598 research outputs found
The digitalization of supply chain: A review
The emergence of new digital technologies as part of Industry 4.0 has enabled the supply chain to be managed more efficiently. We talk about digitalization of the supply chain and this trend refers to the evolution towards a smarter model that involves digital technologies such as Blockchain, IoT, Machine Learning, etc. These technologies actually increase and enhance the ability to optimize planning, sourcing and procurement strategies. Since this topic is of relevant interest for the scientific community, this paper aims to investigate the main discussion themes related to supply chain digitalization using a keyword-based organizing framework to identify, classify and investigate relevant intellectual contributions in this field. Results showed which are the main issues regarding supply chain digitalization as well as promising future research avenues
A bulk superconducting MgB2 cylinder for holding transversely polarized targets
An innovative solution is being pursued for the challenging magnetic problem of producing an internal transverse field around a polarized target, while shielding out an external longitudinal field from a detector. A hollow bulk superconductor can trap a transverse field that is present when cooled through its transition temperature, and also shield its interior from any subsequent field changes. A feasibility study with a prototype bulk MgB2 superconducting cylinder is described. Promising measurements taken of the interior field retention and exterior field exclusion, together with the corresponding long-term stability performance, are reported. In the context of an electron scattering experiment, such a solution minimizes beam deflection and the energy loss of reaction products, while also eliminating the heat load to the target cryostat from current leads that would be used with conventional electromagnets
The temperature and chronology of heavy-element synthesis in low-mass stars
Roughly half of the heavy elements (atomic mass greater than that of iron)
are believed to be synthesized in the late evolutionary stages of stars with
masses between 0.8 and 8 solar masses. Deep inside the star, nuclei (mainly
iron) capture neutrons and progressively build up (through the
slow-neutron-capture process, or s-process) heavier elements that are
subsequently brought to the stellar surface by convection. Two neutron sources,
activated at distinct temperatures, have been proposed: 13C and 22Ne, each
releasing one neutron per alpha-particle (4He) captured. To explain the
measured stellar abundances, stellar evolution models invoking the 13C neutron
source (which operates at temperatures of about one hundred million kelvin) are
favoured. Isotopic ratios in primitive meteorites, however, reflecting
nucleosynthesis in the previous generations of stars that contributed material
to the Solar System, point to higher temperatures (more than three hundred
million kelvin), requiring at least a late activation of 22Ne. Here we report a
determination of the s-process temperature directly in evolved low-mass giant
stars, using zirconium and niobium abundances, independently of stellar
evolution models. The derived temperature supports 13C as the s-process neutron
source. The radioactive pair 93Zr-93Nb used to estimate the s-process
temperature also provides, together with the pair 99Tc-99Ru, chronometric
information on the time elapsed since the start of the s-process, which we
determine to be one million to three million years.Comment: 30 pages, 10 figure
New measurement of neutron capture resonances of 209Bi
The neutron capture cross section of Bi209 has been measured at the CERN n
TOF facility by employing the pulse-height-weighting technique. Improvements
over previous measurements are mainly because of an optimized detection system,
which led to a practically negligible neutron sensitivity. Additional
experimental sources of systematic error, such as the electronic threshold in
the detectors, summing of gamma-rays, internal electron conversion, and the
isomeric state in bismuth, have been taken into account. Gamma-ray absorption
effects inside the sample have been corrected by employing a nonpolynomial
weighting function. Because Bi209 is the last stable isotope in the reaction
path of the stellar s-process, the Maxwellian averaged capture cross section is
important for the recycling of the reaction flow by alpha-decays. In the
relevant stellar range of thermal energies between kT=5 and 8 keV our new
capture rate is about 16% higher than the presently accepted value used for
nucleosynthesis calculations. At this low temperature an important part of the
heavy Pb-Bi isotopes are supposed to be synthesized by the s-process in the He
shells of low mass, thermally pulsing asymptotic giant branch stars. With the
improved set of cross sections we obtain an s-process fraction of 19(3)% of the
solar bismuth abundance, resulting in an r-process residual of 81(3)%. The
present (n,gamma) cross-section measurement is also of relevance for the design
of accelerator driven systems based on a liquid metal Pb/Bi spallation target.Comment: 10 pages, 5figures, recently published in Phys. Rev.
