1,557 research outputs found
Evolution of microstructure, texture and grain boundary character distribution of potassium doped tungsten fibers annealed at variable temperatures
The effect of the annealing temperature on the microstructure and grain boundary character distribution of potassium doped tungsten fibers made of drawn wire was investigated by Electron Backscatter Diffraction. Samples, with a diameter of 148.7 μm, in the as-received condition and annealed at 1300, 1600, 1900, 2100 and 2300 °C were analyzed at the center of the transversal sections. Up to 1900 °C, a uniform microstructural coarsening and primary recrystallization followed by normal grain growth was observed. Between 1900 and 2100 °C abnormal grain growth took place. The strong texture (<110> parallel to the drawing axis) remained present in all conditions. With increasing the annealing temperature, the low angle grain boundary fraction increased at the expense of high angle grain boundaries while the amount of coincidence site lattice boundaries reached its maximum at 1600 °C. At this temperature, the most resistant configuration of triple junctions against intergranular crack propagation was obtained
Microstructural modifications in tungsten induced by high flux plasma exposure : TEM examination
We have performed microstructural characterization using transmission electron microscopy (TEM) techniques to reveal nanometric features in the sub-surface region of tungsten samples exposed to high flux, low energy deuterium plasma. TEM examination revealed formation of a dense dislocation network and dislocation tangles, overall resulting in a strong increase in the dislocation density by at least one order of magnitude as compared to the initial one. Plasma-induced dislocation microstructure vanishes beyond a depth of about 10 mu m from the top of the exposed surface where the dislocation density and its morphology becomes comparable to the reference microstructure. Interstitial edge dislocation loops with Burgers vector a(0)/2 and a(0) were regularly observed within 6 mu m of the sub-surface region of the exposed samples, but absent in the reference material. The presence of these loops points to a co-existence of nanometric D bubbles, growing by loop punching mechanism, and sub-micron deuterium flakes, resulting in the formation of surface blisters, also observed here by scanning electron microscopy
Практико-ориентированная направленность подготовки студентов стоматологического факультета
МЕДИЦИНСКИЕ УЧЕБНЫЕ ЗАВЕДЕНИЯОБРАЗОВАНИЕ МЕДИЦИНСКОЕСТУДЕНТЫ МЕДИЦИНСКИХ УЧЕБНЫХ ЗАВЕДЕНИЙОБРАЗОВАНИЕ СТОМАТОЛОГИЧЕСКОЕПРАКТИКО-ОРИЕНТИРОВАННОЕ ОБРАЗОВАНИ
Object Kinetic Monte Carlo calculations of irradiated Fe-Cr dilute alloys: The effect of the interaction radius between substitutional Cr and self-interstitial Fe
ObjectKineticMonteCarlo models allow for the study of the evolution of the damage created by irradiation to time scales that are comparable to those achieved experimentally. Therefore, the essential ObjectKineticMonteCarlo parameters can be validated through comparison with experiments. However, this validation is not trivial since a large number of parameters is necessary, including migration energies of point defects and their clusters, binding energies of point defects in clusters, as well as the interactionradii. This is particularly cumbersome when describing an alloy, such as the Fe–Cr system, which is of interest for fusion energy applications. In this work we describe an ObjectKineticMonteCarlo model for Fe–Cr alloys in the dilute limit. The parameters used in the model come either from density functional theory calculations or from empirical interatomic potentials. This model is used to reproduce isochronal resistivity recovery experiments of electron irradiateddiluteFe–Cr alloys performed by Abe and Kuramoto. The comparison between the calculated results and the experiments reveal that an important parameter is the capture radius between substitutionalCr and self-interstitialFe atoms. A parametric study is presented on the effect of the capture radius on the simulated recovery curves
Iron chromium potential to model high-chromium ferritic alloys
We present an FeCr interatomic potential to model high-Cr ferritic alloys.The potential is fitted to thermodynamic and point-defect propertiesobtained from density functional theory (DFT) calculations and experi-ments. The developed potential is also benchmarked against otherpotentials available in literature. It shows particularly good agreementwith the DFT obtained mixing enthalpy of the random alloy, the formationenergy of intermetallics and experimental excess vibrational entropy andphase diagram. In addition, DFT calculated point-defect properties,both interstitial and substitutional, are well reproduced, as is the screwdislocation core structure. As a first validation of the potential, we studythe precipitation hardening of FeCr alloys via static simulations of theinteraction between Cr precipitates and screw dislocations. It is concludedthat the description of the dislocation core modification near a precipitatemight have a significant influence on the interaction mechanisms observedin dynamic simulations.Fil: Bonny, G.. No especifíca;Fil: Pasianot, Roberto Cesar. Universidad Nacional de San Martín. Instituto Sabato; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Comisión Nacional de Energía Atómica; ArgentinaFil: Terentyev, D.. No especifíca;Fil: Malerba, L.. No especifíca
Fracture surfaces of tungsten wires used in fiber-reinforced plasma facing components: Effect of potassium doping and high temperature annealing
Effects of cascade-induced dislocation structures on the long-term microstructural evolution in tungsten
In recent years, a number of systematic investigations of high-energy collision cascades in tungsten employing advanced defect analysis tools have shown that interstitial clusters can form complex non-planar dislocation structures. These structures are sessile in nature and may potentially have a strong impact on the long-term evolution of the radiation microstructure. To clarify this aspect, we selected several representative primary damage states of cascades debris and performed annealing simulations using molecular dynamics (MD). We found that immobile complexes of non-planar dislocation structures (CDS) evolve into glissile and planar shaped 1/2 loops with an activation energy of similar to 1.5 eV. The CDS objects were implemented in an object kinetic Monte Carlo (OKMC) model accounting for the event of transformation into 1-D migrating loops, following the MD data. OKMC was then used to investigate the impact of the transformation event (and the associated activation energy) on the evolution of the microstructure.Peer reviewe
- …