Comparison of History Effects in Magnetization in Weakly pinned Crystals of high-TcT_c and low-Tc_c Superconductors

A comparison of the history effects in weakly pinned single crystals of a high $T_c$ YBa$_2$Cu$_3$O$_{7 - \delta}$ (for H $\parallel$ c) and a low $T_c$ Ca$_3$Rh$_4$Sn$_{13}$, which show anomalous variations in critical current density $J_c(H)$ are presented via tracings of the minor magnetization hysteresis loops using a vibrating sample magnetometer. The sample histories focussed are, (i) the field cooled (FC), (ii) the zero field cooled (ZFC) and (iii) an isothermal reversal of field from the normal state. An understanding of the results in terms of the modulation in the plastic deformation of the elastic vortex solid and supercooling across order-disorder transition is sought.Comment: Presented in IWCC-200

Feasibility of magnetic bead technology for concentration of mycobacteria in sputum prior to fluorescence microscopy

<p>Abstract</p> <p>Background</p> <p>Direct sputum smear microscopy is the mainstay of TB diagnosis in most low and middle income countries, and is highly specific for <it>Mycobacterium tuberculosis </it>in such settings. However it is limited by low sensitivity, particularly in HIV co-infected patients. Concentration by centrifugation has been reported to be more sensitive than direct smear preparation, but is only suitable for referral laboratories. Simpler concentration methods that could be applied in peripheral laboratories are urgently needed.</p> <p>Methods</p> <p>We evaluated the feasibility of an early prototype ligand-coated magnetic bead technology to concentrate <it>M. tuberculosis </it>prior to detection by LED-based fluorescence microscopy compared with direct Ziehl-Neelsen microscopy and direct and concentrated fluorescence microscopy in a reference laboratory in Kampala, Uganda. Results were compared with MGIT 960 liquid culture and Lowenstein-Jensen culture.</p> <p>Results</p> <p>Compared to culture, concentrated FM had significantly higher sensitivity than direct ZN (74.8% and 51.4%), magnetic bead-FM (65.4%) and direct FM (58.9%). The sensitivity of magnetic bead FM was significantly higher than direct ZN (p < 0.001) but not significantly higher than direct FM (p = 0.210). The specificity of magnetic bead FM and concentrated FM was significantly lower than direct ZN (88.6%, 94.3% and 98.9% respectively) and direct FM (99.4%). There was no significant difference in specificity between magnetic bead FM and concentrated FM. Allowing for blinded resolution of discrepant results, the specificity of magnetic bead FM increased to 93.1%. Direct microscopy was simpler than concentrated FM and Magnetic bead FM which both had a similar number of steps.</p> <p>Conclusion</p> <p>The sensitivity of the early prototype magnetic bead FM was lower than concentrated FM, similar to direct FM, and significantly higher than direct ZN. Both magnetic bead and concentration by centrifugation led to reduced specificity compared with the direct smear methods. Some magnetic bead FM false positive results were not easily explained and should be further investigated. The prototype version of the magnetic bead procedure tested here was of similar complexity to concentration by centrifugation. As such, if the sensitivity of the magnetic bead FM could be improved in future versions of the technology, this may offer a viable alternative to centrifugation.</p

Current methods for development of rapid reviews about diagnostic tests: an international survey

Background Rapid reviews (RRs) have emerged as an efficient alternative to time-consuming systematic reviews—they can help meet the demand for accelerated evidence synthesis to inform decision-making in healthcare. The synthesis of diagnostic evidence has important methodological challenges. Here, we performed an international survey to identify the current practice of producing RRs for diagnostic tests. Methods We developed and administered an online survey inviting institutions that perform RRs of diagnostic tests from all over the world. Results All participants (N = 25) reported the implementation of one or more methods to define the scope of the RR; however, only one strategy (defining a structured question) was used by ≥90% of participants. All participants used at least one methodological shortcut including the use of a previous review as a starting point (92%) and the use of limits on the search (96%). Parallelization and automation of review tasks were not extensively used (48 and 20%, respectively). Conclusion Our survey indicates a greater use of shortcuts and limits for conducting diagnostic test RRs versus the results of a recent scoping review analyzing published RRs. Several shortcuts are used without knowing how their implementation affects the results of the evidence synthesis in the setting of diagnostic test reviews. Thus, a structured evaluation of the challenges and implications of the adoption of these RR methods is warranted

