Carbon Nanostructure‐Based Scale Sensors Using Inkjet Printing and Casting Techniques

In this chapter, the fabrication and characterization of scale sensor using carbon nanotubes (CNTs) are discussed. Two different methods are used to prepare the carbon nanomaterials for the sensor fabrication: CNT casting and the CNT inkjet printing. In addition, the sensors are integrated into Kelvin architectures. The electrical resistance of the carbon nanomaterial films is measured with and without adding a drop of brine to the surface of the film. The films are characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), transmission electron microscopy (TEM), and energy dispersive X‐ray spectroscopy (EDS). Electrical resistance of the casted CNT films and five layers of CNT inkjet printing are found to be close to 40.0 kΩ and 1.00 kΩ, respectively. Adding one drop of brine solution on the surface of the casted CNT film and five layers of CNT inkjet printing changed the resistance by 50% and 75%, respectively. The resetting process is done for all sensors by soaking in deionized water (DI water) for some time, and the electrical resistance is measured and found to be close to the initial electrical resistance

Nanofluids Based on Carbon Nanostructures

A nanofluid consists in a liquid suspension of nanometer-sized particles. These fluids may contain (or not) surface-active agents to aid in the suspension of the particles. Nanometer-sized particles have higher thermal conductivity than the base fluids. Oxides, metals, nitrides, and nonmetals, like carbon nanotubes, can be used as nanoparticles in nanofluids. Water, ethylene glycol, oils, and polymer solutions can be used as base fluids. In this chapter, we summarize the recent studies of using CNTs and graphene to improve the thermal conductivity of nanofluids. Moreover, we refer to the studies about the effect of using magnetic fields on enhancing the thermal conductivity of nanofluids. Too much discrepancy about thermal conductivity of nanofluids can be found in the literature. For carbon nanofluids, unfortunately, no significant improvements on thermal conductivity are observed using low concentrations. Different improvement percentages have been reported. This variation in the thermal conductivity can be attributed to many factors, such as particle size temperature, pH, or zeta potential. We believe that more research efforts need to be made in order to, first, improve the thermal conductivity of nanofluids and, second, assess the effect of the different parameters and conditions on the thermal conductivity of nanofluids

Effect of Saline Solution on the Electrical Response of Single Wall Carbon Nanotubes-Epoxy Nanocomposites

The effects of saline solution on the electrical resistance of single wall carbon nanotubes-epoxy nanocomposites have been investigated experimentally. Ultrasonic assisted fabricated 1.0% and 0.5 W/W% SWCNTs epoxy nanocomposites are integrated into a Kelvin structure by smear cast the nanocomposites on a glass wafer. Four metal pads are deposited on the nanocomposites using the beam evaporator and wires are tethered using soldering. The effect of saline solution on the electrical resistance of the nanocomposites is studied by adding drop of saline solution to the surface of the fabricated nanocomposites and measuring electrical resistance. Moreover, the nanocomposites are soaked completely into 3 wt.% saline solution and real-time measurement of the electrical resistance is conducted. It is found that a drop of saline solution on the surface of the nanocomposites film increases the resistance by 50%. Furthermore, the real-time measurement reveals a 40% increase in the resistance of the nanocomposites film. More importantly, the nanocomposites are successfully reset by soaking in DI water for four hours. This study may open the door for using SWCNTs epoxy nanocomposites as scale sensors in oil and gas industry

Decreased glutathione levels and impaired antioxidant enzyme activities in drug-naive first-episode schizophrenic patients

