A Cross-correlation method to search for gravitational wave bursts with AURIGA and Virgo

We present a method to search for transient GWs using a network of detectors with different spectral and directional sensitivities: the interferometer Virgo and the bar detector AURIGA. The data analysis method is based on the measurements of the correlated energy in the network by means of a weighted cross-correlation. To limit the computational load, this coherent analysis step is performed around time-frequency coincident triggers selected by an excess power event trigger generator tuned at low thresholds. The final selection of GW candidates is performed by a combined cut on the correlated energy and on the significance as measured by the event trigger generator. The method has been tested on one day of data of AURIGA and Virgo during September 2005. The outcomes are compared to the results of a stand-alone time-frequency coincidence search. We discuss the advantages and the limits of this approach, in view of a possible future joint search between AURIGA and one interferometric detector.Comment: 11 pages, 6 figures, submitted to CQG special issue for Amaldi 7 Proceeding

The variable finesse locking technique

Virgo is a power recycled Michelson interferometer, with 3 km long Fabry-Perot cavities in the arms. The locking of the interferometer has been obtained with an original lock acquisition technique. The main idea is to lock the instrument away from its working point. Lock is obtained by misaligning the power recycling mirror and detuning the Michelson from the dark fringe. In this way, a good fraction of light escapes through the antisymmetric port and the power build-up inside the recycling cavity is extremely low. The benefit is that all the degrees of freedom are controlled when they are almost decoupled, and the linewidth of the recycling cavity is large. The interferometer is then adiabatically brought on to the dark fringe. This technique is referred to as variable finesse, since the recycling cavity is considered as a variable finesse Fabry-Perot. This technique has been widely tested and allows us to reach the dark fringe in few minutes, in an essentially deterministic way

Astrophysically Triggered Searches for Gravitational Waves: Status and Prospects

In gravitational-wave detection, special emphasis is put onto searches that focus on cosmic events detected by other types of astrophysical observatories. The astrophysical triggers, e.g. from gamma-ray and X-ray satellites, optical telescopes and neutrino observatories, provide a trigger time for analyzing gravitational wave data coincident with the event. In certain cases the expected frequency range, source energetics, directional and progenitor information is also available. Beyond allowing the recognition of gravitational waveforms with amplitudes closer to the noise floor of the detector, these triggered searches should also lead to rich science results even before the onset of Advanced LIGO. In this paper we provide a broad review of LIGO's astrophysically triggered searches and the sources they target

Length Sensing and Control in the Virgo Gravitational Wave Interferometer

The gravitational wave detector Virgo is presently being commissioned. A significant part of last year was spent in setting up the cavity length control system. This work was carried out with steps of increasing complexity: locking a simple Fabry-Perot cavity, then a Michelson interferometer with Fabry-Perot cavities in both arms, and finally recycling the light beam into the interferometer. The applied strategy and the main results obtained are describe

Status of coalescing binaries search activities in Virgo

The interferometric gravitational wave detector Virgo is undergoing an advanced phase of its commissioning, during which short runs are routinely performed, in which data are analyzed online and offline, searching for signals from coalescing binary systems. In this report we present the progress of the coalescing binaries search activities in Virgo, and we describe details of the detection pipeline including hardware injections, vetoes, and parameter estimation, using recent data taking

Interferometric detectors of gravitational waves on Earth: the next generations

International audienceThe interferometric detectors of gravitational waves of first generation are now taking data. A first detection might be possible with these instruments, but more sensitive detectors will be needed to start the gravitational wave astronomy. The interferometers of second generation will improve the sensitivity by a factor ten, allowing to explore a universe volume 1000 times larger. The technology is almost ready and the construction will start at the beginning of next decade. The community of the physicists involved in the field has also started to make plans for third generation detectors, for which a long term technology development will be required. The plans for the upgrades of the existing detectors and the scenario for the evolution of the field will be reviewed in this paper

LIGO and VIRGO: large interferometers searching for gravitational waves

International audienceThe largest interferometric detectors for gravitational waves, LIGO and Virgo, have reached (or are close to) the design sensitivity and have started taking science data. The operation of such detectors is reviewed and the expected sources and detection rates are discussed. LIGO and Virgo might make the first detection, but more advanced detectors will be needed to truly open the field of gravitational wave astronomy: the current ideas and plans for the upgrades of the existing interferometers are presented

Data Acquisition System of the Virgo Gravitational Waves Interferometric Detector

International audienceVirgo is an experiment aiming at the detection of gravitational waves emitted by astrophysical sources. Its detector, based on a 3km arms interferometer, is a complex setup which requires several digital control loops running up to 10kHz, an accurate and reliable central timing system and an efficient data acquisition, all of them being distributed over 3km. We overview here the main hardware and software components developed for the data acquisition system (DAQ) and its current architecture. Then, we briefly discuss its connections with interferometer's controls, especially through the automation of the interferometer's startup procedure. Then, we describe the tools used to monitor the DAQ and the performances we measured with them. Finally, are described also the tools developped for the online detector monitoring, mandatory complement of the DAQ for the commissioning of the Virgo detector

Noise budget and noise hunting in VIRGO

International audienc

The status of VIRGO

In this paper the main characteristics of the interferometric gravitational waves detector Virgo are presented as well as its present status and perspectives