701 research outputs found
An algebraic turbulence model for three-dimensional viscous flows
An algebraic turbulence model is proposed for use with three-dimensional Navier-Stokes analyses. It incorporates features of both the Baldwin-Lomax and Cebeci-Smith models. The Baldwin-Lomax model uses the maximum of a function f(y) to determine length and velocity scales. An analysis of the Baldwin-Lomax model shows that f(y) can have a spurious maximum close to the wall, causing numerical problems and non-physical results. The proposed model uses integral relations to determine delta(*) u(sub e) and delta used in the Cebeci-Smith mode. It eliminates a constant in the Baldwin-Lomax model and determines the two remaining constants by comparison to the Cebeci-Smith formulation. Pressure gradient effects, a new wake model, and the implementation of these features in a three-dimensional Navier-Stokes code are also described. Results are shown for a flat plate boundary layer, an annular turbine cascade, and endwall heat transfer in a linear turbine cascade. The heat transfer results agree well with experimental data which shows large variations in endwall Stanton number contours with Reynolds number
Three-dimensional Navier-Stokes analysis and redesign of an imbedded bellmouth nozzle in a turbine cascade inlet section
Verification of proposed turbopump blading performance will involve evaluation of candidate blades in cascade test facilities. It is necessary to be able to predict the flow fields within these cascades for the results to be applicable to actual engine environments. This work presents the results of a study to predict the flow field for the NASA Lewis Transonic Turbine Blade Cascade Facility, which is similar to those used to evaluate rocket propulsion turbines. A pitchwise nonuniform total pressure distribution was observed at the blade row leading edge plane. A CFD analysis was used to show that the cause of the flow nonuniformity was a pair of vortices that originated in an embedded bellmouth inlet. Further CFD analysis was used to verify that a redesigned inlet section resulted in a flow with acceptable uniformity. A computational analysis was chosen because physical accessibility to the inlet section was limited, and because a computational approach also allows one to examine design changes cheaper and more quickly than an experimental approach would. The PARC code, a general purpose, three-dimensional, Navier-Stokes code with multiblock solution capability, was chosen for the present study. Results are presented detailing the computational requirements needed to accurately predict flows of this nature. Calculations of the original geometry showed total pressure loss regions consistent in strength and in location to experimental measurements. An examination of the results shows that the distortions are caused by a pair of vortices that originate as a result of the interaction of the flow with the imbedded bellmouth. Computations were performed for an inlet geometry which eliminated the imbedded bellmouth by bridging the region between it and the upstream wall. This analysis indicated that eliminating the imbedded bellmouth eliminates the troublesome pair of vortices, resulting in a flow with much greater pitchwise uniformity
Advancing integrated care evaluation in shifting contexts: blending implementation research with case study design in project SUSTAIN
Background: Despite many studies evaluating the effectiveness of integrated care, evidence remains inconsistent. There is increasing commentary pointing out the mismatch between the ability to capture the somewhat ‘illusive’ impact of integrated care initiatives and programmes, and the most appropriate way to do this. Focusing on methodology, this paper describes and critically reviews the experiences of SUSTAIN, a Horizon 2020 funded project (2015–2019) with the purpose of advancing knowledge and understanding of cross-European integrated care evaluation. SUSTAIN sought to improve integrated care initiatives for older people in seven countries, and to maximise the potential for knowledge transfer and application across Europe. The methods approach drew from implementation research, employing the participative Evidence Integration Triangle (EIT) and incorporating a mixed method, multiple embedded case study design. A core set of qualitative and quantitative indicators, alongside context and process data, were created and tested within four key project domains (person-centredness, prevention-orientation, safety and efficiency). The paper critically discusses the overall approach, highlighting the value of the EIT and case study design, and signalling the challenges of data collection with frail older people and stakeholder involvement at the sites, as well as difficulties developing the core set of indicators.
Conclusions: Lessons learned and recommendations for advancing integrated care evaluation are put forward that focus on the status of integrated care as a complex intervention and a process. The use of implementation research methods and case study design are recommended as an additional evaluation approach for researchers to consider, alongside suggested ways of improving methods of data collection with frail populations and cost analys
Clasificación Internacional de la O.M.S. sobre la atención a la salud mental. Parte I, Asistencia Sanitaria.
