Rapid evolution of aerosol particles and their optical properties downwind of wildfires in the western US

During the first phase of the Biomass Burn Operational Project (BBOP) field campaign, conducted in the Pacific Northwest, the DOE G-1 aircraft was used to follow the time evolution of wildfire smoke from near the point of emission to locations 2-3.5 h downwind. In nine flights we made repeated transects of wildfire plumes at varying downwind distances and could thereby follow the plume\u27s time evolution. On average there was little change in dilution-normalized aerosol mass concentration as a function of downwind distance. This consistency hides a dynamic system in which primary aerosol particles are evaporating and secondary ones condensing. Organic aerosol is oxidized as a result. On all transects more than 90 % of aerosol is organic. In freshly emitted smoke aerosol, NH+4 is approximately equivalent to NO3. After 2 h of daytime aging, NH+4 increased and is approximately equivalent to the sum of Cl, SO24, and NO3. Particle size increased with downwind distance, causing particles to be more efficient scatters. Averaged over nine flights, mass scattering efficiency (MSE) increased in ∼ 2 h by 56 % and doubled in one flight. Mechanisms for redistributing mass from small to large particles are discussed. Coagulation is effective at moving aerosol from the Aitken to accumulation modes but yields only a minor increase in MSE. As absorption remained nearly constant with age, the time evolution of single scatter albedo was controlled by age-dependent scattering. Near-fire aerosol had a single scatter albedo (SSA) of 0.8-0.9. After 1 to 2 h of aging SSAs were typically 0.9 and greater. Assuming global-average surface and atmospheric conditions, the observed age dependence in SSA would change the direct radiative effect of a wildfire plume from near zero near the fire to a cooling effect downwind

Isoprene photochemistry over the Amazon rainforest

Isoprene photooxidation is a major driver of atmospheric chemistry over forested regions. Isoprene reacts with hydroxyl radicals (OH) and molecular oxygen to produce isoprene peroxy radicals (ISOPOO). These radicals can react with hydroperoxyl radicals (HO_2) to dominantly produce hydroxyhydroperoxides (ISOPOOH). They can also react with nitric oxide (NO) to largely produce methyl vinyl ketone (MVK) and methacrolein (MACR). Unimolecular isomerization and bimolecular reactions with organic peroxy radicals are also possible. There is uncertainty about the relative importance of each of these pathways in the atmosphere and possible changes because of anthropogenic pollution. Herein, measurements of ISOPOOH and MVK + MACR concentrations are reported over the central region of the Amazon basin during the wet season. The research site, downwind of an urban region, intercepted both background and polluted air masses during the GoAmazon2014/5 Experiment. Under background conditions, the confidence interval for the ratio of the ISOPOOH concentration to that of MVK + MACR spanned 0.4–0.6. This result implies a ratio of the reaction rate of ISOPOO with HO_2 to that with NO of approximately unity. A value of unity is significantly smaller than simulated at present by global chemical transport models for this important, nominally low-NO, forested region of Earth. Under polluted conditions, when the concentrations of reactive nitrogen compounds were high (>1 ppb), ISOPOOH concentrations dropped below the instrumental detection limit (<60 ppt). This abrupt shift in isoprene photooxidation, sparked by human activities, speaks to ongoing and possible future changes in the photochemistry active over the Amazon rainforest

Dependence of ozone production on NO and hydrocarbons in the troposphere

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/95525/1/grl10419.pd

Influence of urban pollution on the production of organic particulate matter from isoprene epoxydiols in central Amazonia

The atmospheric chemistry of isoprene contributes to the production of a substantial mass fraction of the particulate matter (PM) over tropical forests. Isoprene epoxydiols (IEPOX) produced in the gas phase by the oxidation of isoprene under HO2-dominant conditions are subsequently taken up by particles, thereby leading to production of secondary organic PM. The present study investigates possible perturbations to this pathway by urban pollution. The measurement site in central Amazonia was located 4 to 6 h downwind of Manaus, Brazil. Measurements took place from February through March 2014 of the wet season, as part of the GoAmazon2014/5 experiment. Mass spectra of organic PM collected with an Aerodyne Aerosol Mass Spectrometer were analyzed by positive-matrix factorization. One resolved statistical factor (IEPOX-SOA factor) was associated with PM production by the IEPOX pathway. The IEPOX-SOA factor loadings correlated with independently measured mass concentrations of tracers of IEPOX-derived PM, namely C5-alkene triols and 2-methyltetrols (R = 0. 96 and 0.78, respectively). The factor loading, as well as the ratio f of the loading to organic PM mass concentration, decreased under polluted compared to background conditions. For an increase in NOy concentration from 0.5 to 2 ppb, the factor loading and f decreased by two to three fold. Overall, sulfate concentration explained 37 % of the variability in the factor loading. After segregation of factor loading into subsets based on NOy concentration, the sulfate concentration explained up to 75 % of the variability. Considering both factors, the data sets show that the suppressing effects of increased NO concentrations dominated over the enhancing effects of higher sulfate concentrations. The pollution from Manaus elevated NOy concentrations more significantly than sulfate concentrations relative to background conditions. In this light, increased emissions of nitrogen oxides, as anticipated for some scenarios of Amazonian economic development, could significantly alter pathways of PM production that presently prevail over the tropical forest, implying changes to air quality and regional climate.</html

