Modulating Retro-Reflectors: Technology, Link Budgets and Applications

Satellite communications systems today -- usually radio frequency (RF) -- tend to have low data rates and use a lot of on-board power. For CubeSats, communications often dominate the power budget. We investigate the use of modulating retro-reflectors (MRRs), previously demonstrated on the ground, for high data-rate communication downlinks from small satellites. A laser ground station would illuminate a retro-reflector on-board the satellite while an element in the retro-reflector modulates the intensity of the reflected signal, thereby encoding a data stream on the returning beam. A detector on the ground receives the data, keeping the complex systems and the vast majority of power consumption on the ground. Reducing the power consumption while increasing data rates would relax constraints on power budgets for small satellites, leaving more power available for payloads. In the future, this could enable the use of constellations of nano-satellites for a variety of missions, possibly leading to a paradigm shift in small satellite applications

PhoneSat In-flight Experience Results

Over the last decade, consumer technology has vastly improved its performances, become more affordable and reduced its size. Modern day smartphones offer capabilities that enable us to figure out where we are, which way we are pointing, observe the world around us, and store and transmit this information to wherever we want. These capabilities are remarkably similar to those required for multi-million dollar satellites. The PhoneSat project at NASA Ames Research Center is building a series of CubeSat-size spacecrafts using an off-the-shelf smartphone as its on-board computer with the goal of showing just how simple and cheap space can be. Since the PhoneSat project started, different suborbital and orbital flight activities have proven the viability of this revolutionary approach. In early 2013, the PhoneSat project launched the first triage of PhoneSats into LEO. In the five day orbital life time, the nano-satellites flew the first functioning smartphone-based satellites (using the Nexus One and Nexus S phones), the cheapest satellite (a total parts cost below $3,500) and one of the fastest on-board processors (CPU speed of 1GHz). In this paper, an overview of the PhoneSat project as well as a summary of the in-flight experimental results is presented

LightForce: An Update on Orbital Collision Avoidance Using Photon Pressure

We present an update on our research on collision avoidance using photon-pressure induced by ground-based lasers. In the past, we have shown the general feasibility of employing small orbit perturbations, induced by photon pressure from ground-based laser illumination, for collision avoidance in space. Possible applications would be protecting space assets from impacts with debris and stabilizing the orbital debris environment. Focusing on collision avoidance rather than de-orbit, the scheme avoids some of the security and liability implications of active debris removal, and requires less sophisticated hardware than laser ablation. In earlier research we concluded that one ground based system consisting of a 10 kW class laser, directed by a 1.5 m telescope with adaptive optics, could avoid a significant fraction of debris-debris collisions in low Earth orbit. This paper describes our recent efforts, which include refining our original analysis, employing higher fidelity simulations and performing experimental tracking tests. We investigate the efficacy of one or more laser ground stations for debris-debris collision avoidance and satellite protection using simulations to investigate multiple case studies. The approach includes modeling of laser beam propagation through the atmosphere, the debris environment (including actual trajectories and physical parameters), laser facility operations, and simulations of the resulting photon pressure. We also present the results of experimental laser debris tracking tests. These tests track potential targets of a first technical demonstration and quantify the achievable tracking performance

Micro Cathode Arc Thruster for PhoneSat: Development and Potential Applications

NASA Ames Research Center and the George Washington University are developing an electric propulsion subsystem that will be integrated into the PhoneSat bus. Experimental tests have shown a reliable performance by firing three different thrusters at various frequencies in vacuum conditions. The interface consists of a microcontroller that sends a trigger pulse to the Pulsed Plasma Unit that is responsible for the thruster operation. A Smartphone is utilized as the main user interface for the selection of commands that control the entire system. The propellant, which is the cathode itself, is a solid cylinder made of Titanium. This simplicity in the design avoids miniaturization and manufacturing problems. The characteristics of this thruster allow an array of CATs to perform attitude control and orbital correction maneuvers that will open the door for the implementation of an extensive collection of new mission concepts and space applications for CubeSats. NASA Ames is currently working on the integration of the system to fit the thrusters and the PPU inside a 1.5U CubeSat together with the PhoneSat bus. This satellite is intended to be deployed from the ISS in 2015 and test the functionality of the thrusters by spinning the satellite around its long axis and measure the rotational speed with the phone gyros. This test flight will raise the TRL of the propulsion system from 5 to 7 and will be a first test for further CubeSats with propulsion systems, a key subsystem for long duration or interplanetary small satellite missions

Identification of regulatory variants associated with genetic susceptibility to meningococcal disease.

Non-coding genetic variants play an important role in driving susceptibility to complex diseases but their characterization remains challenging. Here, we employed a novel approach to interrogate the genetic risk of such polymorphisms in a more systematic way by targeting specific regulatory regions relevant for the phenotype studied. We applied this method to meningococcal disease susceptibility, using the DNA binding pattern of RELA - a NF-kB subunit, master regulator of the response to infection - under bacterial stimuli in nasopharyngeal epithelial cells. We designed a custom panel to cover these RELA binding sites and used it for targeted sequencing in cases and controls. Variant calling and association analysis were performed followed by validation of candidate polymorphisms by genotyping in three independent cohorts. We identified two new polymorphisms, rs4823231 and rs11913168, showing signs of association with meningococcal disease susceptibility. In addition, using our genomic data as well as publicly available resources, we found evidences for these SNPs to have potential regulatory effects on ATXN10 and LIF genes respectively. The variants and related candidate genes are relevant for infectious diseases and may have important contribution for meningococcal disease pathology. Finally, we described a novel genetic association approach that could be applied to other phenotypes

