8,545 research outputs found

    THROES: a caTalogue of HeRschel Observations of Evolved Stars. I. PACS range spectroscopy

    Full text link
    This is the first of a series of papers presenting the THROES (A caTalogue of HeRschel Observations of Evolved Stars) project, intended to provide a comprehensive overview of the spectroscopic results obtained in the far-infrared (55-670 microns) with the Her- schel space observatory on low-to-intermediate mass evolved stars in our Galaxy. Here we introduce the catalogue of interactively reprocessed PACS (Photoconductor Array Camera and Spectrometer) spectra covering the 55-200 microns range for 114 stars in this category for which PACS range spectroscopic data is available in the Herschel Science Archive (HSA). Our sample includes objects spanning a range of evolutionary stages, from the asymptotic giant branch to the planetary nebula phase, displaying a wide variety of chemical and physical properties. The THROES/PACS catalogue is accessible via a dedicated web-based inter- face (https://throes.cab.inta-csic.es/) and includes not only the science-ready Herschel spectroscopic data for each source, but also complementary photometric and spectroscopic data from other infrared observatories, namely IRAS (Infrared Astronomical Satellite), ISO (Infrared Space Observatory) or AKARI, at overlapping wavelengths. Our goal is to create a legacy-value Herschel dataset that can be used by the scientific community in the future to deepen our knowledge and understanding of these latest stages of the evolution of low-to-intermediate mass stars.Comment: 38 page

    Productos de alfarería de Cerro Macareno, Sevilla : naturaleza y procedencia de las ánforas y otros objetos cerámicos. Siglos VIII al III a. J.C.

    Get PDF
    Son muchos los métodos empleados para el estudio de las arcillas y de los productos cerámicos, contribuyendo de distinta manera, aunque complementaria, en el conocimiento de la composición, procedencia de los materiales, tecnología empleada en su elaboración y en general en todos aquellos procesos que se pudieron seguir en la tibricación del objeto cerámico. Estos métodos pueden ser, bien destructivos, aunque utilizando cantidades muy pequeñas de muestra, o bien no destructivos, cada vez más empleados en la investigación moderna. En el estudio de los materiales cerámicos, bien sea el soporte, o bien sea la pintura que ha servido para decorarlo, se emplea el análisisq\límico tradicional cualitativo y cuantitativo. Para este último se emplea cada \leimás la técnica de la absorción atómica. Asimismo, se emplean los siguientes métodos de análisis por vía física: La espectroscopía de emisión en el ultravioleta, que permite obtener un espectro de emisión en el que la parte más frecuentemente utilizada se sitúa entre 200 y 400 nm (ultravioleta). La espectrometría de fluorescencia de rayos X es una técnica desde hace tiempo utilizada. El método tiene poca sensibilidad para elementos tales como el cobre, níquel, cinc o hierro, a causa del «ruido de fondo» que el mismo aparato emite. La microfluorescencia permite operar directamente sobre una capa de pintura y su análisis no es destructivo. La microsonda electrónica es una aplicación de los principios y de la técnica de la espectrografía de emisión de rayos X. Su poder separador es infinitamente superior al del mejor instrumento óptico. La activación por neutrones, que precisa de una fuente generadora de estas radiaciones (pila atómica), es, por tanto, de muy difícil empleo. En España se utiliza la pila atómica de la Junta de Energía Nuclear. Este análisis permite determinar los elementos mayores, menores y trazas existentes en los objetos cerámicos y en los pigmentos. Es de un gran interés para conocer la procedencia de los materiales empleados, detectando el posible o posibles yacimientos de las arcillas utilizadas. La difracción de rayos X determina la estructura cristalina de los elementos y compuestos químicos ya sean orgánicos o inorgánicos, si bien la técnica no es válida para los compuestos amorfos. Para el estudio de aquellos materiales en los que la pintura se encuentre unida al soporte mediante lacas, gomas o barnices se emplean métodos de absorción en el infrarrojo, así como la cromatografía en fase gaseosa. Los métodos seguidos que se enumeran en el siguiente apartado nos han permitido identificar la procedencia y naturaleza de las arcillas utilizadas en los objetos cerámicos objeto de este estudio.Peer reviewe

    Materias primas y datos tecnológicos de piezas cerámicas antiguas del yacimiento arqueológico de Cerro Macareno (Sevilla)

