Foot Deformity Correction with Hexapod External Fixator, the Ortho-SUV Frame™

External fixators enable distraction osteogenesis and gradual foot deformity corrections. Hexapod fixators have become more popular than the Ilizarov apparatus. The Ortho-SUV Frame™ (OSF; Ortho-SUV Ltd, St. Petersburg, Russia), a hexapod that was developed in 2006, allows flexible joint attachment such that multiple assemblies are available. We assessed the reduction capability of several assemblies. An artificial bone model with a 270-mm-long longitudinal foot was used. A 130-mm tibial full ring was attached 60 mm proximal to the ankle joint. A 140-mm, two-third ring forefoot was attached perpendicular to the metatarsal bone axis. A 130-mm, two-third ring hindfoot was attached parallel to the tibial ring. A V-osteotomy, which was combined with 2 oblique osteotomies at the navicular-cuboid bone and the calcaneus, was performed. The middle part of the foot, including the talus, was connected to the tibial ring. We assessed 5 types of forefoot applications and 4 types of hindfoot applications. The range of correction included flexion/extension in the sagittal plane, adduction/abduction in the horizontal plane, and pronation/supination in the coronal plane. Additionally, we reported the short-term results in 9 clinical cases. The forefoot applications in which the axis of the hexapod was parallel to the axis of the metatarsal bones had good results, with 52°/76° for flexion/extension, 48°/53° for adduction/abduction, and 43°/51° for pronation/supination. The hindfoot applications in which the hexapod encircled the ankle joint also had good results, with corresponding values of 47°/58°, 20°/35°, and 28°/31°. Clinically, all deformities were corrected as planned. Thus, multiple assemblies and a wide range of corrections are available with the OSF. © 2013 American College of Foot and Ankle Surgeons

CORRECTION OF FEMUR DEFORMITIES BY ILIZAROV METHOD AND BY APPARATUS «ORTHO-SUV» BASED ON COMPUTER NAVIGATION

Results of correction of femur deformations by Ilizarov method and with apparatus Orto-SuV working on the basis of computer navigation are analyzed. For elimination of difficult deformations in order to avoid multiple external fixator remounting with stage-by-stage radiological control it is expedient to use apparatus Orto-SUV. In order to elimination of moderate and simple deformations (except torsion) as hexapods and traditional techniques can be a choice method. The use «Orto-SUV» apparatus allows to reduce time necessary for deformation correction and osteosynthesis term in 1,4–2,4 times (for average and severe deformations)

Experimental Modeling of Combined and Sequential Use of Transosseous and Intramedullary Blocking Osteosynthesis

Background. The introduction of the combined and sequential application of transosseous and intramedullary blocked osteosynthesis in limb lengthening requires an experimental study of the features of distraction regenerate. For small animals (in particular rabbits), special models are required.Aims. To develop experimental models of sequential and combined use of transosseous and intramedullary osteosynthesis in limb lengthening and substantiate their effectiveness.Materials and methods. A comparative study was carried out on 30 rabbits of the Soviet Chinchilla breed. Experimental models of sequential (EM-1) and combined (EM-2) application of transosseous and intramedullary osteosynthesis with preservation of the apparatus during the fixation period to simulate blockage were studied in the main groups. For comparison, sequential (comparison model 1 – CM-1) and combined (comparison model 2 – CM-2) use of transosseous and intramedullary osteosynthesis with dismantling of the apparatus at the end of distraction were modeled. The control was a regenerate formed according to the classical Ilizarov method. Radiographs were performed in dynamics, CT and morphological studies – at the end of the fixation period.Results. It was noted that regenerates of the same type in structure were formed in the EM-1 and CM-1 groups, as in the EM-2 and CM-2 groups. With successive methods, the spindle-shaped form of the regenerate prevailed, the formation of a pronounced periosteal component was noted. Powerful cortical plates, according to morphological studies, are formed from the periosteal and intermediate zones. With combined techniques, the cortical plates are formed thinner and predominantly from the periosteal component, the shape of the regenerate is closer to fusiform. In the comparison groups, the total time of surgical interventions was 25–50 % longer, in 50 % of cases there was a loss of length or deformation of the regenerate.Conclusions. The developed models of sequential and combined use of transosseous and intramedullary osteosynthesis for limb lengthening with preservation of fixation with an apparatus to simulate blocking have proven to be reliable in terms of fixation and easy to use on small laboratory animals.

Measurement of inclusive D*+- and associated dijet cross sections in photoproduction at HERA

Inclusive photoproduction of D*+- mesons has been measured for photon-proton centre-of-mass energies in the range 130 < W < 280 GeV and a photon virtuality Q^2 < 1 GeV^2. The data sample used corresponds to an integrated luminosity of 37 pb^-1. Total and differential cross sections as functions of the D* transverse momentum and pseudorapidity are presented in restricted kinematical regions and the data are compared with next-to-leading order (NLO) perturbative QCD calculations using the "massive charm" and "massless charm" schemes. The measured cross sections are generally above the NLO calculations, in particular in the forward (proton) direction. The large data sample also allows the study of dijet production associated with charm. A significant resolved as well as a direct photon component contribute to the cross section. Leading order QCD Monte Carlo calculations indicate that the resolved contribution arises from a significant charm component in the photon. A massive charm NLO parton level calculation yields lower cross sections compared to the measured results in a kinematic region where the resolved photon contribution is significant.Comment: 32 pages including 6 figure

