In situ bioremediation: Cost effectiveness of a remediation technology field tested at the Savannah River

In Situ Bioremediation (ISBR) is an innovative new remediation technology for the removal of chlorinated solvents from contaminated soils and groundwater. The principal contaminant at the SRID is the volatile organic compound (VOC), tricloroetylene(TCE). A 384 day test run at Savannah River, sponsored by the US Department of Energy, Office of Technology Development (EM-50), furnished information about the performance and applications of ISBR. In Situ Bioremediation, as tested, is based on two distinct processes occurring simultaneously; the physical process of in situ air stripping and the biolgoical process of bioremediation. Both processes have the potential to remediate some amount of contamination. A quantity of VOCs, directly measured from the extracted air stream, was removed from the test area by the physical process of air stripping. The biological process is difficult to examine. However, the results of several tests performed at the SRID and independent numerical modeling determined that the biological process remediated an additional 40% above the physical process. Given this data, the cost effectiveness of this new technology can be evaluated

Spillovers from Foreign Direct Investment in Central and Eastern Europe. An index for measuring a country’s potential to benefit from technology spillovers

In the paper, we construct a composite indicator to estimate the potential of four Central and Eastern European countries (the Czech Republic, Hungary, Poland and Slovakia) to benefit from productivity spillovers from foreign direct investment (FDI) in the manufacturing sector. Such transfers of technology are one of the main benefits of FDI for the host country, and should also be one of the main determinants of FDI incentives offered to investing multinationals by governments, but they are difficult to assess ex ante. For our composite index, we use six components to proxy the main channels and determinants of these spillovers. We have tried several weighting and aggregation methods, and we consider our results robust. According to the analysis of our results, between 2003 and 2007 all four countries were able to increase their potential to benefit from such spillovers, although there are large differences between them. The Czech Republic clearly has the most potential to benefit from productivity spillovers, while Poland has the least. The relative positions of Hungary and Slovakia depend to some extent on the exact weighting and aggregation method of the individual components of the index, but the differences are not large. These conclusions have important implication both the investment strategies of multinationals and government FDI policies

Q-Strategy: A Bidding Strategy for Market-Based Allocation of Grid Services

The application of autonomous agents by the provisioning and usage of computational services is an attractive research field. Various methods and technologies in the area of artificial intelligence, statistics and economics are playing together to achieve i) autonomic service provisioning and usage of Grid services, to invent ii) competitive bidding strategies for widely used market mechanisms and to iii) incentivize consumers and providers to use such market-based systems. The contributions of the paper are threefold. First, we present a bidding agent framework for implementing artificial bidding agents, supporting consumers and providers in technical and economic preference elicitation as well as automated bid generation by the requesting and provisioning of Grid services. Secondly, we introduce a novel consumer-side bidding strategy, which enables a goal-oriented and strategic behavior by the generation and submission of consumer service requests and selection of provider offers. Thirdly, we evaluate and compare the Q-strategy, implemented within the presented framework, against the Truth-Telling bidding strategy in three mechanisms – a centralized CDA, a decentralized on-line machine scheduling and a FIFO-scheduling mechanisms

Rational bidding using reinforcement learning: an application in automated resource allocation

The application of autonomous agents by the provisioning and usage of computational resources is an attractive research field. Various methods and technologies in the area of artificial intelligence, statistics and economics are playing together to achieve i) autonomic resource provisioning and usage of computational resources, to invent ii) competitive bidding strategies for widely used market mechanisms and to iii) incentivize consumers and providers to use such market-based systems. The contributions of the paper are threefold. First, we present a framework for supporting consumers and providers in technical and economic preference elicitation and the generation of bids. Secondly, we introduce a consumer-side reinforcement learning bidding strategy which enables rational behavior by the generation and selection of bids. Thirdly, we evaluate and compare this bidding strategy against a truth-telling bidding strategy for two kinds of market mechanisms – one centralized and one decentralized

Supporting multiattribute decisions in scenario planning using a simple method based on ranks

