Physiological responses of Arundo donax ecotypes to drought: a common garden study

Genetic analyses have suggested that the clonal reproduction of Arundo donax has resulted in low genetic diversity. However, an earlier common garden phenotyping experiment identified specimens of A. donax with contrasting biomass yields (ecotypes 6 and 20). We utilized the same well-established stands to investigate the photosynthetic and stress physiology of the A. donax ecotypes under irrigated and drought conditions. Ecotype 6 produced the largest yields in both treatments. The A. donax ecotypes exhibited identical high leaf-level rates of photosynthesis (PN) and stomatal conductance (Gs) in the well-watered treatment. Soil drying induced reductions in PN and Gs, decreased use of light energy for photochemistry, impaired function of photosystem II and increased heat dissipation similarly in the two ecotypes. Levels of biologically active free-abscisic acid (ABA) and fixed glycosylated-ABA increased earlier in response to the onset of water deficit in ecotype 6; however, as drought progressed, the ecotypes showed similar increases in both forms of ABA. This may suggest that because of the low genetic variability in A. donax the genes responding to drought might have been activated similarly in the two ecotypes, resulting in identical physiological responses to water deficit. Despite the lack of physiological ecotypic differences that could be associated with yield, A. donax retained a high degree of PN and biomass gain under water deficit stress conditions. This may enable utilization of A. donax as a fast growing biomass crop in rain-fed marginal lands in hot drought prone climates

Salinity and Water Stress Effects on Biomass Production in Different Arundo donax L. Clones

Perennial rhizomatous grasses are regarded as leading energy crops due to their environmental benefits and their suitability to regions with adverse conditions. In this paper, two different experiments were carried out in order to study the salinity (S) and water stress (WS) effects on biomass production in giant reed (Arundo donax L.). In Experiment 1, eight clones of giant reed were subjected to four salinity (S) and water stress (WS) treatments: (1) well watered with non-saline solution, (2) water stress with non-saline solution, (3) well watered with saline solution and 4) water stress with saline solution. In Experiment 2, five clones of giant reed were subjected to increasing S levels in two locations: University of Catania (UNICT-Italy) (1) well watered with non-saline solution and (2) well watered with mild saline solution; and University of Barcelona (UB-Spain) (3) well watered with non-saline solution and (4) well watered with severe saline solution. Photosynthetic and physiological parameters as well as biomass production were measured in these plants. According to our data, giant reed seems to be more tolerant to S than WS. Both stresses mainly affected stomatal closure to prevent dehydration of the plant, eventually decreasing the photosynthetic rate. The differential performance of the giant reed clones was ranked according to their tolerance to S and WS by using the Stress Susceptibility Index. 'Agrigento' was the most WS resistant clone and 'Martinensis' was the most S resistant. 'Martinensis' and 'Piccoplant' were found to be the most suitable clones for growing under both stress conditions. Moreover, 'Fondachello', 'Cefalú' and 'Licata' were the most resistant clones to increasing S levels

Marginal agricultural land low-input systems for biomass production

This study deals with approaches for a social-ecological friendly European bioeconomy based on biomass from industrial crops cultivated on marginal agricultural land. The selected crops to be investigated are: Biomass sorghum, camelina, cardoon, castor, crambe, Ethiopian mustard, giant reed, hemp, lupin, miscanthus, pennycress, poplar, reed canary grass, safflower, Siberian elm, switchgrass, tall wheatgrass, wild sugarcane, and willow. The research question focused on the overall crop growth suitability under low-input management. The study assessed: (i) How the growth suitability of industrial crops can be defined under the given natural constraints of European marginal agricultural lands; and (ii) which agricultural practices are required for marginal agricultural land low-input systems (MALLIS). For the growth-suitability analysis, available thresholds and growth requirements of the selected industrial crops were defined. The marginal agricultural land was categorized according to the agro-ecological zone (AEZ) concept in combination with the marginality constraints, so-called 'marginal agro-ecological zones' (M-AEZ). It was found that both large marginal agricultural areas and numerous agricultural practices are available for industrial crop cultivation on European marginal agricultural lands. These results help to further describe the suitability of industrial crops for the development of social-ecologically friendly MALLIS in Europe

Achieving hybridisation between Miscanthus species: Commercially-scalable methods to manipulate flowering synchronisation and maximise seed yield

