174 research outputs found
Benthonic populations
Lo studio raccoglie i risultati delle campagne di monitoraggio dal 2003 al 2005 mirate alla valutazione dell’evoluzione dei popolamenti bentonici nella zona del Dosso di Santa Croce (Golfo di Trieste – Alto Adriatico). Lo studio si pone su una storica scia di monitoraggi svolti su strutture artificiali, il cui fine è la valutazione dell’utilità di queste in termini di ripristino della biodiversità in aree stressate e in termini di ripopolamento ittico e bentonico a fini commerciali. Sono state campionate 25 stazioni suddivise in tre gruppi: la parte sommitale del Dosso, le pendici e la parte circostante. Lo studio ha permesso di raccogliere e determinare, nella campagna di campionamento del 2003, 21836 individui, di cui 20042 identificati fino a livello di specie, e 203 taxa. Nella campagna del 2005 sono stati raccolti e determinati 19260 individui (17265 fino a livello di specie) e 211 taxa.L’interesse per lo studio delle Dinoflagellate viene riportato in letteratura in relazione alla capacità di questi organismi di sviluppare una forma chiamata cisti in risposta a particolari variazioni dei parametri ambientali. Tali cisti possono, in determinate condizioni, sopravvivere per un periodo di tempo prolungato (5-10 anni). Queste caratteristiche fanno delle Dinoflagellate dei potenziali indicatori di mutate condizioni ambientali quali andamento delle correnti e variazioni nel tasso di sedimentazione. Obiettivo del presente studio è quello di chiarire la correlazione tra la distribuzione delle cisti di Dinoflagellati e i fattori biotici e abiotici che si manifestano in prossimità delle barriere artificiali poste in prossimità del Dosso di Santa Croce (Golfo di Trieste – Alto Adriatico). La campagna di campionamento si è svolta nel periodo luglio-dicembre 2005 in relazione al ciclo vitale delle Dinoflagellate. I campioni sono stati raccolti con metodo diretto tramite carotaggi effettuati durante immersioni subacquee con autorespiratore
Microencapsulated Garcinia kola and Hunteria umbellata Seeds Aqueous Extracts – Part 1: Effect of microencapsulation process.
Objective: This study investigates microcapsulated aqueous extracts of Garcinia kola (GK) and Hunteria umbellata (HU) seeds. Method: Extracts obtained after maceration of dried powdered seeds were prepared as microcapsules with chitosan-alginate by counterion coacervation method. Microcapsules were characterized using differential scanning calorimetry (DSC), x-ray diffractometry (XRD) and fourier transform infrared (FTIR) spectroscopy. In vitro release studies were carried out at pH 1.2 for 2 h and 6.8 for a further 10 h. Results: Between 20 and 50% extract release occurred from microcapsules after 2 h while conventional tablets released 100% after 1 h at simulated gastric pH. At pH 6.8, >80% of extract was released from microcapsules after 6 h. DSC revealed the presence of complex materials. XRD and FTIR showed stable character of the plant extracts within the microcapsules. Conclusion: Controlled release of aqueous extracts derived from these plants was achieved by microencapsulation and therefore can be developed as suitable delivery devices
Chitosan-alginate microparticles of Andrographis paniculata and Annona muricata extracts for Controlled Release
This study investigates the properties of microparticles prepared from Andrographis paniculata (AP) and Annona muricata (AM) aqueous extracts for controlled release. Extracts obtained by maceration of the dried powdered plant leaves were microencapsulated by counterion coacervation method. Microcapsules were characterized using Fourier-transform infrared-spectroscopy (FTIR), x-ray difractometry (XRD) and differential scanning calorimetry (DSC).In vitro release studies were carried out at pH 1.2 for 2 h and 6.8 for a further 10 h. Release was monitored at274 and 230 nm for AM and AP, respectively. Encapsulation efficacy was less than 52% for AP and 70% for AM. In vitro drug release at pH 1.2 showed less than 40% release from the microcapsules after 2h while over 90% of extract was released after 6h at pH 6.8. Conventional capsules released the content within 1 h in simulated gastric fluid. FTIR, XRD and DSC results indicate the stable character of the extract within the microcapsules. Microencapsulation with chitosan- alginate controlled the release of Andrographis paniculata (AP) and Annona muricata (AM) aqueous extracts
Propylene–Butene Copolymers: Tailoring Mechanical Properties from Isotactic Polypropylene to Polybutene
Isotactic propylene-butene copolymers [i(P-co-B)] with precise and controlled molecular structures were synthesized with various organometallic catalysts having different stereoselectivities. Stereoregular and stereodefective samples of i(P-co-B) with 1-butene (B) content variable in the whole range of composition were synthesized. All samples crystallize regardless of composition, indicating cocrystallization of propene and 1-butene units, which are incorporated in the unit cells of polymorphic forms of isotactic poly(propylene) (iPP) and isotactic poly(1-butene) (iPB). The copolymers show a continuum change of crystal morphology with the composition, transforming from big spherulites to bundle-like and needle-like crystals, to granular crystals. The cocrystallization allows maintaining high crystallinity of copolymers for any composition and provides an opportunity to develop outstanding mechanical properties that can be tailored by changing the isotacticity and composition. This allows, ideally, combining in the same material the different properties of stiffness of iPP and flexibility of iPB. These copolymers show, indeed, mechanical properties intermediate between iPP and iPB, ranging from stiffness/brittleness and ductility/flexibility depending on the composition and isotacticity, with high strength and Young's modulus that may be regulated by the stereoregularity of the iPP and iPB sequences, which is, in turn, dictated by the catalyst structure
