632 research outputs found

    Implementation and Validation of 3-D Ice Accretion Measurement Methodology

    Get PDF
    A research program has been implemented to develop and validate the use of a commercial 3-D laser scanning system to record ice accretion geometry in the NASA Icing Research Tunnel. A main component of the program was the geometric assessment of the 3- D laser scanning system on a 2-D (straight wing) and a 3-D (swept wing) airfoil geometries. This exercise consisted of comparison of scanned ice accretion to castings of the same ice accretion. The scan data were also used to create rapid prototype artificial ice shapes that were scanned and compared to the original ice accretion. The results from geometric comparisons on the straight wing showed that the ice shape models generated through the scan/rapid prototype process compared reasonably well with the cast shapes. Similar results were obtained with the geometric comparisons on the swept wing. It was difficult to precisely compare the scans of the cast shapes to the original ice accretion scans because the cast shapes appear to have shrunk during the mold/casting process by as much as 0.10-inch. However the comparison of the local ice-shape features were possible and produced better results. The rapid prototype manufacturing process was shown to reproduce the original ice accretion scan normally within 0.01-inch

    Generic flow profiles induced by a beating cilium

    Full text link
    We describe a multipole expansion for the low Reynolds number fluid flows generated by a localized source embedded in a plane with a no-slip boundary condition. It contains 3 independent terms that fall quadratically with the distance and 6 terms that fall with the third power. Within this framework we discuss the flows induced by a beating cilium described in different ways: a small particle circling on an elliptical trajectory, a thin rod and a general ciliary beating pattern. We identify the flow modes present based on the symmetry properties of the ciliary beat.Comment: 12 pages, 6 figures, to appear in EPJ

    Persistent homology to analyse 3D faces and assess body weight gain

    Get PDF
    In this paper, we analyse patterns in face shape variation due to weight gain. We propose the use of persistent homology descriptors to get geometric and topological information about the configuration of anthropometric 3D face landmarks. In this way, evaluating face changes boils down to comparing the descriptors computed on 3D face scans taken at different times. By applying dimensionality reduction techniques to the dissimilarity matrix of descriptors, we get a space in which each face is a point and face shape variations are encoded as trajectories in that space. Our results show that persistent homology is able to identify features which are well related to overweight and may help assessing individual weight trends. The research was carried out in the context of the European project SEMEOTICONS, which developed a multisensory platform which detects and monitors over time facial signs of cardio-metabolic risk

    Effect of eplerenone on parathyroid hormone levels in patients with primary hyperparathyroidism: a randomized, double-blind, placebo-controlled trial

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>Increasing evidence suggests the bidirectional interplay between parathyroid hormone and aldosterone as an important mechanism behind the increased risk of cardiovascular damage and bone disease observed in primary hyperparathyroidism. Our primary object is to assess the efficacy of the mineralocorticoid receptor-blocker eplerenone to reduce parathyroid hormone secretion in patients with parathyroid hormone excess.</p> <p>Methods/design</p> <p>Overall, 110 adult male and female patients with primary hyperparathyroidism will be randomly assigned to eplerenone (25 mg once daily for 4 weeks and 4 weeks with 50 mg once daily after dose titration] or placebo, over eight weeks. Each participant will undergo detailed clinical assessment, including anthropometric evaluation, 24-h ambulatory arterial blood pressure monitoring, echocardiography, kidney function and detailed laboratory determination of biomarkers of bone metabolism and cardiovascular disease.</p> <p>The study comprises the following exploratory endpoints: mean change from baseline to week eight in (1) parathyroid hormone(1–84) as the primary endpoint and (2) 24-h systolic and diastolic ambulatory blood pressure levels, NT-pro-BNP, biomarkers of bone metabolism, 24-h urinary protein/albumin excretion and echocardiographic parameters reflecting systolic and diastolic function as well as cardiac dimensions, as secondary endpoints.</p> <p>Discussion</p> <p>In view of the reciprocal interaction between aldosterone and parathyroid hormone and the potentially ensuing target organ damage, the EPATH trial is designed to determine whether eplerenone, compared to placebo, will effectively impact on parathyroid hormone secretion and improve cardiovascular, renal and bone health in patients with primary hyperparathyroidism.</p> <p>Trial registration</p> <p>ISRCTN33941607</p

    Surface and interface investigation of a 15th century wall painting using Multispectral Imaging and Pulse-Compression Infrared Thermography

    Get PDF
    Before starting the restoration of an artwork, good practice involves the evaluation of the item healthiness possibly carried out through non-invasive techniques. In the specific case of painting inspection, hyper- and multi- spectral techniques are commonly used to analyze the outer layers (varnish, pictorial, and drawing), while X-ray, tomography, and many others can be employed to investigate its inner structure. Although highly desirable, a single technique providing all the information about a painting is still not available. Thus, it is of great interest to define the analysis’ protocols that could optimally exploit the complementarities of a minimal set of techniques. To this aim, the present paper shows the combined use of the hypercolorimetric multispectral imaging and pulse-compression thermography on a 15th century wall painting attributed to the Italian artist Antonio del Massaro, also known as Pastura, representing the Madonna with the Child and the Saints Jerome and Francis. The capabilities and the complementarities of the two techniques, whose information can also be fused through post-processing, are illustrated in detail in this paper. In addition, a false-colour imaging approach is proposed to improve the readability and analysis of the thermography results