Miscanthus is a high-yielding lignocellulosic perennial biomass crop. The low multiplication rate of clonal rhizome propagation is a bottleneck to upscaling plantation areas of feedstock needed to supply and expand the bioeconomy. Novel seeded Miscanthus hybrids are currently being developed to overcome this bottleneck by increasing annual multiplication rates from approximately 10 to over 1000 times. We describe a series of field experiments in southern Italy using agronomic methods to optimise multiplication rates through (i) planting configurations and densities, (ii) ratio of seed parents to pollen parents (iii) supplemental pre-dawn misting to increase humidity during pollination. In these trials the seed-bearing M. sinensis started flowering 2–3 weeks earlier than the M. sacchariflorus pollen parent. Earlier experiments indicated that flowering in M. sacchariflorus was mostly determined by photoperiod while in M. sinensis it was modulated by endogenous signals. Consequently, a second set of experiments were conducted to delay flowering time in M. sinensis: (iv) mid-season stem cut back, (v) oversupply of nitrogen, and (vi) undersupply of water. Across all treatments and years, the multiplication rates varied from 140 to 1300 seeds m². Reducing the proportion of the pollen parent plants (M. sacchariflorus) from 50 % to 25 % did not reduce seed yield per plant. This therefore increases the seed yield per m² and reduces seed production upscaling costs. Flowering time and duration in M. sinensis was significantly impacted by mid-season cutting and water stress, but not by nitrogen supply rates. Mid-season shoot cutting reduced number of flowers per plant (77 %), seed quantity (47 %), seed size (46 %), and resulted in seeds with a low germination rate of 39 %. High M. sinensis planting densities produced higher seed yields in the first year. However, in subsequent years higher density plots were more susceptible to autumn lodging lowering seed production by loss of panicles. Pre-dawn misting to prolong pollen life and stigma receptivity had no significant effects on seed production. This study demonstrates the importance of flowering time synchronization in the open field for commercial seed production. The limited effect of agronomic efforts to reduce the interspecies flowering time gap emphasises the importance of genetic factors in controlling flowering time. The most impactful intervention to change flowering time and improve parental synchronisation was mid-season cutting, while this method reduced seed production when applied to the seed parent it could be ideal for pollen parents

Properties of an alkali-thermo stable xylanase from Geobacillus thermodenitrificans A333 and applicability in xylooligosaccharides generation

An extracellular thermo-alkali-stable and cellulase-free xylanase from Geobacillus thermodenitrificans A333 was purified to homogeneity by ion exchange and size exclusion chromatography. Its molecular mass was 44 kDa as estimated in native and denaturing conditions by gel filtration and SDS-PAGE analysis, respectively. The xylanase (GtXyn) exhibited maximum activity at 70 °C and pH 7.5. It was stable over broad ranges of temperature and pH retaining 88 % of activity at 60 °C and up to 97 % in the pH range 7.5–10.0 after 24 h. Moreover, the enzyme was active up to 3.0 M sodium chloride concentration, exhibiting at that value 70 % residual activity after 1 h. The presence of other metal ions did not affect the activity with the sole exceptions of K+ that showed a stimulating effect, and Fe2+, Co2+ and Hg2+, which inhibited the enzyme. The xylanase was activated by non-ionic surfactants and was stable in organic solvents remaining fully active over 24 h of incubation in 40 % ethanol at 25 °C. Furthermore, the enzyme was resistant to most of the neutral and alkaline proteases tested. The enzyme was active only on xylan, showing no marked preference towards xylans from different origins. The hydrolysis of beechwood xylan and agriculture-based biomass materials yielded xylooligosaccharides with a polymerization degree ranging from 2 to 6 units and xylobiose and xylotriose as main products. These properties indicate G. thermodenitrificans A333 xylanase as a promising candidate for several biotechnological applications, such as xylooligosaccharides preparation

Breeding strategies to improve Miscanthus as a sustainable source of biomass for bioenergy and biorenewable products

Miscanthus, a C4 perennial grass native to Eastern Asia, is being bred to provide biomass for bioenergy and biorenewable products. Commercial expansion with the clonal hybrid M. × giganteus is limited by low multiplication rates, high establishment costs and drought sensitivity. These limitations can be overcome by breeding more resilient Miscanthus hybrids propagated by seed. Naturally occurring fast growing indigenous Miscanthus species are found in diverse environments across Eastern Asia. The natural diversity provides for plant breeders, the genetic resources to improve yield, quality, and resilience for a wide range of climates and adverse abiotic stresses. The challenge for Miscanthus breeding is to harness the diversity through selections of outstanding wild types, parents, and progenies over a short time frame to deploy hybrids that make a significant contribution to a world less dependent on fossil resources. Here are described the strategies taken by the Miscanthus breeding programme at Aberystwyth, UK and its partners. The programme built up one of the largest Miscanthus germplasm collections outside Asia. We describe the initial strategies to exploit the available genetic diversity to develop varieties. We illustrate the success of combining diverse Miscanthus germplasm and the selection criteria applied across different environments to identify promising hybrids and to develop these into commercial varieties. We discuss the potential for molecular selections to streamline the breeding process

Breeding progress and preparedness for mass‐scale deployment of perennial lignocellulosic biomass crops switchgrass, miscanthus, willow and poplar