Tuberculosis diagnostics and biomarkers: needs, challenges, recent advances, and opportunities

Tuberculosis is unique among the major infectious diseases in that it lacks accurate rapid point-of-care diagnostic tests. Failure to control the spread of tuberculosis is largely due to our inability to detect and treat all infectious cases of pulmonary tuberculosis in a timely fashion, allowing continued Mycobacterium tuberculosis transmission within communities. Currently recommended gold-standard diagnostic tests for tuberculosis are laboratory based, and multiple investigations may be necessary over a period of weeks or months before a diagnosis is made. Several new diagnostic tests have recently become available for detecting active tuberculosis disease, screening for latent M. tuberculosis infection, and identifying drug-resistant strains of M. tuberculosis. However, progress toward a robust point-of-care test has been limited, and novel biomarker discovery remains challenging. In the absence of effective prevention strategies, high rates of early case detection and subsequent cure are required for global tuberculosis control. Early case detection is dependent on test accuracy, accessibility, cost, and complexity, but also depends on the political will and funder investment to deliver optimal, sustainable care to those worst affected by the tuberculosis and human immunodeficiency virus epidemics. This review highlights unanswered questions, challenges, recent advances, unresolved operational and technical issues, needs, and opportunities related to tuberculosis diagnostics

Performance of LED-Based Fluorescence Microscopy to Diagnose Tuberculosis in a Peripheral Health Centre in Nairobi.

Sputum microscopy is the only tuberculosis (TB) diagnostic available at peripheral levels of care in resource limited countries. Its sensitivity is low, particularly in high HIV prevalence settings. Fluorescence microscopy (FM) can improve performance of microscopy and with the new light emitting diode (LED) technologies could be appropriate for peripheral settings. The study aimed to compare the performance of LED-FM versus Ziehl-Neelsen (ZN) microscopy and to assess feasibility of LED-FM at a low level of care in a high HIV prevalence country

Comparison of LED and Conventional Fluorescence Microscopy for Detection of Acid Fast Bacilli in a Low-Incidence Setting

INTRODUCTION: Light emitting diode fluorescence microscopes have many practical advantages over conventional mercury vapour fluorescence microscopes, which would make them the preferred choice for laboratories in both low- and high-resource settings, provided performance is equivalent. METHODS: In a nested case-control study, we compared diagnostic accuracy and time required to read slides with the Zeiss PrimoStar iLED, LW Scientific Lumin, and a conventional fluorescence microscope (Leica DMLS). Mycobacterial culture was used as the reference standard, and subgroup analysis by specimen source and organism isolated were performed. RESULTS: There was no difference in sensitivity or specificity between the three microscopes, and agreement was high for all comparisons and subgroups. The Lumin and the conventional fluorescence microscope were equivalent with respect to time required to read smears, but the Zeiss iLED was significantly time saving compared to both. CONCLUSIONS: Light emitting diode microscopy should be considered by all tuberculosis diagnostic laboratories, including those in high income countries, as a replacement for conventional fluorescence microscopes. Our findings provide support to the recent World Health Organization policy recommending that conventional fluorescence microscopy be replaced by light emitting diode microscopy using auramine staining in all settings where fluorescence microscopy is currently used

Oxidized AlxGa1−xAs heterostructure planar waveguides

Waveguiding by total internal reflection is demonstrated within Al{sub x}Ga{sub 1{minus}x}As semiconductor heterostructures which have been fully oxidized in water vapor at {approximately}490 C. Refractive index, mode propagation constant, propagation loss ({le}3 cm{sup {minus}1}) at {lambda}=1.3 and 1.55 {micro}m, secondary ion mass spectrometry depth profile, and Fourier transform infrared transmission spectra measurements are presented to characterize a multimode single heterostructure oxide waveguide. An index contrast of {Delta}n=0.06 is observed between oxidized x=0.4 and x=0.8 Al{sub x}Ga{sub 1{minus}x}As oxide layers. Absorption loss at 1.55 {micro}m is observed due to OH groups. Near-field images are presented showing waveguiding in a single-mode oxide double heterostructure

British HIV Association guidelines for the management of tuberculosis in adults living with HIV 2019

The overall purpose of these guidelines is to help physicians manage adults with tuberculosis (TB)/human immunodeficiency virus (HIV) co‐infection. Recommendations for the treatment of TB in HIV‐positive adults are similar to those in HIV‐negative adults. Of note, the term “HIV” refers to HIV‐1 throughout these guidelines