    Describing astronomy identity of upper primary and middle school students through structural equation modeling

    Get PDF
    We describe how young students situate themselves with respect to astronomy through an identity framework that features four dimensions: interest, utility value, confidence, and conceptual knowledge. Overall, about 900 Italian students, from 5th to 9th grade (9-14 years old), were involved in the study. We tested our model using confirmatory factor analysis and structural equation modeling. Differences between girls and boys and across school levels were also investigated. Results show that interest has both a direct and an indirect effect on astronomy identity. The indirect effect of interest on identity is mediated by utility value. Moreover, confidence mediates the effect of interest on conceptual knowledge. Concerning differences between girls and boys, we found that the effect of interest on identity is greater for girls than for boys and that the utility value mediates the effect of interest on identity for boys but not for girls. Finally, our findings show also that the students' interest in astronomy and confidence in their performance decrease with age, with a potential negative impact on conceptual knowledge and future career choice in astronomy. The astronomy identity framework can be employed to examine the role of affective variables on performance and persistence in astronomy and to improve the design of teaching-learning activities that can potentially stimulate a lasting interest in astronomy

    Monitoring guidance for patients with hypophosphatasia treated with asfotase alfa.

    Get PDF
    Hypophosphatasia (HPP) is a rare, inherited, systemic, metabolic disorder caused by autosomal recessive mutations or a single dominant-negative mutation in the gene encoding tissue-nonspecific alkaline phosphatase (TNSALP). The disease is associated with a broad range of signs, symptoms, and complications, including impaired skeletal mineralization, altered calcium and phosphate metabolism, recurrent fractures, pain, respiratory problems, impaired growth and mobility, premature tooth loss, developmental delay, and seizures. Asfotase alfa is a human, recombinant enzyme replacement therapy that is approved in many countries for the treatment of patients with HPP. To address the unmet need for guidance in the monitoring of patients receiving asfotase alfa, an international panel of physicians with experience in diagnosing and managing HPP convened in May 2016 to discuss treatment monitoring parameters. The panel discussions focused on recommendations for assessing and monitoring patients after the decision to treat with asfotase alfa had been made and did not include recommendations for whom to treat. Based on the consensus of panel members, this review provides guidance on the monitoring of patients with HPP during treatment with asfotase alfa, including recommendations for laboratory, efficacy, and safety assessments and the frequency with which these should be performed during the course of treatment. Recommended assessments are based on patient age and include regular monitoring of biochemistry, skeletal radiographs, respiratory function, growth, pain, mobility and motor function, and quality of life. Because of the systemic presentation of HPP, a coordinated, multidisciplinary, team-based, patient-focused approach is recommended in the management of patients receiving asfotase alfa. Monitoring of efficacy and safety outcomes must be tailored to the individual patient, depending on medical history, clinical manifestations, availability of resources in the clinical setting, and the clinician's professional judgment

    C-reactive protein reference percentiles among pre-adolescent children in Europe based on the IDEFICS study population

    Get PDF
    OBJECTIVES: C-reactive protein (CRP) is involved in a wide range of diseases. It is a powerful marker for inflammatory processes used for diagnostic and monitoring purposes. We aimed to establish reference values as data on the distribution of serum CRP levels in young European children are scarce. SUBJECTS: Reference values of high-sensitivity CRP concentrations were calculated for 9855 children aged 2.0-10.9 years, stratified by age and sex. The children were recruited during the population-based European IDEFICS study (Identification and prevention of Dietary-and lifestyle-induced health Effects in Children and infantS) with 18 745 participants recruited from 2007 to 2010. RESULTS: In 44.1 % of the children, CRP values were below or equal the detection limit of 0.2 mg/l. Median CRP concentrations showed a slight negative age trend in boys and girls, whereas serum CRP values were slightly higher in girls than in boys across all age groups. CONCLUSIONS: Our population-based reference values of CRP may guide paediatric practice as elevated values may require further investigation or treatment. Therefore, the presented reference values represent a basis for clinical evaluation and for future research on risk assessment of diseases associated with increased CRP levels among children

    Design principles in housing for people with complex physical and cognitive disability: towards an integrated framework for practice

    Get PDF
    To develop a research-based environmental framework to guide the design and construction of suitable residential dwellings for individuals with complex disability. An environmental approach to housing design and development recognises that there are physical, psychological and social components relating to housing design, dwelling location and the neighbourhood context, and that these elements interact to affect the physical, psychological, and social wellness of individuals. Following theoretical review and synthesis, a comprehensive set of design features that are conducive to residents’ wellness and quality of life are described. It is clear that housing design and development for people with complex disability ought to consider the physical, social, natural, symbolic, and care environment in relation to housing design, dwelling location, and the neighbourhood context for improved housing outcomes. An integrated housing design and development framework is presented. It is hoped this practical matrix/evaluative tool will inform future inclusive housing design and development decisions in Australia and internationally. The application of this framework is especially relevant to political climates striving to achieve design innovation to increase housing choice for people with complex disability
    corecore