Characteristics of surface-water flows in the ridge and slough landscape of Everglades National Park: implications for particulate transport

Over the last one hundred years, compartmentalization and water management activities have reduced water flow to the ridge and slough landscape of the Everglades. As a result, the once corrugated landscape has become topographically and vegetationally uniform. The focus of this study was to quantify variation in surface flow in the ridge and slough landscape and to relate flow conditions to particulate transport and deposition. Over the 2002–2003 and 2003–2004 wet seasons, surface velocities and particulate accumulation were measured in upper Shark River Slough in Everglades National Park. Landscape characteristics such as elevation, plant density and biomass also were examined to determine their impact on flow characteristics and material transport. The results of this study demonstrate that the release of water during the wet season not only increases water levels, but also increased flow speeds and particulate transport and availability. Further, flow speeds were positively and significantly correlated with water level thereby enhancing particulate transport in sloughs relative to ridges especially during peak flow periods. Our results also indicate that the distribution of biomass in the water column, including floating plants and periphyton, affects velocity magnitude and shape of vertical profiles, especially in the sloughs where Utricularia spp. and periphyton mats are more abundant. Plot clearing experiments suggest that the presence of surface periphyton and Utricularia exert greater control over flow characteristics than the identity (i.e., sawgrass or spike rush) or density of emergent macrophytes, two parameters frequently incorporated into models describing flow through vegetated canopies. Based on these results, we suggest that future modeling efforts must take the presence of floating biomass, such as Utricularia, and presence of periphyton into consideration when describing particulate transport

ODAM Expression Inhibits Human Breast Cancer Tumorigenesis

We have posited that Odontogenic Ameloblast Associated Protein (ODAM) serves as a novel prognostic biomarker in breast cancer and now have investigated its potential role in regulating tumor growth and metastasis. Human breast cancer MDA-MB-231 cells were transfected with a recombinant ODAM plasmid construct (or, as a control, the plasmid vector alone). ODAM expression increased adhesion and apoptosis of the transfected MDA-MB-231 cells and suppressed their growth rate, migratory activity, and capability to invade extracellular matrix-coated membranes. Implantation of such cells into mouse mammary fat pads resulted in significantly smaller tumors than occurred in animals that received control cells; furthermore, ODAM-expressing cells, when injected intravenously into mice, failed to metastasize, whereas the control-transfected counterparts produced extensive lung lesions. Our finding that induction of ODAM expression in human breast cancer cells markedly inhibited their neoplastic properties provides further evidence for the regulatory role of this molecule in tumorigenesis and, consequently, is of potential clinical import

Experimental evidence for an intermediate phase in the multiferroic YMnO3

We have studied YMnO$_{3}$ by high-temperature synchrotron X-ray powder diffraction, and have carried out differential thermal analysis and dilatometry on a single crystal sample. These experiments show two phase transitions at about 1100K and 1350K, respectively. This demonstrates the existence of an intermediate phase between the room temperature ferroelectric and the high temperature centrosymmetric phase. This study identifies for the first time the different high-temperature phase transitions in YMnO$_{3}$.Comment: 10 pages 5 figures. New version, Additional data, Journal of Physics: Condensed Matter, in Pres

Lactones and Flavonoids isolated from the Leaves of Globimetula braunii

The dried powdered leaves of Globimetula braunii (Engler) Van Tiegh were effectively extracted by the cold extraction method. Purification of the EtOAc-soluble and MeOH-soluble extracts successfully yielded two lactones namely (R)-6-[(S)-2-hydroxy-4-(4-hydroxyphenyl)butyl]–5,6-dihydropyran-2-one (dodoneine) 1 and (1R,5S,7S)-[2-(4-hydroxyphenyl)ethyl]-2,6-dioxabicyclo[3.3.1]-nonan-3-one (2), together with five flavonoids namely quercetin 3, (+)-catechin 4, quercitrin 5, rutin 6 and avicularin 7. Their structures were established by spectroscopic means, and the absolute configuration of compound 1 was confirmed by X-ray analysis

Bunch Length Measurements at the CEBAF Injector at 130 kV

In this work, we investigated the evolution in bunch length of beams through the CEBAF injector for low to high charge per bunch. Using the General Particle Tracer (GPT), we have simulated the beams through the beamline of the CEBAF injector and analyzed the beam to get the bunch lengths at the location of chopper. We performed these simulations with the existing injector using a 130 kV gun voltage. Finally, we describe measurements to validate these simulations. The measurements have been done using chopper scanning technique for two injector laser drive frequency modes: one with 500 MHz, and another with 250 MHz

