Thermal conductivity of zirconia thermal barrier coatings

Thermal barrier coatings (TBC's) applied to the hot gas components of turbine engines lead to enhanced fuel efficiency and component reliability. Understanding the mechanisms which control the thermal transport behavior of the TBC's is of primary importance. Physical vapor description (PVD) and plasma spraying (PS) are the two most commonly used coating techniques. These techniques produce coatings with unique microstructures which control their performance and stability. The PS coatings were applied with either standard power or hollow sphere particles. The hollow sphere particles yielded a lower density and lower thermal conductivity coating. The thermal conductivity of both fully and partially stabilized zirconia, before and after thermal aging, will be compared. The thermal conductivity of the coatings permanently increase upon being exposed to high temperatures. These increases are attributed to microstructural changes within the coatings. Sintering of the as fabricated plasma sprayed lamellar structure is observed by scanning electron microscopy of coatings isothermally heat treated at temperatures greater than 1100 C. During this sintering process the planar porosity between lamella is converted to a series of small spherical pores. The change in pore morphology is the primary reason for the observed increase in thermal conductivity. This increase in thermal conductivity can be modeled using a relationship which depends on both the temperature and time of exposure. Although the PVD coatings are less susceptible to thermal aging effects, preliminary results suggest that they have a higher thermal conductivity than PS coatings, both before and after thermal aging. The increases in thermal conductivity due to thermal aging for partially stabilized plasma sprayed zirconia have been found to be less than for fully stabilized plasma sprayed zirconia coatings. The high temperature thermal diffusivity data indicates that if these coatings reach a temperature above 1100 C during operation, they will begin to lose their effectiveness as a thermal barrier

Multiple station thermal diffusivity instrument

A multiple furnace laser flash thermal diffusivity system has been developed. The system is equipped with a movable Nd:Glass laser unit, two IR detectors and furnaces for precise measurements of thermal diffusivity over the temperature range from {minus}150{degree}C to 2500{degree}C. All furnaces can operate in vacuum and inert gas; the environmental effects furnace also supports oxidizing and reducing environments. To increase testing speed the graphite and aluminum furnaces are both equipped with six-sample carousels. Thermal diffusivity measurements of three standard reference materials show excellent results over the entire temperature range

Heat transfer between a nano-tip and a surface

We study quasi-ballistic heat transfer through air between a hot nanometer-scale tip and a sample. The hot tip/surface configuration is widely used to perform nonintrusive confined heating. Using a Monte-Carlo simulation, we find that the thermal conductance reaches 0.8 MW.m-2K-1 on the surface under the tip and show the shape of the heat flux density distribution (nanometer-scale thermal spot). These results show that a surface can be efficiently heated locally without contact. The temporal resolution of the heat transfer is a few tens of picoseconds.Comment: 4 page

Assessment of Computer Simulation Software and Process Data for High Pressure Die Casting of Magnesium

Computer software for the numerical simulation of solidification and mold filling is an effective design tool for cast structural automotive magnesium components. A review of commercial software capabilities and their validation procedures was conducted. Aside form the software assessment, the program addressed five main areas: lubricant degradation, lubricant application, gate atomization, and heat transfer at metal mold interfaces. A test stand for lubricant application was designed. A sensor was used for the direct measurement of heat fluxes during lubricant application and casting solidification in graphite molds. Spray experiments were conducted using pure deionized water and commercial die lubricants. The results show that the sensor can be used with confidence for measuring heat fluxes under conditions specific to the die lube application. The data on heat flux was presented in forms suitable for use in HPDC simulation software. Severe jet breakup and atomization phenomena are likely to occur due to high gate velocities in HPDC. As a result of gate atomization, droplet flow affects the mold filling pattern, air entrapment, skin formation, and ensuing defects. Warm water analogue dies were designed for obtaining experimental data on mold filling phenomena. Data on break-up jet length, break-up pattern, velocities, and droplet size distribution were obtained experimentally and was used to develop correlations for jet break-up phenomena specific to die casting gate configurations

No straight lines – young women’s perceptions of their mental health and wellbeing during and after pregnancy: a systematic review and meta-ethnography

Background: Young mothers face mental health challenges during and after pregnancy including increased rates of depression compared to older mothers. While the prevention of teenage pregnancy in countries such as the United States and the United Kingdom has been a focus for policy and research in recent decades, the need to understand young women’s own experiences has been highlighted. The aim of this meta-ethnography was to examine young women’s perceptions of their mental health and wellbeing during and after pregnancy to provide new understandings of those experiences. Methods: A systematic review and meta-ethnographic synthesis of qualitative research was conducted. Seven databases were systematically searched and forward and backward searching conducted. Papers were included if they were from Organisation for Economic Co-operation and Development countries and explored mental health and wellbeing experiences of young mothers (age under 20 in pregnancy; under 25 at time of research) as a primary research question – or where evidence about mental health and wellbeing from participants was foregrounded. Nineteen papers were identified and the Critical Appraisal Skills Programme checklist for qualitative research used to appraise the evidence. Following the seven-step process of meta-ethnography, key constructs were examined within each study and then translated into one another. Results: Seven translated themes were identified forming a new line of argument wherein mental health and wellbeing was analysed as relating to individual bodily experiences; tied into past and present relationships; underpinned by economic insecurity and entangled with feelings of societal surveillance. There were ‘no straight lines’ in young women’s experiences, which were more complex than dominant narratives around overcoming adversity suggest. Conclusions: The synthesis concludes that health and social care professionals need to reflect on the operation of power and stigma in young women’s lives and its impact on wellbeing. It adds to understanding of young women’s mental health and wellbeing during and after pregnancy as located in physical and structural factors rather than individual capacities alone

