Fibrin adhesive derived from snake venom in periodontal surgery: histologicalanalysis

BACKGROUND: A new fibrin adhesive made of buffalo plasma-derived fibrinogen and a thrombin-like snake venom enzyme, has been successfully used to immobilize free gingival grafts. This case series histologically compared sutured grafts (control group) with others immobilized by using the fibrin adhesive (experimental group). CASE DESCRIPTION: The grafts were placed in the contralateral mandibular bicuspids of 15 patients, so that each subject received one treatment of each type. Five biopsies of each group were collected at 7, 14 and 45 days of healing, which were histologically and morphometrically analyzed as regards the relative volume density of the different connective tissue components. RESULTS: The sites in the control group presented a higher inflammatory cell density at 7 days and a tendency towards a lower collagen density. In the experimental group, the grafts had an appearance of more advanced healing. Tissue maturity characteristics progressed until 14 and 45 days, but no difference between groups could be noted at these times. Conclusions: Within the limits of the present study, it may be suggested that the alternative fibrin adhesive tested could represent an alternative to sutures in gingival grafts procedures.(FAPESP) São Paulo Research Foundatio

The Cuesta de Rahue Basement Inlier (Southern Neuquén Precordillera, Argentina): A Devonian to Triassic polyphase orogenic record in northern Patagonia

New geological, structural, microstructural, and K-Ar biotite and illite geochronological data of igneous-metamorphic rocks exposed in the Cuesta de Rahue Basement Inlier are presented to reconstruct the Late Palaeozoic to Mesozoic tectonometamorphic and magmatic history of northwestern Patagonia. This block comprises a medium-grade metasedimentary sequence (Cuesta de Rahue Metamorphic Complex), Late Carboniferous granitoids and a low-grade metavolcano-sedimentary unit (Arroyo Coloco Metamorphic Complex). The Cuesta de Rahue Metamorphic Complex was deposited during the middle Palaeozoic and underwent Devonian low-pressure regional metamorphism, succeeded by the intrusion of granitoids at ca. 300 Ma. On the other hand, the Arroyo Coloco Metamorphic Complex record deformation and metamorphism at epizonal conditions (> 300 °C), constrained at ca. 232-199 Ma by K-Ar and XRD illite data. The Cuesta de Rahue Basement Inlier thus records a protracted orogenic evolution, recording Devonian metamorphism, Late Carboniferous-Permian Gondwanide tectonomagmatic processes, and Late Triassic deformation and metamorphism. Afterwards, this block was also affected by Mesozoic normal faulting and, finally, by Miocene-Pliocene Andean deformation. The latter was intimately related to reactivation of inherited basement fabrics, favouring a transpressional deformation regime.Fil: Oriolo, Sebastián. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Geociencias Básicas, Aplicadas y Ambientales de Buenos Aires. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Geociencias Básicas, Aplicadas y Ambientales de Buenos Aires; ArgentinaFil: González, Pablo D.. Servicio Geologico Minero Argentino. Delegacion General Roca.; ArgentinaFil: Alegre, Pablo. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Departamento de Ciencias Geológicas; ArgentinaFil: Wemmer, Klaus. Universität Göttingen; AlemaniaFil: Varela, Ricardo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata. Centro de Investigaciones Geológicas. Universidad Nacional de La Plata. Facultad de Ciencias Naturales y Museo. Centro de Investigaciones Geológicas; ArgentinaFil: Stipp Basei, Miguel Angelo. Universidade de Sao Paulo; Brasi

Homogeneous nucleation of colloidal melts under the influence of shearing fields

We study the effect of shear flow on homogeneous crystal nucleation, using Brownian Dynamics simulations in combination with an umbrella sampling like technique. The symmetry breaking due to shear results in anisotropic radial distribution functions. The homogeneous shear rate suppresses crystal nucleation and leads to an increase of the size of the critical nucleus. These observations can be described by a simple, phenomenological extension of classical nucleation theory. In addition, we find that nuclei have a preferential orientation with respect to the direction of shear. On average the longest dimension of a nucleus is along the vorticity direction, while the shortest dimension is preferably perpendicular to that and slightly tilted with respect to the gradient direction.Comment: 10 pages, 8 figures, Submitted to J. Phys.: Condens. Matte

Mechanistic insight into biopolymer induced iron oxide mineralization through quantification of molecular bonding

Microbial production of iron (oxyhydr)oxides on polysaccharide rich biopolymers occurs on such a vast scale that it impacts the global iron cycle and has been responsible for major biogeochemical events. Yet the physiochemical controls these biopolymers exert on iron (oxyhydr)oxide formation are poorly understood. Here we used dynamic force spectroscopy to directly probe binding between complex, model and natural microbial polysaccharides and common iron (oxyhydr)oxides. Applying nucleation theory to our results demonstrates that if there is a strong attractive interaction between biopolymers and iron (oxyhydr)oxides, the biopolymers decrease the nucleation barriers, thus promoting mineral nucleation. These results are also supported by nucleation studies and density functional theory. Spectroscopic and thermogravimetric data provide insight into the subsequent growth dynamics and show that the degree and strength of water association with the polymers can explain the influence on iron (oxyhydr)oxide transformation rates. Combined, our results provide a mechanistic basis for understanding how polymer-mineral-water interactions alter iron (oxyhydr)oxides nucleation and growth dynamics and pave the way for an improved understanding of the consequences of polymer induced mineralization in natural systems

