NUTRIENTS IN RUNOFF FOLLOWING THE APPLICATION OF SWINE MANURE TO INTERRILL AREAS

The P content of swine manure can be reduced through the addition of feed supplements or the use of selected corn hybrids. This study was conducted to compare interrill runoff losses of P and N from three soils following the application of swine manure obtained from selected diets. The soils used in this investigation included a Hersh sandy loam, Pierre silty clay, and Sharpsburg silt loam. Simulated rainfall was applied during both initial and wet runs to a soil pan on which swine manure produced from low phytate corn (LPC), phytase added to the diet (PHY), or a traditional corn diet (TCD) was added. Additional experimental treatments included inorganic fertilizer and an untreated check. For the initial rainfall simulation run, concentrations of dissolved P, bioavailable P, and Total P were greater for the fertilizer treatment than any of the manure treatments. Use of manure from a LPC diet generally did not result in a reduction in N and P concentrations in runoff when compared with the TCD. Concentrations and total amounts of nutrients transported in runoff were affected by soil type. Changing the TCD to LPC and PHY diets to reduce the P content of manure did not significantly affect the total amounts of DP, BAP, or Total P transported in runoff, when simulated rainfall was applied soon after manure application

Crop Nitrogen and Phosphorus Utilization following Application of Slurry from Swine Fed Traditional or Low Phytate Corn Diets

Field application of swine (Sus scrofa) slurry provides essential nutrients for crop production. The N to P ratio for slurry is lower than needed by most crops resulting in P accumulation when applied at N rates required for crop growth. Low phytate corn (Zea mays L.) (LPC) contains similar amounts of total P but less phytate P than traditional corn (TC) resulting in improved P bioavailability and reduced P excretion by monogastric animals. While manure from swine-fed LPC diets has a higher N to P ratio than that from TC diets, field studies comparing crop utilization of nutrients from LPC manure have not been conducted. A field study was conducted to compare N and P utilization by no-tillage rainfed sorghum [Sorghum bicolor (L.) Moench.] receiving three annual surface applications of nutrients (inorganic fertilizer, LPC slurry, and TC slurry) and by irrigated corn receiving one incorporated application of nutrients. Sorghum grain and total dry matter N utilization exhibited a year by treatment interaction but total dry matter N utilization was similar for both manure types in all years (61.2 ± 2.6% for TC and 53.8 ± 2.6% for LPC). Grain P utilization was similar for inorganic fertilizer and manure but differed among years (44.4 ± 7.0% in 1999, 25.1 ± 1.4% in 2000, and 57.0 ± 2.2% in 2001). Corn grain N and P utilization did not diff er among nutrient sources in the year of application (50.7 ± 2.4% for N and 40.4 ± 3.0 for P) and increased little in the year following application (62.2 ± 3.0% for N and 50.2 ± 4.5% for P). Crop N and P utilization from LPC manure and TC manure was similar and nutrient guidelines developed for TC swine slurry should also apply for LPC slurry

The environment effect on operation of in-vessel mirrors for plasma diagnostics in fusion devices

First mirrors will be the plasma facing components of optical diagnostic systems in ITER. Mirror surfaces will undergo modification caused by erosion and re-deposition processes [1,2]. As a consequence, the mirror performance may be changed and may deteriorate [3,4]. In the divertor region it may also be obscured by deposition [5-7]. The limited access to in-vessel components of ITER calls for testing the mirror materials in present day devices in order to gather information on the material damage and degradation of the mirror performance, i.e. reflectivity. A dedicated experimental programme, First Mirror Test (FMT), has been initiated at the JET tokamak within the framework Tritium Retention Studies (TRS).Comment: 12th International Congress on Plasma Physics, 25-29 October 2004, Nice (France).Submitted by B. Schunke on behalf of V. Voytseny

Limiter lock systems at TEXTOR: flexible tools for plasma-wall investigation

Limiter lock systems on the top and the bottom of the TEXTOR vessel are essential elements for experimental investigations of plasma-wall interaction in a tokamak. The lock systems are designed as user facilities that allow the insertion of wall elements (limiter) and tools for diagnostic (electrical probes, gas injection) without breaking the TEXTOR vacuum. The specially designed holder on top of the central carrier and a powerful vacuum pump system permit the exchange of components within similar to1 h. Up to ten electrical signals, four thermocouples, and a gas supply can be connected at the holder interface. Between discharges, the inserted component can be positioned radially and turned with respect to the toroidal magnetic field. Additionally, the central carrier is electrically isolated to apply bias voltages and currents up to 1 kV and 1 kA, respectively.An important feature of the lock system is the good access for optical spectroscopic observation of the inserted components in the vicinity of the edge plasma. The whole spectrum from ultraviolet to infrared is covered by spectrometers and filters combined with cameras. Toroidally and poloidally resolved measurements are obtained front the view on top of the probes while the tangential poloidal view delivers radially and toroidally resolved information.A programmable logic controller (Simatic S5) that is operated inside the TEXTOR bunker and from remote locations outside the concrete wall drives all possible features of the lock system