Morphology of Isotactic Polypropylene–Polyethylene Block Copolymers Driven by Controlled Crystallization
A study of the morphology of diblock copolymers composed of two crystalline blocks of isotactic polypropylene (iPP) and polyethylene (PE) is shown. The samples form phase-separated structures in the melt because of the incompatibility between iPP and PE blocks. Cylindrical PE microdomains are visible at room temperature in the sample with a PE volume fraction of 26%, rapidly quenched from the melt in liquid nitrogen. In the quenched sample, PE crystallizes inside the PE cylindrical microdomains, whereas crystals of iPP are not visible in the iPP domains because the quenching prevents crystallization of the lamellar α form. Less rapid cooling of the melt produces, instead, breakout crystallization, where the phase-separated structure of the melt is destroyed by the slow crystallization of the α form of iPP and of PE. The succession of crystallization of iPP and PE and the resulting final morphology have been analyzed by inducing selective and different orientations of iPP and PE crystals through epitaxial crystallization onto the benzoic acid (BA) crystal substrate. Epitaxy produces oriented crystallization of iPP and PE, with a unique alignment of PE lamellar crystals and a double orientation of iPP crystals on to the (001) exposed face of BA. Epitaxy destroys the phase-separated structure of the melt and induces the formation of ordered lamellar nanostructures with alternated layers of iPP and PE, whose orientation is defined by the alignment of PE or iPP crystals, which, in turn, is determined by epitaxy. The results indicate that crystalline block copolymers offer the opportunity to create nanoscale patterns on thin films and improve the possibility of controlling the microstructure of block copolymers and the alignment of microdomains by controlling the crystallization process
Time-resolving small angle X-Ray scattering analysis of melt crystallization of mixtures of regular and irregular isotactic polypropylene samples
The melting/crystallization properties of blends obtained by mixing two isotactic polypropylene (iPP) samples synthesized using single-site metallocene catalyst systems and containing a high and low concentration of rr triads as stereo-defects, are studied. The changes occurring at lamellar length scale during a heating/cooling cycle at constant scanning rate are followed in situ by performing time-resolved small angle X-ray scattering (SAXS) measurements. Data analysis demonstrates that the evolution of the SAXS intensity with increase/decrease of the temperature is controlled by the separate melting/crystallization of the two components, the differences in the thermal expansion (contraction) coefficient of the amorphous and crystalline phases and the role of thermal fluctuations in electron density. The two components give rise to different populations of intermixed lamellar stacks in the blends which originate from the good miscibility of the low and high stereoregular samples in the melt.info:eu-repo/semantics/publishedVersio
Nano-in-Nano Approach for Enzyme Immobilization Based on Block Copolymers
We set up a facile approach for fabrication of supports with tailored nanoporosity for immobilization of enzymes. To this aim block copolymers (BCPs) self-assembly has been used to prepare nanostructured thin films with well-defined architecture containing pores of tailorable size delimited by walls with tailorable degree of hydrophilicity. In particular, we employed a mixture of polystyrene-block-poly(l-lactide) (PS-PLLA) and polystyrene-block-poly(ethylene oxide) (PS-PEO) diblock copolymers to generate thin films with a lamellar morphology consisting of PS lamellar domains alternating with mixed PEO/PLLA blocks lamellar domains. Selective basic hydrolysis of the PLLA blocks generates thin films, patterned with nanometric channels containing hydrophilic PEO chains pending from PS walls. The shape and size of the channels and the degree of hydrophilicity of the pores depend on the relative length of the blocks, the molecular mass of the BCPs, and the composition of the mixture. The strength of our approach is demonstrated in the case of physical adsorption of the hemoprotein peroxidase from horseradish (HRP) using 2,2?-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) with H2O2 as substrate. The large surface area, the tailored pore sizes, and the functionalization with hydrophilic PEO blocks make the designed nanostructured materials suitable supports for the nanoconfinement of HRP biomolecules endowed with high catalytic performance, no mass-transfer limitations, and long-term stability
“New records of rare species in the Mediterranean Sea” (October 2021)
“New records of rare species in the Mediterranean Sea” (October 2021
- …