UK: The UK‐led miscanthus research and breeding was mainly supported by the Biotechnology and Biological Sciences Research Council (BBSRC), Department for Environment, Food and Rural Affairs (Defra), the BBSRC CSP strategic funding grant BB/CSP1730/1, Innovate UK/BBSRC “MUST” BB/N016149/1, CERES Inc. and Terravesta Ltd. through the GIANT‐LINK project (LK0863). Genomic selection and genomewide association study activities were supported by BBSRC grant BB/K01711X/1, the BBSRC strategic programme grant on Energy Grasses & Bio‐refining BBS/E/W/10963A01. The UK‐led willow R&D work reported here was supported by BBSRC (BBS/E/C/00005199, BBS/E/C/00005201, BB/G016216/1, BB/E006833/1, BB/G00580X/1 and BBS/E/C/000I0410), Defra (NF0424) and the Department of Trade and Industry (DTI) (B/W6/00599/00/00). IT: The Brain Gain Program (Rientro dei cervelli) of the Italian Ministry of Education, University, and Research supports Antoine Harfouche. US: Contributions by Gerald Tuskan to this manuscript were supported by the Center for Bioenergy Innovation, a US Department of Energy Bioenergy Research Center supported by the Office of Biological and Environmental Research in the DOE Office of Science, under contract number DE‐AC05‐00OR22725. Willow breeding efforts at Cornell University have been supported by grants from the US Department of Agriculture National Institute of Food and Agriculture. Contributions by the University of Illinois were supported primarily by the DOE Office of Science; Office of Biological and Environmental Research (BER); grant nos. DE‐SC0006634, DE‐SC0012379 and DE‐SC0018420 (Center for Advanced Bioenergy and Bioproducts Innovation); and the Energy Biosciences Institute. EU: We would like to further acknowledge contributions from the EU projects “OPTIMISC” FP7‐289159 on miscanthus and “WATBIO” FP7‐311929 on poplar and miscanthus as well as “GRACE” H2020‐EU.3.2.6. Bio‐based Industries Joint Technology Initiative (BBI‐JTI) Project ID 745012 on miscanthus.Peer reviewedPostprintPublisher PD

Marginal Agricultural Land Low-Input Systems for Biomass Production

This study deals with approaches for a social-ecological friendly European bioeconomy based on biomass from industrial crops cultivated on marginal agricultural land. The selected crops to be investigated are: Biomass sorghum, camelina, cardoon, castor, crambe, Ethiopian mustard, giant reed, hemp, lupin, miscanthus, pennycress, poplar, reed canary grass, safflower, Siberian elm, switchgrass, tall wheatgrass, wild sugarcane, and willow. The research question focused on the overall crop growth suitability under low-input management. The study assessed: (i) How the growth suitability of industrial crops can be defined under the given natural constraints of European marginal agricultural lands; and (ii) which agricultural practices are required for marginal agricultural land low-input systems (MALLIS). For the growth-suitability analysis, available thresholds and growth requirements of the selected industrial crops were defined. The marginal agricultural land was categorized according to the agro-ecological zone (AEZ) concept in combination with the marginality constraints, so-called ‘marginal agro-ecological zones’ (M-AEZ). It was found that both large marginal agricultural areas and numerous agricultural practices are available for industrial crop cultivation on European marginal agricultural lands. These results help to further describe the suitability of industrial crops for the development of social-ecologically friendly MALLIS in Europe

Perennial biomass cropping and use: Shaping the policy ecosystem in European countries

Demand for sustainably produced biomass is expected to increase with the need to provide renewable commodities, improve resource security and reduce greenhouse gas emissions in line with COP26 commitments. Studies have demonstrated additional environmental benefits of using perennial biomass crops (PBCs), when produced appropriately, as a feedstock for the growing bioeconomy, including utilisation for bioenergy (with or without carbon capture and storage). PBCs can potentially contribute to Common Agricultural Policy (CAP) (2023–27) objectives provided they are carefully integrated into farming systems and landscapes. Despite significant research and development (R&D) investment over decades in herbaceous and coppiced woody PBCs, deployment has largely stagnated due to social, economic and policy uncertainties. This paper identifies the challenges in creating policies that are acceptable to all actors. Development will need to be informed by measurement, reporting and verification (MRV) of greenhouse gas emissions reductions and other environmental, economic and social metrics. It discusses interlinked issues that must be considered in the expansion of PBC production: (i) available land; (ii) yield potential; (iii) integration into farming systems; (iv) R&D requirements; (v) utilisation options; and (vi) market systems and the socio-economic environment. It makes policy recommendations that would enable greater PBC deployment: (1) incentivise farmers and land managers through specific policy measures, including carbon pricing, to allocate their less productive and less profitable land for uses which deliver demonstrable greenhouse gas reductions; (2) enable greenhouse gas mitigation markets to develop and offer secure contracts for commercial developers of verifiable low-carbon bioenergy and bioproducts; (3) support innovation in biomass utilisation value chains; and (4) continue long-term, strategic R&D and education for positive environmental, economic and social sustainability impacts