Mars as a "natural laboratory" for studying surface activity on a range of planetary bodies

n/

Weight management during teenage pregnancy: Issues to consider when developing appropriate support

Teenage pregnancy is more prevalent in areas of high obesity, compared to areas where obesity levels are low. Risks associated with maternal obesity in pregnant teenagers include pre-eclampsia and caesarean delivery. To reduce these risks, pregnant teenagers need to be supported to gain a healthy weight in pregnancy. This includes encouraging these women to eat healthily through providing appropriate information including online or smartphone apps in conjunction with face-to-face support. These young women also need encouragement to be physically active. This support must be tailored to the teenage population considering their specific barriers and facilitators to behaviour change. Midwives with the aid of a multidisciplinary team play a key role in encouraging these healthy behaviours

Investigating the influence of African American and African Caribbean race on primary care doctors' decision making about depression

This paper explores differences in how primary care doctors process the clinical presentation of depression by African American and African-Caribbean patients compared with white patients in the US and the UK. The aim is to gain a better understanding of possible pathways by which racial disparities arise in depression care. One hundred and eight doctors described their thought processes after viewing video recorded simulated patients presenting with identical symptoms strongly suggestive of depression. These descriptions were analysed using the CliniClass system, which captures information about micro-components of clinical decision making and permits a systematic, structured and detailed analysis of how doctors arrive at diagnostic, intervention and management decisions. Video recordings of actors portraying black (both African American and African-Caribbean) and white (both White American and White British) male and female patients (aged 55 years and 75 years) were presented to doctors randomly selected from the Massachusetts Medical Society list and from Surrey/South West London and West Midlands National Health Service lists, stratified by country (US v.UK), gender, and years of clinical experience (less v. very experienced). Findings demonstrated little evidence of bias affecting doctors' decision making processes, with the exception of less attention being paid to the potential outcomes associated with different treatment options for African American compared with White American patients in the US. Instead, findings suggest greater clinical uncertainty in diagnosing depression amongst black compared with white patients, particularly in the UK. This was evident in more potential diagnoses. There was also a tendency for doctors in both countries to focus more on black patients' physical rather than psychological symptoms and to identify endocrine problems, most often diabetes, as a presenting complaint for them. This suggests that doctors in both countries have a less well developed mental model of depression for black compared with white patients

The surfactant protein C mutation A116D alters cellular processing, stress tolerance, surfactant lipid composition, and immune cell activation

<p>Abstract</p> <p>Background</p> <p>Surfactant protein C (SP-C) is important for the function of pulmonary surfactant. Heterozygous mutations in <it>SFTPC</it>, the gene encoding SP-C, cause sporadic and familial interstitial lung disease (ILD) in children and adults. Mutations mapping to the BRICHOS domain located within the SP-C proprotein result in perinuclear aggregation of the proprotein. In this study, we investigated the effects of the mutation A116D in the BRICHOS domain of SP-C on cellular homeostasis. We also evaluated the ability of drugs currently used in ILD therapy to counteract these effects.</p> <p>Methods</p> <p>SP-C^A116Dwas expressed in MLE-12 alveolar epithelial cells. We assessed in vitro the consequences for cellular homeostasis, immune response and effects of azathioprine, hydroxychloroquine, methylprednisolone and cyclophosphamide.</p> <p>Results</p> <p>Stable expression of SP-C^A116Din MLE-12 alveolar epithelial cells resulted in increased intracellular accumulation of proSP-C processing intermediates. SP-C^A116Dexpression further led to reduced cell viability and increased levels of the chaperones Hsp90, Hsp70, calreticulin and calnexin. Lipid analysis revealed decreased intracellular levels of phosphatidylcholine (PC) and increased lyso-PC levels. Treatment with methylprednisolone or hydroxychloroquine partially restored these lipid alterations. Furthermore, SP-C^A116Dcells secreted soluble factors into the medium that modulated surface expression of CCR2 or CXCR1 receptors on CD4⁺lymphocytes and neutrophils, suggesting a direct paracrine effect of SP-C^A116Don neighboring cells in the alveolar space.</p> <p>Conclusions</p> <p>We show that the A116D mutation leads to impaired processing of proSP-C in alveolar epithelial cells, alters cell viability and lipid composition, and also activates cells of the immune system. In addition, we show that some of the effects of the mutation on cellular homeostasis can be antagonized by application of pharmaceuticals commonly applied in ILD therapy. Our findings shed new light on the pathomechanisms underlying SP-C deficiency associated ILD and provide insight into the mechanisms by which drugs currently used in ILD therapy act.</p