    Get PDF
    14 páginas, 5 figuras, 7 tablas, 7 referencias.[EN]: A study of twenty eight fragments of amphoras from the archaeological bed of Cerro Macareno (Sevilla) has been done by chemical, physicochemical, X-ray diffraction and thermal methods, in order to establish the nature and provenance of the raw materials and the technological aspects of their fabrication. All the data lead to the conclusion that four of the pieces were probably imported from the Palestine-Phoenicie; the rest were made out of raw materials from the surrounding areas of Cerro Macareno. Most of the pieces were fired below 700°C, only four of them at about 700-750°C, and the other seven, probably from 800-850°C.[ES]: Se estudian la composición química y mineralógica, contenido en determinados elementos escasos, materias primas y temperaturas probables de cocción empleadas en la fabricación de un conjunto de 25 fragmentos de ánforas del yacimiento arqueológico de Cerro Macareno (Sevilla). Los métodos empleados fueron análisis químico, difracción de rayos-X, A.T.D., análisis por activación neutrónica y pruebas de cocción intermitente por calentamiento de cien en cien grados, desde 400° a 1.100° C seguido en cada caso de estudios por difracción de rayos-X y de observación de los cambios de color y aspecto de los cortes de las piezas. De todo ello se concluye que cuatro de las piezas estudiadas son de origen importado (Palesti-na-Fenicia), estando fabricadas las restantes con materiales procedentes de los aluviones del Guadalquivir, en las inmediaciones del Cerro Macareno. Del total de las piezas, 17 se cocieron probablemente a temperaturas inferiores a 700°C, cuatro a 700-750° C y siete a 800-850°C.Peer reviewe

    Climatic and tectonic controls on carbonate deposition in syn-rift siliciclastic fluvial systems: A case of microbialites and associated facies in the Late Jurassic

    Get PDF
    This work provides new insights to assess the factors controlling carbonate deposition in the siliciclastic fluvial systems of rift basins. Sedimentological and stable-isotope data of microbialites and associated carbonate facies, along with regional geological information, are shown to reveal the influence of climate and tectonics on the occurrence and attributes of carbonate deposits in these settings. The Vega Formation – a 150 m thick Lower Kimmeridgian siliciclastic fluvial sequence in Asturias Province (northern Spain) – constitutes a candidate for this approach. This unit includes varied facies (stromatolites; rudstones, packstones and wackestones containing oncoids, intraclasts, charophytes and shell bioclasts; marlstones and polygenic calcareous conglomerates) that formed in a low-gradient fluvial–lacustrine system consisting of shallow, low-sinuosity oncoid-bearing channels and pools within marshy areas, with sporadic coarse alluvial deposition. The sedimentological attributes indicate common erosion by channel overflow and rapid lateral changes of subenvironments caused by water-discharge variations. The carbonate fluvial–lacustrine system developed near uplifted marine Jurassic rocks. The occurrence of the system was conditioned by normal faults (active during the deposition of the unit) that favoured: (i) springs of HCO3–Ca-rich water from a Rhaetian–Sinemurian carbonate rock aquifer; and (ii) carbonate deposition in areas partially isolated from the adjacent siliciclastic fluvial system. The microbialite d13C and d18O values support deposition in a hydrologically open system, fed by ambient-temperature meteoric water, with riparian vegetation. Three types of lamination in the stromatolites and oncoids reflect distinct morphological types of cyanobacterial communities. The textural pattern of lamination parallels d13C and d18O changes, suggesting short-term cycles of precipitation and temperature. A moderately to strongly contrasted seasonal and/or pluriannual precipitation regime is inferred from the cyclic d13C pattern of the lamination and from the discontinuous and asymmetrical growth of oncoids. Thus, the isotopic and sedimentological attributes of the carbonate deposits were linked to short-term climate changes associated with semi-arid conditions, consistent with the studied climatic zone

    First report of a Late Jurassic lizard-like footprint (Asturias, Spain)

    Get PDF
    This report describes an isolated footprint preserved as a natural cast (convex hyporelief) from the Lastres Fm. (Late Jurassic) of northern Spain. The track consists of a small isolated pentadactyl ectaxonic right manus footprint. It is very asymmetric, plantigrade, with digits and palm deeply marked on the substrate. Digit IV is the longest, digits II and I are nearly equal in length and only a little shorter than III and IV. The footprint morphology is typical of a lizard – like or “lacertoid” track .The general outline of the footprint, the width to length ratio approximately equal to 1, the marked plantigrady and the substantial similarity in length of digits IV-I are coherent with a Rhynchosauroidea manual print. The global record of Rhynchosauroides ichnogenus shows that this specimen represents the latest occurrence of the ichnogenus. The most probable trackmaker was possibly a rhyncocephalian reptile.Se describe una huella de mano aislada, preservada como contramolde natural (hiporrelieve convexo) de la Formacion Lastres (Jurasico Superior) del N de Espana. La icnita, aislada, pentadactila, ectaxonica y de pequeno tamano, es atribuida a una mano derecha. Es muy asimetrica y plantigrada, con los dedos y la palma profundamente impresos en el sustrato. El dedo IV es el mas largo, mientras que el II y el I son casi iguales en longitud y solamente un poco mas cortos que el III y el IV. La morfologia de la huella es tipica de un lagarto o “lacertoide”. El contorno de la huella, la relacion longitud/anchura en torno a 1, la longitud similar de los dedos I-IV y el hecho de que sea claramente plantigrada son rasgos coherentes con una huella de mano de un Rhynchosauroidea. El registro global de Rhynchosauroides indica que el ejemplar asturiano representa la evidencia mas reciente de este icnogenero. El autor de la huella fue probablemente un reptil rincocefalo

