Book Reviews

Click on the link to view

Health ManagementInformation Systems for Resource Allocation and Purchasing in Developing Countries

World Bank, Health Nutrition and Population, Discussion Paper: The paper begins with the premise that it is not possible to implement an efficient, modern RAP strategy today without the effective use of information technology. The paper then leads the architect through the functionality of the systems components and environment needed to support RAP, pausing to justify them at each step. The paper can be used as a long-term guide through the systems development process as it is not necessary (and likely not possible) to implement all functions at once. The paper’s intended audience is those members of a planning and strategy body, working in conjunction with technical experts, who are charged with designing and implementing a RAP strategy in a developing country

Effect of filtration on rolling-element-bearing life in contaminated lubricant environment

Fatigue tests were conducted on groups of 65 millimeter-bore ball bearings under four levels of filtration with and without a contaminated MIL-L-23699 lubricant. The baseline series used noncontaminated oil with 49 micron absolute filtration. In the remaining tests contaminants of the composition found in aircraft engine filters were injected into the filter's supply line at a constant rate of 125 milligrams per bearing-hour. The test filters had absolute particle removal ratings of 3, 30, 49, and 105 microns (0.45, 10, 30, and 70 microns nominal), respectively. Bearings were tested at 15,000 rpm under 4580 newtons radial load. Bearing life and running tract condition generally improved with finer filtration. The 3 and 30 micron filter bearings in a contaminated lubricant had statistically equivalent lives, approaching those from the baseline tests. The experimental lives of 49 micron bearings were approximately half the baseline bearing's lives. Bearings tested with the 105 micron filter experienced wear failures. The degree of surface distress, weight loss, and probable failure mode were found to be dependent on filtration level, with finer filtration being clearly beneficial

Is UV laser ablation a suitable tool for geochemical analysis of organic rich source materials?

Abstract not available

Potential of short wavelength laser ablation of organic materials

Although the literature contains several articles on UV laser ablation of synthetic polymers [1] and human tissue for surgical applications, to our knowledge there is no published record on organic geochemical applications for UV laser pyrolysis–gas chromatography–mass spectrometry (LA-GC-MS). In this study we have demonstrated the use of a 213 nm UV laser beam for ablating kerogens and organic rich rocks to liberate and analyse hydrocarbon signatures and compared the results against IR laser pyrolysis and traditional Py-GC-MS. It is possible to equate laser wavelength to electron volts where 1064 nm (IR) = 1.2 eV and 213 nm (UV) = 5.8 eV. Most chemical bonds have an energy between 2-4 eV and C-C bonds are ~3.6 eV. Organic materials can absorb radiation from a UV laser and chemical bonds can be cleaved cleanly by complex photochemical pathways by a single photon [2]. Ablation occurs with almost no heating of the sample and hence the term laser ablation instead of pyrolysis. Visible or IR lasers have insufficient energy to break bonds with a single photon this results in the heating of sample by the absobtion of energy into the vibrational modes of the molecule which can then result in pyrolysis. A solvent-extracted kerogen consisting mainly of higher plant material (Brownie Butte, Montanna, ~ 70 Ma) was used for initial experiments. A number of other samples have also been analysed. Laser ablation work was performed off-line in a static helium cell followed by solvent extraction of the laser cell. Separate analysis of the same samples using a more traditional flash pyrolysis approach was performed with a CDS pyroprobe and IR laser pyrolysis [3] for comparative purposes. As can be seen in Fig 1 UV laser ablation is able to liberate relatively high molecular weight fragments with no alkenes or other pyrolysis artefacts detected. SEM images of ablation pits indicate there is no obvious thermal alteration of the sample. The results of the pyrolysis techniques (on-line and IR laser pyrolysis) are similar and display a number of artefacts related to the pyrolysis process. Laser ablation of a number of samples has also shown that the distributions of biomarkers are comparable with the solvent extracts. Product yields although not quantified appear to be much higher than traditional pyrolysis technique

Tunable fibre-coupled multiphoton microscopy with a negative curvature fibre

Negative curvature fibre (NCF) guides light in its core by inhibiting the coupling of core and cladding modes. In this work, an NCF was designed and fabricated to transmit ultrashort optical pulses for multiphoton microscopy with low group velocity dispersion (GVD) at 800 nm. Its attenuation was measured to be <0.3 dB m(-1) over the range 600-850 nm and the GVD was -180 ± 70 fs(2)  m(-1) at 800 nm. Using an average fibre output power of ∼20 mW and pulse repetition rate of 80 MHz, the NCF enabled pulses with a duration of <200 fs to be transmitted through a length of 1.5 m of fibre over a tuning range of 180 nm without the need for dispersion compensation. In a 4 m fibre, temporal and spectral pulse widths were maintained to within 10% of low power values up to the maximum fibre output power achievable with the laser system used of 278 mW at 700 nm, 808 mW at 800 nm and 420 mW at 860 nm. When coupled to a multiphoton microscope, it enabled imaging of ex vivo tissue using excitation wavelengths from 740 nm to 860 nm without any need for adjustments to the set-up

Self-Assessment and Planned Change of Placement and Career Services Center

In the 1990s, college and university career services and placement units face many challenges which may influence their success including (a) increased budgetary constraints, (b) changing student demographics, (c) increased availability of computer technologies, (d) new service delivery models, and (e) changing employer recruitment practices. In an effort to address these issues and examine its role within the university (Roth, 1994), the Placement and Career Information Center (PCIC) at Central Michigan University undertook a program of applied research, self-assessment and planned change. The purpose of this article is to briefly report our experiences in conducting this program of applied research. The assessment strategy is presented in the first part of this report. Next, the methods used to collect data and assessment, sampling procedures and response rates are described. Following this, highlights of the assessment results are presented including a summary of some changes already made and those planned for the future. The results of this study are presented in detail in Adams, et at. (1994)

Modification of classical electron transport due to collisions between electrons and fast ions

A Fokker-Planck model for the interaction of fast ions with the thermal electrons in a quasi-neutral plasma is developed. When the fast ion population has a net flux (i.e. the distribution of the fast ions is anisotropic in velocity space) the electron distribution function is significantly perturbed from Maxwellian by collisions with the fast ions, even if the fast ion density is orders of magnitude smaller than the electron density. The Fokker-Planck model is used to derive classical electron transport equations (a generalized Ohm's law and a heat flow equation) that include the effects of the electron-fast ion collisions. It is found that these collisions result in a current term in the transport equations which can be significant even when total current is zero. The new transport equations are analyzed in the context of a number of scenarios including $\alpha$ particle heating in ICF and MIF plasmas and ion beam heating of dense plasmas