Changes in rod and frame test scores recorded in schoolchildren during development--a longitudinal study.

The Rod and Frame Test has been used to assess the degree to which subjects rely on the visual frame of reference to perceive vertical (visual field dependence-independence perceptual style). Early investigations found children exhibited a wide range of alignment errors, which reduced as they matured. These studies used a mechanical Rod and Frame system, and presented only mean values of grouped data. The current study also considered changes in individual performance. Changes in rod alignment accuracy in 419 school children were measured using a computer-based Rod and Frame test. Each child was tested at school Grade 2 and retested in Grades 4 and 6. The results confirmed that children displayed a wide range of alignment errors, which decreased with age but did not reach the expected adult values. Although most children showed a decrease in frame dependency over the 4 years of the study, almost 20% had increased alignment errors suggesting that they were becoming more frame-dependent. Plots of individual variation (SD) against mean error allowed the sample to be divided into 4 groups; the majority with small errors and SDs; a group with small SDs, but alignments clustering around the frame angle of 18°; a group showing large errors in the opposite direction to the frame tilt; and a small number with large SDs whose alignment appeared to be random. The errors in the last 3 groups could largely be explained by alignment of the rod to different aspects of the frame. At corresponding ages females exhibited larger alignment errors than males although this did not reach statistical significance. This study confirms that children rely more heavily on the visual frame of reference for processing spatial orientation cues. Most become less frame-dependent as they mature, but there are considerable individual differences

Infección por Theileria annae en un perro esplenectomizado

La babesiosis canina es una enfermedad infecciosa de distribución mundial debida a la proliferación en los hematíes del perro de unas babesias específicas transmitidas por garrapatas. Si bien ha sido tradicionalmente asumido que las únicas especies que causan enfermedad en la especie canina son Babesia canis y Babesia gibsoni, publicaciones recientes demuestran que una tercera especie (Theileria annae) también puede causar una enfermedad muy severa. Este trabajo presenta el segundo caso publicado de esta forma de Theileria annae en un perro de 14 años, de raza Basset Hound, esplenectomizado cinco meses antes, que se presentó en la clínica veterinaria con signos de hipertermia, hemoglobinuria, temblores y apatía. El estudio de laboratorio constató una acusada anemia hemolítica regenerativa y una intensa trombocitopenia como datos más característicos. En la extensión de sangre periférica se visualizaron múltiples merozoítos intra (22%) y extraeritrocitarios de pequeño tamaño (1-2 micras), forma anular y presentación única en la mayoría de hematíes. La prontitud del diagnóstico y del tratamiento específico con dipropionato de imidocarb hizo que el cuadro clínico evolucionase con rapidez hacia la curación, en contra de lo que es habitual en los animales esplenectomizados.

3D printing of medicines: Engineering novel oral devices with unique design and drug release characteristics

YesThree dimensional printing (3DP) was used to engineer novel oral drug delivery devices, with specialised design configurations loaded with multiple actives, with applications in personalised medicine. A filament extruder was used to obtain drug-loaded - paracetamol (acetaminophen) or caffeine - filaments of polyvinyl alcohol with characteristics suitable for use in fused-deposition modelling 3D printing. A multi-nozzle 3D printer enabled fabrication of capsule-shaped solid devices, containing paracetamol and caffeine, with different internal structures. The design configurations included a multilayer device, with each layer containing drug, whose identity was different from the drug in the adjacent layers; and a two-compartment device comprising a caplet embedded within a larger caplet (DuoCaplet), with each compartment containing a different drug. Raman spectroscopy was used to collect 2-dimensional hyper spectral arrays across the entire surface of the devices. Processing of the arrays using direct classical least squares component matching to produce false colour representations of distribution of the drugs showed clearly the areas that contain paracetamol and caffeine, and that there is a definitive separation between the drug layers. Drug release tests in biorelevant media showed unique drug release profiles dependent on the macrostructure of the devices. In the case of the multilayer devices, release of both drugs was simultaneous and independent of drug solubility. With the DuoCaplet design it was possible to engineer either rapid drug release or delayed release by selecting the site of incorporation of the drug in the device, and the lag-time for release from the internal compartment was dependent on the characteristics of the external layer. The study confirms the potential of 3D printing to fabricate multiple-drug containing devices with specialized design configurations and unique drug release characteristics, which would not otherwise be possible using conventional manufacturing methods.The full-text of this article will be released for public view at the end of the publisher embargo on 10 Oct 2016

