Experimental characterisation on the behaviour of PLLA for stretch blowing moulding of bioresorbable vascular scaffolds

Processing tubes from poly (l-lactic acid) (PLLA) by stretch blow moulding (SBM) is used in the manufacture of bioresorbable vascular scaffolds (BVS) to improve their mechanical performance. To better understand this processing technique, a novel experimental setup by free stretch blow inside a water bath was developed to visualise the tube forming process and analyse the deformation behaviour. PLLA tubes were heated, stretched and blown with no mould present inside a temperature-controlled water bath whilst recording the processing parameters (axial force, inflation pressure). The onset of pressure activation relative to the axial stretch was controlled deliberately to produce a simultaneous (SIM) or sequential (SEQ) mode of deformation. Real-time images of the tube during forming were captured using high speed cameras and the surface strain of the patterned tube was extracted using digital image correlation (DIC). The deformation characteristics of PLLA tubes in SBM was quantified by analysis of shape evolution, strain history and stress-strain relationship

A Multiple FSK Microprocessor Demodulator/Decoder

International Telemetering Conference Proceedings / November 14-16, 1978 / Hyatt House Hotel, Los Angeles, CaliforniaA demodulator is described that utilizes an interrupt-driven 8-bit microprocessor and an external digital counter to demodulate an 8-ary Frequency-Shift-Keyed input signal. After demodulation, the system correlates received groups of symbols with a stored code to derive and maintain character synchronization, and compute the decoded and error corrected output. The total device package count is less than 10, including the microprocessor with integral read/write memory and clock driver circuits, a Parallel Interface Adapter, a 1024 X 8-bit ROM, an 8-bit digital counter, a two-pole filter, a limiter and complete input and output buffering.International Foundation for TelemeteringProceedings from the International Telemetering Conference are made available by the International Foundation for Telemetering and the University of Arizona Libraries. Visit http://www.telemetry.org/index.php/contact-us if you have questions about items in this collection

Accuracy of professional judgments for dermal exposure assessment using deterministic models

The accuracy of exposure judgments, particularly for scenarios where only qualitative information is available or a systematic approach is not used, have been evaluated and shown to have a relatively low level of accuracy. This is particularly true for dermal exposures, where less information is generally available compared to inhalation exposures. Relatively few quantitative validation efforts have been performed for scenarios where dermal exposures are of interest. In this study, a series of dermal exposure judgments were collected from 90 volunteer U.S. occupational health practitioners in a workshop format to assess the accuracy of their judgments for three specific scenarios. Accuracy was defined as the ability of the participants to identify the correct reference exposure category, as defined by the quantitative exposure banding categories utilized by the American Industrial Hygiene Association (AIHA). The participants received progressively additional information and training regarding dermal exposure assessments and scenario-specific information during the workshop, and the relative accuracy of their category judgments over time was compared. The results of the study indicated that despite substantial education and training in exposure assessment generally, the practitioners had very little experience in performing dermal exposure assessments and a low level of comfort in performing these assessments. Further, contrary to studies of practitioners performing inhalation exposure assessments demonstrating a trend towards underestimating exposures, participants in this study consistently overestimated the potential for dermal exposure without quantitative data specific to the scenario of interest. Finally, it was found that participants were able to identify the reference or “true” category of dermal exposure acceptability when provided with relevant, scenario-specific dermal and/or surface loading data for use in the assessment process. These results support the need for additional training and education of practitioners in performing dermal exposure assessments. A closer analysis of default loading values used in dermal exposure assessments to evaluate their accuracy relative to real-world or measured dermal loading values, along with consistent improvements in current dermal models, is also needed.</p