Isoprene photochemistry over the Amazon rainforest

Isoprene photooxidation is a major driver of atmospheric chemistry over forested regions. Isoprene reacts with hydroxyl radicals (OH) and molecular oxygen to produce isoprene peroxy radicals (ISOPOO). These radicals can react with hydroperoxyl radicals (HO2) to dominantly produce hydroxyhydroperoxides (ISOPOOH). They can also react with nitric oxide (NO) to largely produce methyl vinyl ketone (MVK) and methacrolein (MACR). Unimolecular isomerization and bimolecular reactions with organic peroxy radicals are also possible. There is uncertainty about the relative importance of each of these pathways in the atmosphere and possible changes because of anthropogenic pollution. Herein, measurements of ISOPOOH and MVK+MACR concentrations are reported over the central region of the Amazon basin during the wet season. The research site, downwind of an urban region, intercepted both background and polluted air masses during the GoAmazon2014/5 Experiment. Under background conditions, the confidence interval for the ratio of the ISOPOOH concentration to that of MVK+MACR spanned 0.4-0.6. This result implies a ratio of the reaction rate of ISOPOO with HO2 to that with NO of approximately unity. A value of unity is significantly smaller than simulated at present by global chemical transport models for this important, nominally low-NO, forested region of Earth. Under polluted conditions, when the concentrations of reactive nitrogen compounds were high (&gt;1 ppb), ISOPOOH concentrations dropped below the instrumental detection limit (&lt;60 ppt). This abrupt shift in isoprene photooxidation, sparked by human activities, speaks to ongoing and possible future changes in the photochemistry active over the Amazon rainforest

Intercomparison of airborne and surface-based measurements during the CLARIFY, ORACLES and LASIC field experiments

This is the final version. Available on open access from the European Geosciences Union via the DOI in this recordCode availability: Processing code for the FAAM core measurements suite is available from GitHub (Sproson et al., 2020).Data availability Airborne data for the CLARIFY campaign are available from the Centre for Environmental Data Analysis (Facility for Airborne Atmospheric Measurements et al., 2017) and for the ORACLES campaign from NASA Earth Science Project Office (ORACLES Science Team, 2020). The LASIC ground-based data sets are publicly available from the Atmospheric Radiation Measurement Climate Research Facility (Zuidema et al., 2017) with specialist data sets available for the following: SP2 – https://iop.archive.arm.gov/arm-iop/2016/ (last access: 25 October 2022, Sedlacek, 2017), CO – https://doi.org/10.5439/1046183 (Springston, 2018b), CAPS PMSSA – https://adc.arm.gov/discovery/#/results/s::caps-ssa (Onasch et al., 2015), ACSM – https://doi.org/10.5439/1763029 (Zawadowicz and Howie, 2021).Data are presented from intercomparisons between two research aircraft, the FAAM BAe-146 and the NASA Lockheed P3, and between the BAe-146 and the surface-based DOE (Department of Energy) ARM (Atmospheric Radiation Measurement) Mobile Facility at Ascension Island (8∘ S, 14.5∘ W; a remote island in the mid-Atlantic). These took place from 17 August to 5 September 2017, during the African biomass burning (BB) season. The primary motivation was to give confidence in the use of data from multiple platforms with which to evaluate numerical climate models. The three platforms were involved in the CLouds–Aerosol–Radiation Interaction and Forcing for Year 2017 (CLARIFY-2017), ObseRvations of Aerosols above CLouds and their intEractionS (ORACLES), and Layered Atlantic Smoke and Interactions with Clouds (LASIC) field experiments. Comparisons from flight segments on 6 d where the BAe-146 flew alongside the ARM facility on Ascension Island are presented, along with comparisons from the wing-tip-to-wing-tip flight of the P3 and BAe-146 on 18 August 2017. The intercomparison flight sampled a relatively clean atmosphere overlying a moderately polluted boundary layer, while the six fly-bys of the ARM site sampled both clean and polluted conditions 2–4 km upwind. We compare and validate characterisations of aerosol physical, chemical and optical properties as well as atmospheric radiation and cloud microphysics between platforms. We assess the performance of measurement instrumentation in the field, under conditions where sampling conditions are not as tightly controlled as in laboratory measurements where calibrations are performed. Solar radiation measurements compared well enough to permit radiative closure studies. Optical absorption coefficient measurements from all three platforms were within uncertainty limits, although absolute magnitudes were too low (<10 Mm−1) to fully support a comparison of the absorption Ångström exponents. Aerosol optical absorption measurements from airborne platforms were more comparable than aircraft-to-ground observations. Scattering coefficient observations compared adequately between airborne platforms, but agreement with ground-based measurements was worse, potentially caused by small differences in sampling conditions or actual aerosol population differences over land. Chemical composition measurements followed a similar pattern, with better comparisons between the airborne platforms. Thermodynamics, aerosol and cloud microphysical properties generally agreed given uncertainties.Natural Environment Research Council (NERC)NERC/Met Office Industrial Case studentshipResearch Council of NorwayUS Department of Energy, Office of ScienceNASAUS Department of Energy Atmospheric Systems Research (ASR) programm