Use of variability in national and regional data to estimate the prevalence of lymphangioleiomyomatosis

Background: Understanding the true prevalence of lymphangioleiomyomatosis (LAM) is important in estimating disease burden and targeting specific interventions. As with all rare diseases, obtaining reliable epidemiological data is difficult and requires innovative approaches. Aim: To determine the prevalence and incidence of LAM using data from patient organizations in seven countries, and to use the extent to which the prevalence of LAM varies regionally and nationally to determine whether prevalence estimates are related to health-care provision. Methods: Numbers of women with LAM were obtained from patient groups and national databases from seven countries (n = 1001). Prevalence was calculated for regions within countries using female population figures from census data. Incidence estimates were calculated for the USA, UK and Switzerland. Regional variation in prevalence and changes in incidence over time were analysed using Poisson regression and linear regression. Results: Prevalence of LAM in the seven countries ranged from 3.4 to 7.8/million women with significant variation, both between countries and between states in the USA. This variation did not relate to the number of pulmonary specialists in the region nor the percentage of population with health insurance, but suggests a large number of patients remain undiagnosed. The incidence of LAM from 2004 to 2008 ranged from 0.23 to 0.31/million women/per year in the USA, UK and Switzerland. Conclusions: Using this method, we have found that the prevalence of LAM is higher than that previously recorded and that many patients with LAM are undiagnose

Spatial structure of the 8200 cal yr BP event in northern Europe

International audienceA synthesis of well-dated high-resolution pollen records suggests a spatial structure in the 8200 cal yr BP event in northern Europe. The temperate, thermophilous tree taxa, especially Corylus, Ulmus, and Alnus, decline abruptly between 8300 and 8000 cal yr BP at most sites located south of 61° N, whereas there is no clear change in pollen values at the sites located in the North-European tree-line region. Pollen-based quantitative temperature reconstructions and several other, independent palaeoclimate proxies, such as lacustrine oxygen-isotope records, reflect the same pattern, with no detectable cooling in the sub-arctic region. The observed patterns challenges the general view of the wide-spread occurrence of the 8200 cal yr BP event in the North Atlantic region. An alternative explanation is that the cooling during the 8200 cal yr BP event took place mostly during the winter and spring, and the ecosystems in the south responded sensitively to the cooling during the onset of the growing season. In contrast, in the sub-arctic area, where the vegetation was still dormant and lakes ice-covered, the cold event is not reflected in pollen-based or lake-sediment-based records

Aquatic community response to volcanic eruptions on the Ecuadorian Andean flank: evidence from the palaeoecological record