Optimization of the effective light attenuation length of YAP:Ce and LYSO:Ce crystals for a novel geometrical PET concept
Abstract The effective light attenuation length in thin bars of polished YAP:Ce and LYSO:Ce scintillators with lengths of the order of 10 cm has been studied for various wrappings and coatings of the crystal lateral surfaces. This physical parameter plays a key role in a novel 3D PET concept based on axial arrays of long scintillator bars read out at both ends by Hybrid Photodetectors (HPDs) since it influences the spatial, energy and time resolutions of such a device. In this paper we show that the effective light attenuation length of polished crystals can be reduced by wrapping their lateral surfaces with Teflon, or tuned to the desired value by depositing a coating of Cr or Au of well-defined thickness. The studies have been carried out with YAP and LYSO long scintillator bars, read out by standard photomultiplier tubes. Even if the novel PET device will use different scintillators and HPD readout, the results described here prove the feasibility of an important aspect of the concept and provide hints on the potential capabilities of the device
Toward polarized antiprotons: Machine development for spin-filtering experiments
The paper describes the commissioning of the experimental equipment and the
machine studies required for the first spin-filtering experiment with protons
at a beam kinetic energy of MeV in COSY. The implementation of a
low- insertion made it possible to achieve beam lifetimes of
s in the presence of a dense polarized hydrogen
storage-cell target of areal density . The developed techniques can be directly
applied to antiproton machines and allow for the determination of the
spin-dependent cross sections via spin filtering
Measurement of the neutron capture cross section of the s-only isotope 204Pb from 1 eV to 440 keV
The neutron capture cross section of 204Pb has been measured at the CERN
n_TOF installation with high resolution in the energy range from 1 eV to 440
keV. An R-matrix analysis of the resolved resonance region, between 1 eV and
100 keV, was carried out using the SAMMY code. In the interval between 100 keV
and 440 keV we report the average capture cross section. The background in the
entire neutron energy range could be reliably determined from the measurement
of a 208Pb sample. Other systematic effects in this measurement could be
investigated and precisely corrected by means of detailed Monte Carlo
simulations. We obtain a Maxwellian average capture cross section for 204Pb at
kT=30 keV of 79(3) mb, in agreement with previous experiments. However our
cross section at kT=5 keV is about 35% larger than the values reported so far.
The implications of the new cross section for the s-process abundance
contributions in the Pb/Bi region are discussed.Comment: 8 pages, 3 figures, article submitted to Phys. Rev.
Measurement of the (90,91,92,93,94,96)Zr(n,gamma) and (139)La(n,gamma) cross sections at n_TOF
Open AccessNeutron capture cross sections of Zr and La isotopes have important implications in the field of nuclear astrophysics as well as in the nuclear technology. In particular the Zr isotopes play a key role for the determination of the neutron density in the He burning zone of the Red Giant star, while the (139)La is important to monitor the s-process abundances from Ba up to Ph. Zr is also largely used as structural materials of traditional and advanced nuclear reactors. The nuclear resonance parameters and the cross section of (90,91,92,93,94,96)Zr and (139)La have been measured at the n_TOF facility at CERN. Based on these data the capture resonance strength and the Maxwellian-averaged cross section were calculated
Pulse shape analysis of signals from BaF2 and CeF3 scintillators for neutron capture experiments
The scope of this work is to study the characteristics of BaF2 and CeF3 signals using fast digitizers, which allow the sampling of the signal at very high frequencies and the application of the fitting method for analysis of the recorded pulses. By this procedure particle identification and the reconstruction of pile-up events can be improved, while maintaining the energy and time-of-flight resolution as compared to traditional methods. The reliability of the technique and problems connected with data acquisition are discussed with respect to accurate measurements of neutron capture cross-sections
Present Status and Future Programs of the n_TOF Experiment
This is an Open Access article distributed under the terms of the Creative Commons Attribution-Noncommercial License 3.0, which permits unrestricted use, distribution, and reproduction in any noncommercial medium, provided the original work is properly citedThe neutron time-of-flight facility n_TOF at CERN, Switzerland, operational since 2001, delivers neutrons using the Proton Synchrotron (PS) 20 GeV/c proton beam impinging on a lead spallation target. The facility combines a very high instantaneous neutron flux, an excellent time of flight resolution due to the distance between the experimental area and the production target (185 meters), a low intrinsic background and a wide range of neutron energies, from thermal to GeV neutrons. These characteristics provide a unique possibility to perform neutron-induced capture and fission cross-section measurements for applications in nuclear astrophysics and in nuclear reactor technology.The most relevant measurements performed up to now and foreseen for the future will be presented in this contribution. The overall efficiency of the experimental program and the range of possible measurements achievable with the construction of a second experimental area (EAR-2), vertically located 20 m on top of the n_TOF spallation target, might offer a substantial improvement in measurement sensitivities. A feasibility study of the possible realisation of the installation extension will be also presented
- …