Arctic stratospheric dehydration – Part 2: Microphysical modeling

Large areas of synoptic-scale ice PSCs (polar stratospheric clouds) distinguished the Arctic winter 2009/2010 from other years and revealed unprecedented evidence of water redistribution in the stratosphere. A unique snapshot of water vapor repartitioning into ice particles was obtained under extremely cold Arctic conditions with temperatures around 183 K. Balloon-borne, aircraft and satellite-based measurements suggest that synoptic-scale ice PSCs and concurrent reductions and enhancements in water vapor are tightly linked with the observed de- and rehydration signatures, respectively. In a companion paper (Part 1), water vapor and aerosol backscatter measurements from the RECONCILE (Reconciliation of essential process parameters for an enhanced predictability of Arctic stratospheric ozone loss and its climate interactions) and LAPBIAT-II (Lapland Atmosphere–Biosphere Facility) field campaigns have been analyzed in detail. This paper uses a column version of the Zurich Optical and Microphysical box Model (ZOMM) including newly developed NAT (nitric acid trihydrate) and ice nucleation parameterizations. Particle sedimentation is calculated in order to simulate the vertical redistribution of chemical species such as water and nitric acid. Despite limitations given by wind shear and uncertainties in the initial water vapor profile, the column modeling unequivocally shows that (1) accounting for small-scale temperature fluctuations along the trajectories is essential in order to reach agreement between simulated optical cloud properties and observations, and (2) the use of recently developed heterogeneous ice nucleation parameterizations allows the reproduction of the observed signatures of de- and rehydration. Conversely, the vertical redistribution of water measured cannot be explained in terms of homogeneous nucleation of ice clouds, whose particle radii remain too small to cause significant dehydration

Temporal evolution of stable water isotopologues in cloud droplets in a hill cap cloud in central Europe (HCCT-2010)

In this work, we present the first study resolving the temporal evolution of δ2H and δ18O values in cloud droplets during 13 different cloud events. The cloud events were probed on a 937 m high mountain chain in Germany in the framework of the Hill Cap Cloud Thuringia 2010 campaign (HCCT-2010) in September and October 2010. The δ values of cloud droplets ranged from −77‰ to −15‰ (δ2H) and from −12.1‰ to −3.9‰ (δ18O) over the whole campaign. The cloud water line of the measured δ values was δ2H=7.8×δ18O+13×10−3, which is of similar slope, but with higher deuterium excess than other Central European Meteoric Water Lines. Decreasing δ values in the course of the campaign agree with seasonal trends observed in rain in central Europe. The deuterium excess was higher in clouds developing after recent precipitation revealing episodes of regional moisture recycling. The variations in δ values during one cloud event could either result from changes in meteorological conditions during condensation or from variations in the δ values of the water vapor feeding the cloud. To test which of both aspects dominated during the investigated cloud events, we modeled the variation in δ values in cloud water using a closed box model. We could show that the variation in δ values of two cloud events was mainly due to changes in local temperature conditions. For the other eleven cloud events, the variation was most likely caused by changes in the isotopic composition of the advected and entrained vapor. Frontal passages during two of the latter cloud events led to the strongest temporal changes in both δ2H (≈ 6‰ per hour) and δ18O (≈ 0.6‰ per hour). Moreover, a detailed trajectory analysis for the two longest cloud events revealed that variations in the entrained vapor were most likely related to rain out or changes in relative humidity and temperature at the moisture source region or both. This study illustrates the sensitivity of stable isotope composition of cloud water to changes in large scale air mass properties and regional recycling of moisture

Stable water isotopologue ratios in fog and cloud droplets of liquid clouds are not size-dependent