Aquatic ecosystems in the tropical Andes are under increasing pressure from human modification of the landscape (deforestation and dams) and climatic change (increase of extreme events and 1.5 °C on average temperatures are projected for AD 2100). However, the resilience of these ecosystems to perturbations is poorly understood. Here we use a multi-proxy palaeoecological approach to assess the response of aquatic ecosystems to a major mechanism for natural disturbance, volcanic ash deposition. Specifically, we present data from two Neotropical lakes located on the eastern Andean flank of Ecuador. Laguna Pindo (1°27.132′S–78°04.847′W) is a tectonically formed closed basin surrounded by a dense mid-elevation forest, whereas Laguna Baños (0°19.328′S–78°09.175′W) is a glacially formed lake with an inflow and outflow in high Andean Páramo grasslands. In each lake we examined the dynamics of chironomids and other aquatic and semi-aquatic organisms to explore the effect of thick (> 5 cm) volcanic deposits on the aquatic communities in these two systems with different catchment features. In both lakes past volcanic ash deposition was evident from four large tephras dated to c.850 cal year BP (Pindo), and 4600, 3600 and 1500 cal year BP (Baños). Examination of the chironomid and aquatic assemblages before and after the ash depositions revealed no shift in composition at Pindo, but a major change at Baños occurred after the last event around 1500 cal year BP. Chironomids at Baños changed from an assemblage dominated by Pseudochironomus and Polypedilum nubifer-type to Cricotopus/Paratrichocladius type-II, and such a dominance lasted for approximately 380 years. We suggest that, despite potential changes in the water chemistry, the major effect on the chironomid community resulted from the thickness of the tephra being deposited, which acted to shallow the water body beyond a depth threshold. Changes in the aquatic flora and fauna at the base of the trophic chain can promote cascade effects that may deteriorate the ecosystem, especially when already influenced by human activities, such as deforestation and dams, which is frequent in the high Andes

Designing magnetic properties in CrSBr through hydrostatic pressure and ligand substitution

The ability to control magnetic properties of materials is crucial for fundamental research and underpins many information technologies. In this context, two-dimensional materials are a particularly exciting platform due to their high degree of tunability and ease of implementation into nanoscale devices. Here we report two approaches for manipulating the A-type antiferromagnetic properties of the layered semiconductor CrSBr through hydrostatic pressure and ligand substitution. Hydrostatic pressure compresses the unit cell, increasing the interlayer exchange energy while lowering the N\'eel temperature. Ligand substitution, realized synthetically through Cl alloying, anisotropically compresses the unit cell and suppresses the Cr-halogen covalency, reducing the magnetocrystalline anisotropy energy and decreasing the N\'eel temperature. A detailed structural analysis combined with first-principles calculations reveal that alterations in the magnetic properties are intricately related to changes in direct Cr-Cr exchange interactions and the Cr-anion superexchange pathways. Further, we demonstrate that Cl alloying enables chemical tuning of the interlayer coupling from antiferromagnetic to ferromagnetic, which is unique amongst known two-dimensional magnets. The magnetic tunability, combined with a high ordering temperature, chemical stability, and functional semiconducting properties, make CrSBr an ideal candidate for pre- and post-synthetic design of magnetism in two-dimensional materials.Comment: Main text: 17 pages, 4 figures. Supporting Information: 34 pages, 32 figures, 4 table

Gas Accretion and Galactic Chemical Evolution: Theory and Observations

This chapter reviews how galactic inflows influence galaxy metallicity. The goal is to discuss predictions from theoretical models, but particular emphasis is placed on the insights that result from using models to interpret observations. Even as the classical G-dwarf problem endures in the latest round of observational confirmation, a rich and tantalizing new phenomenology of relationships between $M_*$, $Z$, SFR, and gas fraction is emerging both in observations and in theoretical models. A consensus interpretation is emerging in which star-forming galaxies do most of their growing in a quiescent way that balances gas inflows and gas processing, and metal dilution with enrichment. Models that explicitly invoke this idea via equilibrium conditions can be used to infer inflow rates from observations, while models that do not assume equilibrium growth tend to recover it self-consistently. Mergers are an overall subdominant mechanism for delivering fresh gas to galaxies, but they trigger radial flows of previously-accreted gas that flatten radial gas-phase metallicity gradients and temporarily suppress central metallicities. Radial gradients are generically expected to be steep at early times and then flattened by mergers and enriched inflows of recycled gas at late times. However, further theoretical work is required in order to understand how to interpret observations. Likewise, more observational work is needed in order to understand how metallicity gradients evolve to high redshifts.Comment: Invited review to appear in Gas Accretion onto Galaxies, Astrophysics and Space Science Library, eds. A. J. Fox & R. Dav\'e, to be published by Springer. 29 pages, 2 figure