Mathematically formulated key performance indicators for design and evaluation of treatment trains for resource recovery from urban wastewater

While urban wastewater infrastructure is aging and no longer adequate, climate change and sustainability are urging the transition from pollution management to resource recovery. Lacking evidence-based quantitative evaluation of the potential benefits and consequences of resource recovery from wastewater hinders the negotiation amongst stakeholders and slows down the transition. This study proposes mathematical formulations for technical, environmental, economic, and social key performance indicators (KPIs) that can be used to quantify the benefits and the risks of resource recovery. The proposed formulations are derived from the literature and validated with stakeholders. Each KPI is mathematically formulated at treatment train level by considering: (1) the characteristics of individual unit processes (UPs) in the treatment train (TT), (2) the context in which the TT is installed, and (3) the resources to be recovered. The mathematical formulations of the KPIs proposed in this study enable a transparent, consistent and informative evaluation of existing treatment trains, as well as support the (computer aided) design of new ones. This could aid the transition from urban wastewater treatment to resource recovery from urban wastewater.</p

Controlled Localized Metal–Organic Framework Synthesis on Anion Exchange Membranes

Metal–organic framework (MOF) films can be used in various applications. In this work, we propose a method that can be used to synthesize MOF films localized on a single side of an anion exchange membrane, preventing the transport of the metal precursor via Donnan exclusion. This is advantageous compared to the related contra-diffusion method that results in the growth of a MOF film on both sides of the support, differing in quality on both sides. Our proposed method has the advantage that the synthesis conditions can potentially be tuned to create the optimal conditions for crystal growth on a single side. The localized growth of the MOF is governed by Donnan exclusion of the anion exchange membrane, preventing metal ions from passing to the other compartment, and this leads to a local control of the precursor stoichiometry. In this work, we show that our method can localize the growth of both Cu-BTC and ZIF-8 in water and in methanol, respectively, highlighting that this method can used for preparing a variety of MOF films with varying characteristics using soluble precursors at room temperature

Aerobic nonylphenol degradation and nitro-nonylphenol formation by microbial cultures from sediments

Nonylphenol (NP) is an estrogenic pollutant which is widely present in the aquatic environment. Biodegradation of NP can reduce the toxicological risk. In this study, aerobic biodegradation of NP in river sediment was investigated. The sediment used for the microcosm experiments was aged polluted with NP. The biodegradation of NP in the sediment occurred within 8 days with a lag phase of 2 days at 30°C. During the biodegradation, nitro-nonylphenol metabolites were formed, which were further degraded to unknown compounds. The attached nitro-group originated from the ammonium in the medium. Five subsequent transfers were performed from original sediment and yielded a final stable population. In this NP-degrading culture, the microorganisms possibly involved in the biotransformation of NP to nitro-nonylphenol were related to ammonium-oxidizing bacteria. Besides the degradation of NP via nitro-nonylphenol, bacteria related to phenol-degrading species, which degrade phenol via ring cleavage, are abundantly present

Influence of Substrates on the Surface Characteristics and Membrane Proteome of Fibrobacter succinogenes S85

Although Fibrobacter succinogenes S85 is one of the most proficient cellulose degrading bacteria among all mesophilic organisms in the rumen of herbivores, the molecular mechanism behind cellulose degradation by this bacterium is not fully elucidated. Previous studies have indicated that cell surface proteins might play a role in adhesion to and subsequent degradation of cellulose in this bacterium. It has also been suggested that cellulose degradation machinery on the surface may be selectively expressed in response to the presence of cellulose. Based on the genome sequence, several models of cellulose degradation have been suggested. The aim of this study is to evaluate the role of the cell envelope proteins in adhesion to cellulose and to gain a better understanding of the subsequent cellulose degradation mechanism in this bacterium. Comparative analysis of the surface (exposed outer membrane) chemistry of the cells grown in glucose, acid-swollen cellulose and microcrystalline cellulose using physico-chemical characterisation techniques such as electrophoretic mobility analysis, microbial adhesion to hydrocarbons assay and Fourier transform infra-red spectroscopy, suggest that adhesion to cellulose is a consequence of an increase in protein display and a concomitant reduction in the cell surface polysaccharides in the presence of cellulose. In order to gain further understanding of the molecular mechanism of cellulose degradation in this bacterium, the cell envelope-associated proteins were enriched using affinity purification and identified by tandem mass spectrometry. In total, 185 cell envelope-associated proteins were confidently identified. Of these, 25 proteins are predicted to be involved in cellulose adhesion and degradation, and 43 proteins are involved in solute transport and energy generation. Our results supports the model that cellulose degradation in F. succinogenes occurs at the outer membrane with active transport of cellodextrins across for further metabolism of cellodextrins to glucose in the periplasmic space and inner cytoplasmic membrane