A neglected area of scenario planning is the provision of support for strategic decisions that involve multiple attributes. When the number of scenarios and attributes is large, conventional multiattribute decision analysis methods require the elicitation of a large number of values and weights, which can be demanding and time consuming for decision makers. This paper examines the effectiveness of using a simple approximation to the simple multiattribute rating method (SMART) that is based purely on the ranking of options and attributes. The method was tested on 250,000 simulated decision problems and was found to perform well when assessed on the basis of its hit rate (the percentage of times it identified the same best option as SMART) and the utility loss resulting from the approximation. In large problems, where simplifications are likely to be most useful, it outperformed an alternative approximation method, SMARTER, which is more complex to apply, and it was almost as effective as SMARTER on smaller problems

Analysis of pairwise comparison matrices: an empirical research

Pairwise comparison (PC) matrices are used in multi-attribute decision problems (MADM) in order to express the preferences of the decision maker. Our research focused on testing various characteristics of PC matrices. In a controlled experiment with university students (N = 227) we have obtained 454 PC matrices. The cases have been divided into 18 subgroups according to the key factors to be analyzed. Our team conducted experiments with matrices of different size given from different types of MADM problems. Additionally, the matrix elements have been obtained by different questioning procedures differing in the order of the questions. Results are organized to answer five research questions. Three of them are directly connected to the inconsistency of a PC matrix. Various types of inconsistency indices have been applied. We have found that the type of the problem and the size of the matrix had impact on the inconsistency of the PC matrix. However, we have not found any impact of the questioning order. Incomplete PC matrices played an important role in our research. The decision makers behavioral consistency was as well analyzed in case of incomplete matrices using indicators measuring the deviation from the final order of alternatives and from the final score vector

Modeling Supply Networks and Business Cycles as Unstable Transport Phenomena

Physical concepts developed to describe instabilities in traffic flows can be generalized in a way that allows one to understand the well-known instability of supply chains (the so-called ``bullwhip effect''). That is, small variations in the consumption rate can cause large variations in the production rate of companies generating the requested product. Interestingly, the resulting oscillations have characteristic frequencies which are considerably lower than the variations in the consumption rate. This suggests that instabilities of supply chains may be the reason for the existence of business cycles. At the same time, we establish some link to queuing theory and between micro- and macroeconomics.Comment: For related work see http://www.helbing.or

The rank reversal problem in multi-criteria decision making : a literature review

Despite the importance of multicriteria decision-making (MCDM) techniques for constructing effective decision models, there are many criticisms due to the occurrence of a problem called rank reversal. Nevertheless, there is a lack of a systematic literature review on this important subject which involves different methods. This study reviews the pertinent literature on rank reversal, based on 130 related articles published from 1980 to 2015 in international journals, which were gathered and analyzed according to the following perspectives: multicriteria technique, year and journal in which the papers were published, co-authorship network, rank reversal types, and research goal. Thus our survey provides recommendations for future research, besides useful information and knowledge regarding rank reversal in the MCDM field

The sweet spot in sustainability: a framework for corporate assessment in sugar manufacturing

The assessment of corporate sustainability has become an increasingly important topic, both within academia and in industry. For manufacturing companies to conform to their commitments to sustainable development, a standard and reliable measurement framework is required. There is, however, a lack of sector-specific and empirical research in many areas, including the sugar industry. This paper presents an empirically developed framework for the assessment of corporate sustainability within the Thai sugar industry. Multiple case studies were conducted, and a survey using questionnaires was also employed to enhance the power of generalisation. The developed framework is an accurate and reliable measurement instrument of corporate sustainability, and guidelines to assess qualitative criteria are put forward. The proposed framework can be used for a company’s self-assessment and for guiding practitioners in performance improvement and policy decision-maki

A holistic multi-methodology for sustainable renovation

A review of the barriers for building renovation has revealed a lack of methodologies, which can promote sustainability objectives and assist various stakeholders during the design stage of building renovation/retrofitting projects. The purpose of this paper is to develop a Holistic Multi-methodology for Sustainable Renovation, which aims to deal with complexity of renovation projects. It provides a framework through which to involve the different stakeholders in the design process to improve group learning and group decision-making, and hence make the building renovation design process more robust and efficient. Therefore, the paper discusses the essence of multifaceted barriers in building renovation regarding cultural changes and technological/physical changes. The outcome is a proposal for a multi-methodology framework, which is developed by introducing, evaluating and mixing methods from Soft Systems Methodologies (SSM) with Multiple Criteria Decision Making (MCDM). The potential of applying the proposed methodology in renovation projects is demonstrated through a case study