Structure of nanoparticles embedded in micellar polycrystals

We investigate by scattering techniques the structure of water-based soft composite materials comprising a crystal made of Pluronic block-copolymer micelles arranged in a face-centered cubic lattice and a small amount (at most 2% by volume) of silica nanoparticles, of size comparable to that of the micelles. The copolymer is thermosensitive: it is hydrophilic and fully dissolved in water at low temperature (T ~ 0{\deg}C), and self-assembles into micelles at room temperature, where the block-copolymer is amphiphilic. We use contrast matching small-angle neuron scattering experiments to probe independently the structure of the nanoparticles and that of the polymer. We find that the nanoparticles do not perturb the crystalline order. In addition, a structure peak is measured for the silica nanoparticles dispersed in the polycrystalline samples. This implies that the samples are spatially heterogeneous and comprise, without macroscopic phase separation, silica-poor and silica-rich regions. We show that the nanoparticle concentration in the silica-rich regions is about tenfold the average concentration. These regions are grain boundaries between crystallites, where nanoparticles concentrate, as shown by static light scattering and by light microscopy imaging of the samples. We show that the temperature rate at which the sample is prepared strongly influence the segregation of the nanoparticles in the grain-boundaries.Comment: accepted for publication in Langmui

The Mesozoic along-strike tectono-metamorphic segmentation of Longmen Shan (eastern Tibetan plateau)

The Longmen Shan belt (eastern border of the Tibetan plateau) constitutes a tectonically active region as demonstrated by the occurrence of the unexpected 2008 Mw 7.9 Wenchuan and 2013 Mw 6.6 Lushan earthquakes in the central and southern parts of the belt respectively. These events revealed the necessity of a better understanding of the long‐term geological evolution of the belt and its effect on the present dynamics and crustal structure. New structural and thermobarometric data offer a comprehensive dataset of the paleo‐temperatures across the belt and P‐T estimates for low‐grade metamorphic domains. In the central Longmen Shan, two metamorphic jumps of 150‐200°C, 5‐6 kbar and ~50 °C, 3‐5 kbar acquired during the Early Mesozoic are observed across the Wenchuan and Beichuan faults respectively, attesting to their thrusting movement and unrevealing a major decollement between the allochtonous Songpan‐Garze metasedimentary cover (at T > 500°C) and the autochtonous units and the basement (T < 400°C). In the southern Longmen Shan, the only greenschist‐facies metamorphism is observed both in the basement (360 ± 30°C, 6 ± 2 kbar) and in the metasedimentary cover (350 ± 30°C, 3 ± 1 kbar). Peak conditions were reached at c. 80‐60 Ma in the basement and c. 55‐33 Ma in the cover, c. 50 Ma after the greenschist‐facies metamorphic overprint observed in the central Longmen Shan (c. 150‐120 Ma). This along‐strike metamorphic segmentation coincides well with the present fault segmentation and reveals that the central and southern Longmen Shan experienced different tectono‐metamorphic histories since the Mesozoic

Genetic transformation of Citrus sinensis with Citrus tristeza virus (CTV) derived sequences and reaction of transgenic lines to CTV infection

Transgenic Citrus sinensis (L.) Osb. plants, cvs. Valencia and Hamlin, expressing Citrus tristeza virus (CTV) derived sequences were obtained by genetic transformation. The gene constructs were pCTV-CP containing the 25 kDa major capsid protein gene (CTV-CP), pCTV-dsCP containing the same CTV-CP gene in an intron-spliced hairpin construct, and pCTV-CS containing a 559 nt conserved region of the CTV genome. The transgenic lines were identified by PCR and the transgene integration was confirmed by Southern blot. Transgene mRNA could be detected in most transgenic lines containing pCTV-CP or pCTV-CS transgene. The mRNA of pCTV-dsCP transgene was almost undetectable, with very light bands in most analyzed plants. The transgene transcription appears to be closely linked to the type of gene construct. The virus challenge assays reveals that all transgenic lines were infected. However, it was possible to identify propagated clones of transgenic plants of both cultivars studied with a low virus titer, with values similar to the non-inoculated plants (negative control). These results suggested that the transgenic plants present some level of resistance to virus replication. The higher number of clones with low virus titer and where mRNA could not be detected or was presented in a very light band was found for pCTV-dsCP-derived transgenic lines561162166CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICO - CNPQCOORDENAÇÃO DE APERFEIÇOAMENTO DE PESSOAL DE NÍVEL SUPERIOR - CAPESFUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULO - FAPESPsem informaçã

A subgrain‐size piezometer calibrated for EBSD

We calibrate a subgrain‐size piezometer using electron backscatter diffraction (EBSD) data collected from experimentally deformed samples of olivine and quartz. Systematic analyses of angular and spatial resolution test the suitability of each dataset for inclusion in calibration of the subgrain‐size piezometer. To identify subgrain boundaries, we consider a range of critical misorientation angles and conclude that a 1° threshold provides the optimal piezometric calibration. The mean line‐intercept length, equivalent to the subgrain‐size, is found to be inversely proportional to the von Mises equivalent stress for datasets both with and without the Holyoke and Kronenberg (2010) correction. These new piezometers provide stress estimates from EBSD analyses of polymineralic rocks without the need to discriminate between relict and recrystallised grains and therefore greatly increase the range of rocks that may be used to constrain geodynamic models