Este documento constituye la primera parte de un trabajo más amplio que está siendo realizado por la OMS. La AEN agradece a este organismo, y en especial al Dr. Sampaio Faria, la autorización para su primera publicación en nuestro paÃs. La traducción del original ha sido subvencionada por el Centre d'Investigació, Formació i Assessorament (CIFA) del Patronat Flor de Maig de la Diputació de Barcelona. El Comité de Redacción expresa su especial reconocimiento a D. José Leal Rubio por su destacada labor en la consecución de todo este proceso
Clasificación Internacional de la O.M.S. sobre la atención a la salud mental. Parte I, Asistencia Sanitaria.
Este documento constituye la primera parte de un trabajo más amplio que está siendo realizado por la OMS. La AEN agradece a este organismo, y en especial al Dr. Sampaio Faria, la autorización para su primera publicación en nuestro paÃs. La traducción del original ha sido subvencionada por el Centre d'Investigació, Formació i Assessorament (CIFA) del Patronat Flor de Maig de la Diputació de Barcelona. El Comité de Redacción expresa su especial reconocimiento a D. José Leal Rubio por su destacada labor en la consecución de todo este proceso
Three-dimensional Navier-Stokes analysis and redesign of an imbedded bellmouth nozzle in a turbine cascade inlet section
Experimental measurements in the inlet of a transonic turbine blade cascade showed unacceptable pitchwise flow non-uniformity. A three-dimensional, Navier-Stokes computational fluid dynamics (CFD) analysis of the imbedded bellmouth inlet in the facility was performed to identify and eliminate the source of the flow non-uniformity. The blockage and acceleration effects of the blades were accounted for by specifying a periodic static pressure exit condition interpolated from a separate three-dimensional Navier-Stokes CFD solution of flow around a single blade in an infinite cascade. Calculations of the original inlet geometry showed total pressure loss regions consistent in strength and location to experimental measurements. The results indicate that the distortions were caused by a pair of streamwise vortices that originated as a result of the interaction of the flow with the imbedded bellmouth. Computations were performed for an inlet geometry which eliminated the imbedded bellmouth by bridging the region between it and the upstream wall. This analysis indicated that eliminating the imbedded bellmouth nozzle also eliminates the pair of vortices, resulting in a flow with much greater pitchwise uniformity. Measurements taken with an installed redesigned inlet verify that the flow non-uniformity has indeed been eliminated
Endwall Heat Transfer Measurements in a Transonic Turbine Cascade
Turbine blade endwall heat transfer measurements are given for a range of Reynolds and Mach numbers. Data were obtained for Reynolds numbers based on inlet conditions of 0.5 and 1.0 x 106, for isentropic exit Mach numbers of 1.0 and 1.3, and for freestream turbulence intensities of 0.25% and 7.0%. Tests were conducted in a linear cascade at the NASA Lewis Transonic Turbine Blade Cascade Facility. The test article was a turbine rotor with 136' of turning and an axial chord of 12.7 cm. The large scale allowed for very detailed measurements of both flow field and surface phenomena. The intent of the work is to provide benchmark quality data for computational fluid dynamics (CFD) code and model verification. The flow field in the cascade is highly three-dimensional as a result of thick boundary layers at the test section inlet. Endwall heat transfer data were obtained using a steady-state liquid crystal technique
Recommended from our members
Numerical investigation of recirculation in the UTSI MHD combustor
Numerical studies were carried out to investigate the gross structure of flow in cylindrical combustors. The combustor configurations studied are variations of a working design used at the University of Tennessee Space Institute to burn pulverized coal at temperatures in excess of 3000K for generation of a plasma feeding a magnetohydrodynamic channel. The numerical studies were conducted for an isothermal fluid; the main objective of the calculations was to study the effect of the oxidant injection pattern on the gross structure of recirculating flows within the combustor. The calculations illustrate the basic features of the flow in combustors of this type and suggest implications for the injection of coal and oxidizer in this type of combustor
- …