Enhanced biodegradation of PAHs in historically contaminated soil by M. gilvum inoculated biochar

The inoculation of rice straw biochar with PAH-degrading Mycobacterium gilvum (1.27 × 1011 ± 1.24 × 1010 cell g−1), and the subsequent amendment of this composite material to PAHs contaminated (677 mg kg−1) coke plant soil, was conducted in order to investigate if would enhance PAHs biodegradation in soils. The microbe-biochar composite showed superior degradation capacity for phenanthrene, fluoranthene and pyrene. Phenanthrene loss in the microbe-biochar composite, free cell alone and biochar alone treatments was, respectively, 62.6 ± 3.2%, 47.3 ± 4.1% and non-significant (P > 0.05); whereas for fluoranthene loss it was 52.1 ± 2.3%; non-significant (P > 0.05) and non-significant (P > 0.05); and for pyrene loss it was 62.1 ± 0.9%; 19.7 ± 6.5% and 13.5 ± 2.8%. It was hypothesized that the improved remediation was underpinned by i) biochar enhanced mass transfer of PAHs from the soil to the carbonaceous biochar “sink”, and ii) the subsequent degradation of the PAHs by the immobilized M. gilvum. To test this mechanism, a surfactant (Brij 30; 20 mg g−1 soil), was added to impede PAHs mass transfer to biochar and sorption. The surfactant increased solution phase PAH concentrations and significantly (P < 0.05) reduced PAH degradation in the biochar immobilized M. gilvum treatments; indicating the enhanced degradation occurred between the immobilized M. gilvum and biochar sorbed PAHs

Current trend in synthesis, Post-Synthetic modifications and biological applications of Nanometal-Organic frameworks (NMOFs)

Since the early reports of MOFs and their interesting properties, research involving these materials has grown wide in scope and applications. Various synthetic approaches have ensued in view of obtaining materials with optimised properties, the extensive scope of application spanning from energy, gas sorption, catalysis biological applications has meant exponentially evolved over the years. The far‐reaching synthetic and PSM approaches and porosity control possibilities have continued to serve as a motivation for research on these materials. With respect to the biological applications, MOFs have shown promise as good candidates in applications involving drug delivery, BioMOFs, sensing, imaging amongst others. Despite being a while away from successful entry into the market, observed results in sensing, drug delivery, and imaging put these materials on the spot light as candidates poised to usher in a revolution in biology. In this regard, this review article focuses current approaches in synthesis, post functionalization and biological applications of these materials with particular attention on drug delivery, imaging, sensing and BioMOFs

Role of (de)sorption on the bioavailability of hydrophobic compounds in the soil environment. A literaturestudy

Sorptie van hydrofobe verbindingen vindt niet altijd plaats via partitie in de organische stof fractie. Oppervlakte sorptie op minerale bodembestanddelen is ook mogelijk. Chemisorptie en fysische binding in organische humus polymeren zijn verantwoordelijk voor gebonden residu vorming. De concentratie vaste fase blijkt de sorptiecoefficient te kunnen beinvloeden. Om desorptiekinetiek te kunnen modelleren is het noodzakelijk te bepalen welke processen desorptiekinetiek beheersen. Er kan onderscheid worden gemaakt tussen momentane en cumulatieve biologische beschikbaarheid. De momentane beschikbare hoeveelheid wordt bepaald door de hoeveelheid in de waterfase. De cumulatieve beschikbaarheid wordt bepaald door de initiele momentane beschikbaarheid en de desorptiesnelheid.Abstract not availableRIV