    Conceptual design of the ITER fast-ion loss detector

    Get PDF
    et al.A conceptual design of a reciprocating fast-ion loss detector for ITER has been developed and is presented here. Fast-ion orbit simulations in a 3D magnetic equilibrium and up-to-date first wall have been carried out to revise the measurement requirements for the lost alpha monitor in ITER. In agreement with recent observations, the simulations presented here suggest that a pitch-angle resolution of ∼5° might be necessary to identify the loss mechanisms. Synthetic measurements including realistic lost alpha-particle as well as neutron and gamma fluxes predict scintillator signal-to-noise levels measurable with standard light acquisition systems with the detector aperture at ∼11 cm outside of the diagnostic first wall. At measurement position, heat load on detector head is comparable to that in present devices.This research was supported in part by the Spanish Ministry of Economy and Competitiveness (Grant Nos. RYC2011-09152, FIS2015-69362-P, and ENE2012- 31087) and the Marie Curie FP7 Integration Grant (No. PCIG11-GA2012-321455).Peer Reviewe

    México : un eje central en el desarrollo de las redes hispanas

    Get PDF
    Esta crónica describe la evolución del Análisis de Redes Sociales (ARS) realizado en México durante los últimos 45 años, con el objetivo de presentar su historia, sus actores principales, y su actividad interna e internacional. Para ello, se relatan los orígenes del análisis estructural mexicano desarrollado por investigadores aislados y su evolución hacia grupos institucionalizados. En segundo lugar presentamos (a) las líneas de investigación más productivas que emplean estrategias de ARS, (b) los equipos de investigación que utilizan activamente esta metodología y (c) los principales eventos académicos celebrados en México dedicados al estudio de las redes sociales. Además repasamos las contribuciones efectuadas por investigadores mexicanos en el evento de referencia en el área (los Sunbelt de la INSNA) del período 2001-2014 y los artículos publicados en la revista Redes: Revista Hispana para el Análisis de Redes Sociales, desde su lanzamiento. Finalmente, proponemos algunas directrices estratégicas para consolidar la institucionalización del ARS en la academia mexicana.This chronicle describes the evolution of Social Network Analysis (SNA) held in Mexico in the past 45 years, with the aim of presenting its history, its major actors and its domestic and international activity. To do this, the origins of the Mexican structural analysis developed by individual researchers and their evolution towards institutionalized groups are reported. Secondly we present (a) the most productive lines of research using SNA strategies, (b) the research teams actively using this methodology, and (c) the major academic events held in Mexico dedicated to the study of social networks . In addition we review the contributions made by Mexican researchers in the landmark event in this area (the Sunbelts) from 2001 to 2014, and the articles published in the journal Redes: Revista Hispana para el Análisis de Redes Sociales, since its launch. Finally, we propose some strategic guidelines to consolidate the institucionalition of SNA in Mexico's academia

    Two-neutron separation energies, binding energies and phase transitions in the interacting boson model

    Get PDF
    In the framework of the interacting boson model the three transitional regions (rotational-vibrational, rotational-γ\gamma-unstable and, vibrational-γ\gamma-unstable transitions) are reanalyzed. A new kind of plot is presented for studying phase transitions in finite systems such as atomic nuclei. The importance of analyzing binding energies and not only energy spectra and electromagnetic transitions, describing transitional regions is emphasized. We finally discuss a number of realistic examples.Comment: 34 pages, TeX (ReVTeX). 12 ps figures. 3 tables. Submitted to Nucl. Phys.

    El icnogénero Zoophycos y su valor sedimentológico y paleoambiental

    Get PDF
    El icnogénero Zoophycos (Cancellophynts) puede proporcionar datos sedimentológicos de sumo interés, lo cual viene favorecido por: su fácil reconocimiento (tanto en series estratigráficas como en testigos de sondeos), relativa frecuencia de aparición, y amplia reparticibn temporal (Ordovicico - Cuaternario)

    Monitoring of firmness evolution of peaches during storage by combining acoustic and impact methods

    Get PDF
    Firmness is a very important quality property in peach. The storage of peach affects its subsequent softening process and shelf life. The temperature and duration of storage mainly influence the firmness of stored fruit, and monitoring the evolution of fruits enables producers to manage its commercial life. The objective of the present study was to use non-destructive acoustic and impact tests to estimate firmness of peaches and to elucidate the influence of storage temperature and of time on the softening process of peach. Continuous and classification models based on variables obtained from non-destructive methods were developed. Parameters obtained from non-destructive methods were compared to destructive reference tests. The maximum force in ball compression correlated well with the maximum acceleration from impact test (r2 = 0.75), and with a band magnitude parameter from acoustic test (r2 = −0.71). Combining impact and acoustic parameters, the multiple correlation coefficient increases up to 0.91 (adjusted R2 = 0.82) in the prediction of the maximum force in ball compression. Classification models based on both non-destructive parameters and sorting peaches into two classes of firmness, showed scores of well classified higher than 90%
    corecore