In this work, we present the first observations of stable water isotopologue ratios in cloud droplets of different sizes collected simultaneously. We address the question whether the isotope ratio of droplets in a liquid cloud varies as a function of droplet size. Samples were collected from a ground intercepted cloud (= fog) during the Hill Cap Cloud Thuringia 2010 campaign (HCCT-2010) using a three-stage Caltech Active Strand Cloud water Collector (CASCC). An instrument test revealed that no artificial isotopic fractionation occurs during sample collection with the CASCC. Furthermore, we could experimentally confirm the hypothesis that the δ values of cloud droplets of the relevant droplet sizes (μm-range) were not significantly different and thus can be assumed to be in isotopic equilibrium immediately with the surrounding water vapor. However, during the dissolution period of the cloud, when the supersaturation inside the cloud decreased and the cloud began to clear, differences in isotope ratios of the different droplet sizes tended to be larger. This is likely to result from the cloud's heterogeneity, implying that larger and smaller cloud droplets have been collected at different moments in time, delivering isotope ratios from different collection times

Identification of classical swine fever virus protein E2 as a target for cytotoxic T cells by using mRNA-transfected antigen-presenting cells

Vaccination of pigs against Classical swine fever virus (CSFV) by using live-virus vaccines induces early protection before detectable humoral immune responses. Immunological analyses indicate that this is associated with T-cell activation, underlining the importance of targeting cytotoxic T-lymphocyte (CTL) responses for vaccine improvement. Antigen-presenting cells (APCs) transfected with mRNA encoding structural protein E2 or non-structural viral proteins NS3¿NS4A were used to identify viral genes encoding CTL epitopes. Monocyte-derived dendritic cells (DCs) and fibrocytes served as the APCs. In vitro translation of the mRNA and microscopic analysis of transfected cells demonstrated that E2 and NS3¿NS4A could be identified. APCs transfected with either of the mRNA molecules restimulated CSFV-specific T cells to produce gamma interferon and specific cytotoxic activity against CSFV-infected target cells. The presence of CTL epitopes on E2 was confirmed by using d/d-haplotype MAX cells expressing E2 constitutively as target cells in d/d-haplotype CTL assays. A potent CTL activity against E2 was detected early (1¿3 weeks) after CSFV challenge. This work corroborates the existence of CTL epitopes within the non-structural protein domain NS3¿NS4A of CSFV. Furthermore, epitopes on the E2 protein can also now be classified as targets for CTLs, having important implications for vaccine design, especially subunit vaccines. As for the use of mRNA-transfected APCs, this represents a simple and efficient method to identify viral genes encoding CTL epitopes in outbred population

Ground-based and airborne in-situ measurements of the Eyjafjallajökull volcanic aerosol plume in Switzerland in spring 2010

The volcanic aerosol plume resulting from the Eyjafjallajökull eruption in Iceland in April and May 2010 was detected in clear layers above Switzerland during two periods (17–19 April 2010 and 16–19 May 2010). In-situ measurements of the airborne volcanic plume were performed both within ground-based monitoring networks and with a research aircraft up to an altitude of 6000 m a.s.l. The wide range of aerosol and gas phase parameters studied at the high altitude research station Jungfraujoch (3580 m a.s.l.) allowed for an in-depth characterization of the detected volcanic aerosol. Both the data from the Jungfraujoch and the aircraft vertical profiles showed a consistent volcanic ash mode in the aerosol volume size distribution with a mean optical diameter around 3 ± 0.3 μm. These particles were found to have an average chemical composition very similar to the trachyandesite-like composition of rock samples collected near the volcano. Furthermore, chemical processing of volcanic sulfur dioxide into sulfate clearly contributed to the accumulation mode of the aerosol at the Jungfraujoch. The combination of these in-situ data and plume dispersion modeling results showed that a significant portion of the first volcanic aerosol plume reaching Switzerland on 17 April 2010 did not reach the Jungfraujoch directly, but was first dispersed and diluted in the planetary boundary layer. The maximum PM<sub>10</sub> mass concentrations at the Jungfraujoch reached 30 μgm<sup>−3</sup> and 70 μgm<sup>−3</sup> (for 10-min mean values) duri ng the April and May episode, respectively. Even low-altitude monitoring stations registered up to 45 μgm<sup>−3</sup> of volcanic ash related PM<sub>10</sub> (Basel, Northwestern Switzerland, 18/19 April 2010). The flights with the research aircraft on 17 April 2010 showed one order of magnitude higher number concentrations over the northern Swiss plateau compared to the Jungfraujoch, and a mass concentration of 320 (200–520) μgm<sup>−3</sup> on 18 May 2010 over the northwestern Swiss plateau. The presented data significantly contributed to the time-critical assessment of the local ash layer properties during the initial eruption phase. Furthermore, dispersion models benefited from the detailed information on the volcanic aerosol size distribution and its chemical composition