Optical pulse generation at frequencies up to 20 GHz using external-injection seeding of a gain-switched commercial Fabry-Pérot laser

We demonstrate that by using strong external-injection seeding of gain-switched Fabry-Perot (FP) lasers, it is possible to generate optical pulses at repetition rates far in excess of the laser bandwidth. Experimental results illustrate the generation of optical pulses at frequencies up to 20 GHz from a FP laser with a 3-dB bandwidth of only 8 GHz. The optical pulses generated have a duration around 12 ps, and a spectral width of 40 GHz

Effects of intermodulation distortion on the performance of a hybrid radio/fiber system employing a self-pulsating laser diode transmitter

A self-pulsating laser is used to generate a multicarrier (five radio frequency (RF) channels) microwave optical signal for use in a hybrid radio/fiber system. The self-pulsation is achieved by external light injection into the laser diode. By varying the RF channel spacing, we have been able to estimate the degradation in system performance due to intermodulation distortion (caused by the nonlinear dynamic response of the laser). The power penalty on the central RF channel is found to be 3.2 dB for operation at the RF band around the laser self-pulsation frequency of 18.5 GHz. We have also characterized the performance of the multicarrier hybrid radio/fiber system in the frequency band corresponding to the inherent relaxation frequency of the laser

Improved performance of a hybrid radio/fiber system using a directly modulated laser transmitter with external injection

A directly modulated laser diode with external light injection is used to generate microwave optical signals for a hybrid radio/fiber system. The external light injection greatly enhances the frequency response of the laser, and thus, significantly improves the overall performance of the hybrid system. Experimental results show a 14-dB improvement in system performance for the externally injected laser in a hybrid radio/fiber communication link used for distributing 155-Mb/s data signal

Multiple RF carrier distribution in a hybrid radio/fiber system employing a self-pulsating laser diode transmitter

A self-pulsating laser diode is used to generate a multicarrier microwave optical signal for use in a hybrid radio/fiber system. The self-pulsation frequency of the laser is controlled by external light injection, and can be varied between 14-24 GHz. The hybrid radio/fiber system, employing the self-pulsation laser, is used to distribute two 155-Mb/s data signals on two radio frequency (RF) carriers (at 18.5 and 18.9 GHz). Experimental results show the overall system performance for both RF channels, and demonstrate that the performance is improved by around 17 dB compared with the case when the laser is used without external injection, and thus, does not self-pulsat

Development of highly flexible broadband networks incorporating wavelength division multiplexing and sub-carrier division multiplexing in a hybrid radio/fiber distribution system

A radio over fiber distribution system incorporating both SCM and WDM technologies is presented. The SCM signal contains five 155 Mbit/s data channels, centered around 18.5 GHz with 450 MHz spacing. This signal is directly modulated onto three high-speed lasers with emission frequencies spaced by 50 GHz. Bragg filters are employed at the receiver base station in order both to demultiplex the required optical channel, and to ensure that the detected signal is single side band (in order to overcome dispersion limitations on the link). Our results show negligible degradation in system performance for the demultiplexing of the WDM signal compared with the back-to-back performance curves

Multifunctional operation of a fiber Bragg grating in a WDM/SCM radio over fiber distribution system

A radio over fiber distribution system incorporating both sub-carrier multiplexing (SCM) and wavelength division multiplexing (WDM) technologies is presented. The SCM signal contains five 155-Mbit/s data channels, centered around 18.5 GHz with 450 MHz spacing. This signal is directly modulated onto three high-speed lasers with emission frequencies spaced by 50 GHz. Bragg filters are employed at the receiver base-station in order to both demultiplex the required optical channel and ensure that the detected signal is single sideband (in order to overcome dispersion limitations on the link). Our results show negligible degradation in system performance for the demultiplexing of the WDM signal compared with the back-to-back performance curves

Generation of optical microwave signals using laser diodes with enhanced modulation response for hybrid radio/fiber systems

The authors present the idea of using a laser with improved modulation bandwidth to generate microwave optical signals for hybrid radio/fibre systems. External light injection has been used to enhance the frequency response of the laser and thus greatly improve the overall performance of the hybrid system. Experimental results show an 8 dB improvement in system performance for the externally injected laser in a hybrid radio/fibre system used for distributing 155 Mbit/s data signals on an 18 GHz carrie

Generation of wavelength tunable optical pulses with SMSR exceeding 50 dB by self-seeding a gain-switched source containing two FP lasers

In this letter, we show the generation of shorter pulses (∼20 ps) that exhibit side mode suppression ratios (SMSR's) greater than 50 dB and wider tuning range (48.91 nm). Our technique is based on the self-seeding of a gain-switched source containing two FP lasers

UWB system based on gain-switched laser

Simulation results based on an UltraWideBand (UWB) system employing a gain-switched laser are presented. 156 Mb/s data stream modulates the position of short electrical pulses, which are then used to gain-switch the laser. The output optical pulses are then transmitted over fiber to a Remote Antenna Unit (RAU), where the signal is detected and undergoes spectral shaping (according to UWB requirements). The resulting Pulse Position Modulated (PPM) electrical impulses are then converted to an amplitude-modulated signal and down-converted. Bit Error Rate measurements are carried out on a back-to-back system and a transmission link (over different lengths of fiber

Frequency drift characterisation of directly modulated SGDBR tunable lasers

Tunable Lasers (TL) are rapidly becoming key components in Dense Wavelength Division Multiplexed (DWDM) systems, packet switched schemes and access networks. They are being introduced as alternatives to fixed wavelength sources to provide a greater degree of flexibility and to reduce large inventory [1]. The SGDBR laser is an ideal candidate due to its large tuning range (40 nm), high output power (10 dBm), large Side Mode Suppression Ratio (>30 dB) and its ability to be monolithically integrated with other semiconductor devices. Such integration could comprise of a Semiconductor Optical Amplifier (SOA), allowing for extended reach tunable operation, in a very compact and low cost footprint [2]. Thus far, external modulation has been the most popular modulation technique used with TLs. However, the addition of the modulator introduces loss to the transmitted signal due to high insertion and coupling losses. Addressing these short comings would result in increased cost and complexity of the transmitter. Alternatively, direct modulation is one of the simplest and cost efficient ways to modulate the lightwave signal. Hence, it is rational to investigate the performance of a directly modulated SGDBR laser in order to verify its usefulness in a WDM based access network scenario. Previous work in this area has mainly focused on bandwidth characterisation and transmission experiments [3, 4]. In this paper, we characterise the frequency drift associated with a directly modulated SGDBR laser incorporating a wavelength locker. Focus is placed on investigating the magnitude and settling time of this drift. In addition, we also demonstrate how the frequency drift has a detrimental effect on DWDM system performance when the modulated channel is passed through a narrow Optical Band-Pass Filter (OBPF) centred at the target emission frequency