muliplicative, and quantization noise, and discuss filtering and pre-processing of the data

An optically driven quantum dot quantum computer

We propose a quantum computer structure based on coupled asymmetric single-electron quantum dots. Adjacent dots are strongly coupled by means of electric dipole-dipole interactions enabling rapid computation rates. Further, the asymmetric structures can be tailored for a long coherence time. The result maximizes the number of computation cycles prior to loss of coherence.Comment: 4 figure

Complete characterization of weak, ultrashort near-UV pulses by spectral interferometry

We present a method for a complete characterization of a femtosecond ultraviolet pulse when a fundamental near-infrared beam is also available. Our approach relies on generation of second harmonic from the pre-characterized fundamental, which serves as a reference against which an unknown pulse is measured using spectral interference (SI). The characterization apparatus is a modified second harmonic frequency resolved optical gating setup which additionally allows for taking SI spectrum. The presented method is linear in the unknown field, simple and sensitive. We checked its accuracy using test pulses generated in a thick nonlinear crystal, demonstrating the ability to measure the phase in a broad spectral range, down to 0.1% peak spectral intensity as well as retrieving pi leaps in the spectral phase

Generation of phase-controlled ultraviolet pulses and characterization by a simple autocorrelator setup

A versatile femtosecond ultraviolet (UV) pulse generation, a phase modulation, and a characterization setup for coherent control applications are demonstrated. For high-performance phase control of ultrashort pulses direct in the UV a microelectromechanical-system-based 2D mirror array is applied. Multiple examples for successful phase control of ultrashort UV pulses are given, such as arbitrarily phase tailoring and pulse recompression in open and closed loop schemes. For simple and effective characterization of the generated pulses, a UV autocorrelator based on two-photon absorption in a solar blind photomultiplier is constructed. The effects of space-time coupling on split mirror autocorrelation measurements are addressed and minimized. © 2009 Optical Society of America

Experimental generation of Riemann waves in optics: a route to shock wave control

We report the first observation of Riemann (simple) waves, which play a crucial role for understanding the dynamics of any shock-bearing system. This was achieved by properly tailoring the phase of an ultrashort light pulse injected into a highly nonlinear fiber. Optical Riemann waves are found to evolve in excellent quantitative agreement with the remarkably simple inviscid Burgers equation, whose applicability in physical systems is often challenged by viscous or dissipative effects. Our method allows us to further demonstrate a viable novel route to efficiently control the shock formation by the proper shaping of a laser pulse phase. Our results pave the way towards the experimental study, in a convenient benchtop setup, of complex physical phenomena otherwise difficult to access