<p>Abstract</p> <p>Background</p> <p>The aim of this study was to determine glutathione levels and antioxidant enzyme activities in the drug-naive first-episode patients with schizophrenia in comparison with healthy control subjects.</p> <p>Methods</p> <p>It was a case-controlled study carried on twenty-three patients (20 men and 3 women, mean age = 29.3 ± 7.5 years) recruited in their first-episode of schizophrenia and 40 healthy control subjects (36 men and 9 women, mean age = 29.6 ± 6.2 years). In patients, the blood samples were obtained prior to the initiation of neuroleptic treatments. Glutathione levels: total glutathione (GSHt), reduced glutathione (GSHr) and oxidized glutathione (GSSG) and antioxidant enzyme activities: superoxide dismutase (SOD), glutathione peroxidase (GPx), catalase (CAT) were determined by spectrophotometry.</p> <p>Results</p> <p>GSHt and reduced GSHr were significantly lower in patients than in controls, whereas GSSG was significantly higher in patients. GPx activity was significantly higher in patients compared to control subjects. CAT activity was significantly lower in patients, whereas the SOD activity was comparable to that of controls.</p> <p>Conclusion</p> <p>This is a report of decreased plasma levels of GSHt and GSHr, and impaired antioxidant enzyme activities in drug-naive first-episode patients with schizophrenia. The GSH deficit seems to be implicated in psychosis, and may be an important indirect biomarker of oxidative stress in schizophrenia early in the course of illness. Finally, our results provide support for further studies of the possible role of antioxidants as neuroprotective therapeutic strategies for schizophrenia from early stages.</p

EPIdemiology of Surgery-Associated Acute Kidney Injury (EPIS-AKI) : Study protocol for a multicentre, observational trial

More than 300 million surgical procedures are performed each year. Acute kidney injury (AKI) is a common complication after major surgery and is associated with adverse short-term and long-term outcomes. However, there is a large variation in the incidence of reported AKI rates. The establishment of an accurate epidemiology of surgery-associated AKI is important for healthcare policy, quality initiatives, clinical trials, as well as for improving guidelines. The objective of the Epidemiology of Surgery-associated Acute Kidney Injury (EPIS-AKI) trial is to prospectively evaluate the epidemiology of AKI after major surgery using the latest Kidney Disease: Improving Global Outcomes (KDIGO) consensus definition of AKI. EPIS-AKI is an international prospective, observational, multicentre cohort study including 10 000 patients undergoing major surgery who are subsequently admitted to the ICU or a similar high dependency unit. The primary endpoint is the incidence of AKI within 72 hours after surgery according to the KDIGO criteria. Secondary endpoints include use of renal replacement therapy (RRT), mortality during ICU and hospital stay, length of ICU and hospital stay and major adverse kidney events (combined endpoint consisting of persistent renal dysfunction, RRT and mortality) at day 90. Further, we will evaluate preoperative and intraoperative risk factors affecting the incidence of postoperative AKI. In an add-on analysis, we will assess urinary biomarkers for early detection of AKI. EPIS-AKI has been approved by the leading Ethics Committee of the Medical Council North Rhine-Westphalia, of the Westphalian Wilhelms-University Münster and the corresponding Ethics Committee at each participating site. Results will be disseminated widely and published in peer-reviewed journals, presented at conferences and used to design further AKI-related trials. Trial registration number NCT04165369

Synthesis of monodisperse anionic submicron polystyrene particles by stabilizer-free dispersion polymerization in alcoholic media

In this work, monodisperse polystyrene (PS) particles were synthesized in ethanol/water medium using sodium salt of styrene sulfonic acid and 2,2'-azobis(isobutyronitrile) as ionic comonomer and nonionic initiator, respectively. The polymerization was carried out at low agitation speed, and no stabilizer (or surfactant) was added to the polymerization medium. This polymerization system (stabilizer-free dispersion polymerization) was initiated as a homogeneous solution of monomer, comonomer, medium, and initiator. With the production of free radicals, polymerization developed into a heterogeneous system. The effect of various polymerization conditions on the size and size distribution of the obtained particles was evaluated. The experimental results showed that with an increase in ethanol content, the size of the particles increased while no significant change was observed in particle size distribution. Furthermore, with increasing ionic comonomer content, the size of the particles decreased and their size distribution became broader. Moreover, it was observed that addition of an electrolyte to the polymerization medium also increased the particles' size and broadened their size distribution. It is noteworthy to point out that the coagulation occurred in higher amounts of electrolyte. Finally, it is concluded that the polar component of Hansen solubility parameter of the polymerization medium affects the particle size and particle size distribution greatly