Plasma lipid profiles discriminate bacterial from viral infection in febrile children

Fever is the most common reason that children present to Emergency Departments. Clinical signs and symptoms suggestive of bacterial infection are often non-specific, and there is no definitive test for the accurate diagnosis of infection. The 'omics' approaches to identifying biomarkers from the host-response to bacterial infection are promising. In this study, lipidomic analysis was carried out with plasma samples obtained from febrile children with confirmed bacterial infection (n = 20) and confirmed viral infection (n = 20). We show for the first time that bacterial and viral infection produces distinct profile in the host lipidome. Some species of glycerophosphoinositol, sphingomyelin, lysophosphatidylcholine and cholesterol sulfate were higher in the confirmed virus infected group, while some species of fatty acids, glycerophosphocholine, glycerophosphoserine, lactosylceramide and bilirubin were lower in the confirmed virus infected group when compared with confirmed bacterial infected group. A combination of three lipids achieved an area under the receiver operating characteristic (ROC) curve of 0.911 (95% CI 0.81 to 0.98). This pilot study demonstrates the potential of metabolic biomarkers to assist clinicians in distinguishing bacterial from viral infection in febrile children, to facilitate effective clinical management and to the limit inappropriate use of antibiotics

Modulating Retro-Reflector CubeSat Payload operating at 1070 nm for Asymmetric Free-Space Optical Communications

Preceding papers submitted to this conference introduced the concept of modulating retroreflectors (MRR) for free space optical communications. The major advantage of MRRs over conventional laser communication systems is that they require significantly less pointing accuracy on the spacecraft; typical values are between a few degrees to 10s of degrees. However, this advantage is bought at the price of an increased optical power from the ground station on the order of several kilowatts. Lasers capable of producing these relatively high continuous optical powers are commercially available, but only in a limited subset of wavelengths, typically ranging from 1.0 to 1.1 microns. Consequently, to take advantage of these commercially available lasers, MRRs operating in a corresponding wavelength, at sufficiently high data rates, with an adequate aperture are required. Modulators based on multiple quantum wells fulfill the latter two requirements but had not been demonstrated in the specified wavelength range. In the first part of this paper we describe design, production and testing of a multiple quantum well MRR that operates at a wavelength of 1070 nm. This wavelength corresponds to that of the popular Ytterbium doped fiber lasers which are extensively used in laser machining. The second part of the paper describes the design and testing of driver electronics in a 1U form factor, allowing the MRR to operate in a cubesat. The driver is versatile and can therefore act either as a communication subsystem or an independent payload that could be utilized for a technical demonstration of the MRR technology in space

Microhard MHX2420 Orbital Performance Evaluation Using RT Logic T400CS

A major upfront cost of building low cost Nanosatellites is the communications sub-system. Most radios built for space missions cost over $4,000 per unit. This exceeds many budgets. One possible cost effective solution is the Microhard MHX2420, a commercial off-the-shelf transceiver with a unit cost under$1000. This paper aims to support the Nanosatellite community seeking an inexpensive radio by characterizing Microhard’s performance envelope. Though not intended for space operations, the ability to test edge cases and increase average data transfer speeds through optimization positions this radio as a solution for Nanosatellite communications by expanding usage to include more missions. The second objective of this paper is to test and verify the optimal radio settings for the most common cases to improve downlinking. All tests were conducted with the aid of the RT Logic T400CS, a hardware-in-the-loop channel simulator designed to emulate real-world radio frequency (RF) link effects. This study provides recommended settings to optimize the downlink speed as well as the environmental parameters that cause the link to fail

Seminario de Investigación Académica II (Ing) - IN397 - 202100

Seminario de Investigación Académica II es un curso de especialidad en la carrera de Ingeniería Industrial, el objetivo es desarrollar el proyecto de tesis enfocado en resolver problemas del contexto de la realidad del sector. El curso se desarrolla en cinco unidades de aprendizaje, con sesiones teóricas que van desde las etapas básicas del proceso de investigación científica, la propuesta inicial del tema de investigación, la identificación y diagnóstico del problema, la construcción del estado del arte que sustenta el informe final con el tema de tesis. El proceso es sistemático, continuo, enriquecedor en función a las variantes que se presentan durante el tiempo de búsqueda, selección y análisis de la información que sustenta el tema de tesis, en este proceso, es permanente el acompañamiento basado en recomendaciones, técnicas y estrategias por parte del equipo de docentes conformado por el asesor metodológico y el asesor temático. Propósito: El propósito de este curso es que el estudiante inicie el plan de tesis en el que se evidencia la aplicación práctica de su carrera, mediante la gestión de información académica, relevante para su tesis y, a partir de ella, plantear un problema de investigación susceptible a una posible solución. En el curso se contribuye al desarrollo de las competencias generales: comunicación oral, comunicación escrita y manejo de información todas a nivel 2. Por otro lado, también se busca el desarrollo de las competencias específicas de ABET (7): Capacidad de adquirir y aplicar nuevos conocimientos según sea necesario, utilizando estrategias de aprendizaje apropiadas, a nivel 2. Tiene como requisito el nivel 5 de inglés y haber alcanzado los 120 créditos