Measurement of the ratio of branching fractions BR(B0 -> K*0 gamma)/BR(Bs0 -> phi gamma)

The ratio of branching fractions of the radiative B decays B0 -> K*0 gamma and Bs0 -> phi gamma has been measured using 0.37 fb-1 of pp collisions at a centre of mass energy of sqrt(s) = 7 TeV, collected by the LHCb experiment. The value obtained is BR(B0 -> K*0 gamma)/BR(Bs0 -> phi gamma) = 1.12 +/- 0.08 ^{+0.06}_{-0.04} ^{+0.09}_{-0.08}, where the first uncertainty is statistical, the second systematic and the third is associated to the ratio of fragmentation fractions fs/fd. Using the world average for BR(B0 -> K*0 gamma) = (4.33 +/- 0.15) x 10^{-5}, the branching fraction BR(Bs0 -> phi gamma) is measured to be (3.9 +/- 0.5) x 10^{-5}, which is the most precise measurement to date.Comment: 15 pages, 1 figure, 2 table

Opposite-side flavour tagging of B mesons at the LHCb experiment

The calibration and performance of the oppositeside flavour tagging algorithms used for the measurements of time-dependent asymmetries at the LHCb experiment are described. The algorithms have been developed using simulated events and optimized and calibrated with B + →J/ψK +, B0 →J/ψK ∗0 and B0 →D ∗− μ + νμ decay modes with 0.37 fb−1 of data collected in pp collisions at √ s = 7 TeV during the 2011 physics run. The oppositeside tagging power is determined in the B + → J/ψK + channel to be (2.10 ± 0.08 ± 0.24) %, where the first uncertainty is statistical and the second is systematic

Measurement of the CP-violating phase phi_s in the decay Bs->J/psi phi

We present a measurement of the time-dependent CP-violating asymmetry in B_s -> J/psi phi decays, using data collected with the LHCb detector at the LHC. The decay time distribution of B_s -> J/psi phi is characterized by the decay widths Gamma_H and Gamma_L of the heavy and light mass eigenstates of the B_s-B_s-bar system and by a CP-violating phase phi_s. In a sample of about 8500 B_s -> J/psi phi events isolated from 0.37 fb^-1 of pp collisions at sqrt(s)=7 TeV we measure phi_s = 0.15 +/- 0.18 (stat) +/- 0.06 (syst) rad. We also find an average B_s decay width Gamma_s == (Gamma_L + Gamma_H)/2 = 0.657 +/- 0.009 (stat) +/- 0.008 (syst) ps^-1 and a decay width difference Delta Gamma_s == Gamma_L - Gamma_H} = 0.123 +/- 0.029 (stat) +/- 0.011 (syst) ps^-1. Our measurement is insensitive to the transformation (phi_s,DeltaGamma_s --> pi - phi_s, - Delta Gamma_s.Comment: 9 pages, 3 figure

Observation of excited Lambda_b0 baryons

Using pp collision data corresponding to 1.0 fb-1 integrated luminosity collected by the LHCb detector, two narrow states are observed in the Lambda_b0pi+pi- spectrum with masses 5911.97 +- 0.12(stat) +- 0.02(syst) +- 0.66(Lambda_b0 mass) MeV/c^2 and 5919.77 +- 0.08(stat) +- 0.02(syst) +- 0.66(Lambda_b0 mass) MeV/c^2. The significances of the observations are 5.2 and 10.2 standard deviations, respectively. These states are interpreted as the orbitally-excited Lambda_b0 baryons, Lambda_b*0(5912) and Lambda_b*0(5920).Comment: Replaced by version published in Phys. Rev. Lett, modified fit with better mass resolution treatmen

Strong constraints on the rare decays Bs -> mu+ mu- and B0 -> mu+ mu-

A search for Bs -> mu+ mu- and B0 -> mu+ mu- decays is performed using 1.0 fb^-1 of pp collision data collected at \sqrt{s}=7 TeV with the LHCb experiment at the Large Hadron Collider. For both decays the number of observed events is consistent with expectation from background and Standard Model signal predictions. Upper limits on the branching fractions are determined to be BR(Bs -> mu+ mu-) mu+ mu-) < 1.0 (0.81) x 10^-9 at 95% (90%) confidence level.Comment: 2+6 pages; 4 figures; Accepted for publication in Physical Review Letter

Search for CP violation in D+→K−K+π+D^{+} \to K^{-}K^{+}\pi^{+} decays

A model-independent search for direct CP violation in the Cabibbo suppressed decay $D^+ \to K^- K^+\pi^+$ in a sample of approximately 370,000 decays is carried out. The data were collected by the LHCb experiment in 2010 and correspond to an integrated luminosity of 35 pb$^{-1}$. The normalized Dalitz plot distributions for $D^+$ and $D^-$ are compared using four different binning schemes that are sensitive to different manifestations of CP violation. No evidence for CP asymmetry is found.Comment: 13 pages, 8 figures, submitted to Phys. Rev.