Observation of ambient aerosol particle growth due to in-cloud processes within boundary layers

Journal of Geophysical Research, Vol. 112, D14207The article of record as published may be located at http://dx.doi.org/10.1029/2006JD007989.Aerosol microphysical and optical properties were measured on board the CIRPAS Twin Otter aircraft during 16 flights at the Southern Great Plain (SGP) site in northern central Oklahoma as part of the Aerosol Intensive Operation period in May 2003. Within well-mixed boundary layers on four cloudy days, vertical profiles measured on board the Twin Otter show that dry aerosol size, volume concentration, and scattering coefficients all increased with increasing altitude, whereas the total number concentration remained essentially constant. A one-dimensional model, which uses simultaneous meteorological measurements as inputs, shows that the observed increase in aerosol volume concentration with increasing altitude is consistent with in-cloud sulfate production at the top of the boundary layer. The sulfate production rate was sufficiently fast to overcome the homogenization resulting from turbulent mixing. In contrast, on cloud-free days, measurements on a second aircraft show nearly uniform aerosol volume concentrations within well-mixed boundary layers. The observed vertical gradients in aerosol volume concentration suggest that even within well-mixed boundary layers, surface measurements may not be representative of aerosols properties (e.g., loading and scattering coefficients, etc.) at elevated altitudes, especially when SO2 concentration and cloud coverage are high

Sensitivity of ozone production rate to ozone precursors

The photochemical equations describing O3 formation in the lower troposphere contain 2 major sink terms for free radicals; combination reactions and reactions with NOx. Knowing the fraction of radicals removed by reactions with NOx, termed LN/Q, allows one to predict the sensitivity of O3 production to NO and VOCs. We derive an analytic formula that gives LN/Q in terms of readily measured O3 precursors and test this formula using constrained steady state calculations based on field observations gathered in Phoenix, Arizona. The formula quantifies well‐known results regarding the effects of dilution, oxidation, and the production of oxidants on the transition from VOC to NOx sensitive behavior as an air parcel is advected away from an urban source

Photochemical age determinations in the Phoenix metropolitan area

An extensive VOC data set was gathered as part of a photochemical oxidant field campaign conducted in the Phoenix air basin in the late spring of 1998. Sampling was done at the surface and by aircraft at midboundary layer height; in regions with emission sources and downwind in the urban plume. VOC concentration ratios were used to calculate photochemical age, defined as the time integrated exposure of an air mass to OH radical. Based on the VOC ratios of 15 compounds (with OH reactivity varying between acetylene and p, m-xylene), we present estimates for photochemical age and dilution factors for several regions within the air basin. Geographic trends are in agreement with the expectation that pollutants are transported in a generally eastward direction so that older and more dilute mixtures occur to the east of the city. Photochemical ages determined from aircraft samples agree with those determined at a downwind surface site. The bias in photochemical age that occurs because fresh pollutants are added to an aged mixture has been quantified by using a particle trajectory model. A combination of trajectory results (actual age of the pollutants in an air mass) and photochemical age yields an estimate of the average OH concentration experienced by the air parcel. OH obtained in this way is somewhat lower, but has the same trends as OH concentrations calculated using a photochemical box model that is constrained with observed concentrations coincident with the VOC samples