New Results at JLab Describing Operating Lifetime of GaAs Photo-Guns

Polarized electrons from GaAs photocathodes have been key to some of the highest-impact results of the Jefferson Lab science program over the past 30 years. During this time, various studies have given insight into improving the operational lifetime of these photocathodes in DC high-voltage photo-guns while using lasers with spatial Gaussian profiles of typically 0.5 mm to 1 mm FWHM, cathode voltages of 100 kV to 130 kV, and a wide range of beam currents up to multiple mA. In this contribution, we show recent experimental data from a 100 kV to 180 kV setup and describe our progress at predicting the lifetime based on the calculable dynamics of ionized gas molecules inside the gun. These new experimental studies at Jefferson Lab are specifically aimed at exploring the ion damage of higher-voltage guns being built for injectors

CEBAF Injector Model for K\u3csub\u3eL\u3c/sub\u3e Beam Conditions

The Jefferson Lab KL experiment will run at the Continuous Electron Beam Accelerator Facility with a much lower bunch repetition rate (7.80 or 15.59 MHz) than nominally used (249.5 or 499 MHz). While the proposed average current of 2.5 - 5.0 µA is relatively low compared to the maximum CEBAF current of approximately 180 µA, the corresponding bunch charge is atypically high for CEBAF injector operation. In this work, we investigated the evolution and transmission of low-rep-rate, high-bunch-charge (0.32 to 0.64 pC) beams through the CEBAF injector. Using the commercial software General Particle Tracer, we have simulated and analyzed the beam characteristics for both values of bunch charge. We performed these simulations with the existing injector using a 130 kV gun voltage. We have calculated and measured the transmission as a function of the photocathode laser spot size and pulse length. We report on the findings of these simulations and optimum parameters for operating the experiment

Crystal Structure of 2′,3′-Di-O-Acetyl-5′-Deoxy-5-Fluorocytidine with N–H···(O,F) Proton Donor Bifurcated and (C,N)–H···O Bifurcated Acceptor Dual Three-Center Hydrogen Bond Configurations

The title compound, C13H16O6N3F, features a central furan ring containing four carbon atom chiral centers with a 4-amino-5-fluoro-2-oxopyrimidine group, two acetyl groups and a methyl group bonded at the 2,3,4,5 positions, each in an absolute R configuration (2R,3R,4R,5R). It crystallizes in the monoclinic space group C2 with unit cell parameters a = 14.5341(3), b = 7.26230(10), c = 16.2197(3) Å, β = 116.607(2)°, Z = 4. An extensive array of intra and inter molecular hydrogen bond interactions dominate crystal packing in the unit cell highlighted by a relatively rare three-center proton-bifurcated donor N–H···(O,F) hydrogen bond interaction in cooperation with a second, (C,N)–H···O bifurcated acceptor three-center hydrogen bond in a supportive fashion. Additional weak Cg π-ring inter molecular interactions between a fluorine atom and the 4-amino-5-fluoro-2-oxopyrimidine ring in concert with multiple donor and acceptor hydrogen bonds significantly influence the bond distances, bond angles and torsion angles of the deoxy-5-fluorocytidine group. Comparison to a MOPAC computational calculation provides support to these observations

Characterization of Aerosol Deposited Cesium Lead Tribromide Perovskite Films on Interdigited ITO Electrodes

Aerosol deposition (AD) is a promising additive manufacturing method to fabricate low-cost, scalable films at room temperature, but has not been considered for semiconductor processing, so far. The successful preparation of cesium lead tribromide (CsPbBr) perovskite films on interdigitated indium tin oxide (ITO) electrodes by means of AD is reported here. The – µm thick layers are dense and have good adhesion to the substrate. The orthorhombic Pnma crystal structure of the precursor powder was retained during the deposition process with no signs of defect formation. The formation of electronic defects by photoluminescence spectroscopy is investigated and found slightly increased carrier recombination from defect sites for AD films compared to the powder. A nonuniform defect distribution across the layer, presumably induced by the impact of the semiconducting grains on the hard substrate surface, is revealed. The opto-electronic properties of AD processed semiconducting films is further tested by electrical measurements and confirmed good semiconducting properties and high responsivity for the films. These results demonstrate that AD processing of metal halide perovskites is possible for opto-electronic device manufacturing on D surfaces. It is believed that this work paves the way for the fabrication of previously unimaginable opto-electronic devices by additive manufacturing