Rapid chemical analysis and antiprotozoal effect of the solvent extracts and the essential oil of Artemisia indica

Artemisia indica is used as antipyretic in malarial fevers during malaria outbreaks in India [1]. We selected this plant because reports concerning the presence of artemisinin is contradictory, the content of methoxyflavonoids that potentiate the antimalarial efficacy of artemisinin has remained unstudied and the essential oil of the plant from different regions shows great chemical variations. Solvent extracts [petroleum ether, n-hexane, dichloromethane, acetone, MeOH or EtOH (96, 80 or 60% v/v), and hot water] of A. indica leaves originated from the West Bengal region (India) were assessed by HPLC-DAD and HPLC-MS for the content of artemisinin and the characteristic Artemisia methoxyflavonoids, eupatin, casticin, chrysoplenetin, cirsilineol, chrysosphenol-D and artemetin. None of the extracts contained artemisinin or the methoxyflavonoids chrysosphenol-D and artemetin, while all extracts contained chrysoplenetin. Eupatin, casticin and cirsilineol were found in all extracts except for the p. ether, n-hexane and hot water infusion. The acetone and EtOH extracts contained the highest levels of polymethoxyflavonoids (1.15 – 1.17%), whereas the infusion was devoid of them. The essential oil of the plant was obtained by hydrodistillation and analyzed by GC and GC-MS simultaneously. Of the 92 compounds detected in the oil, camphor (13.0%) and caryophyllene oxide (10.87%) were the major components. All solvent extracts and the volatile oil showed in vitro antimalarial activity (1.8 – 20 µg/mL). Except for the infusion, all extracts were also active against other parasitic protozoa (Trypanosoma b. rhodesiense, T. cruzi, Leishmania donovani). This is the first study investigating both artemisinin and polymethoxyflavonoid content and detailed in vitro antiprotozoal potential of A. indica extracts and the essential oil

Nanostructured Optical Photonic Crystal Biosensor for HIV Viral Load Measurement

Detecting and quantifying biomarkers and viruses in biological samples have broad applications in early disease diagnosis and treatment monitoring. We have demonstrated a label-free optical sensing mechanism using nanostructured photonic crystals (PC) to capture and quantify intact viruses (HIV-1) from biologically relevant samples. The nanostructured surface of the PC biosensor resonantly reflects a narrow wavelength band during illumination with a broadband light source. Surface-adsorbed biotarget induces a shift in the resonant Peak Wavelength Value (PWV) that is detectable with <10 pm wavelength resolution, enabling detection of both biomolecular layers and small number of viruses that sparsely populate the transducer surface. We have successfully captured and detected HIV-1 in serum and phosphate buffered saline (PBS) samples with viral loads ranging from 104 to 108 copies/mL. The surface density of immobilized biomolecular layers used in the sensor functionalization process, including 3-mercaptopropyltrimethoxysilane (3-MPS), N-gamma-Maleimidobutyryl-oxysuccinimide ester (GMBS), NeutrAvidin, anti-gp120, and bovine serum albumin (BSA) were also quantified by the PC biosensor

Kinetic and economic analysis of reactive capture of dilute carbon dioxide with Grignard reagents

Carbon Dioxide Utilisation (CDU) processes face significant challenges, especially in the energetic cost of carbon capture from flue gas and the uphill energy gradient for CO2 reduction. Both of these stumbling blocks can be addressed by using alkaline earth metal compounds, such as Grignard reagents, as sacrificial capture agents. We have investigated the performance of these reagents in their ability to both capture and activate CO2 directly from dried flue gas (essentially avoiding the costly capture process entirely) at room temperature and ambient pressures with high yield and selectivity. Naturally, to make the process sustainable, these reagents must then be recycled and regenerated. This would potentially be carried out using existing industrial processes and renewable electricity. This offers the possibility of creating a closed loop system whereby alcohols and certain hydrocarbons may be carboxylated with CO2 and renewable electricity to create higher-value products containing captured carbon. A preliminary Techno-Economic Analysis (TEA) of an example looped process has been carried out to identify the electrical and raw material supply demands and hence determine production costs. These have compared broadly favourably with existing market values

A genetic modifier screen identifies chromosomal intervals harboring potential midline interacting genes

This work investigates the growth of B-C-N layers by chemical vapor deposition using methylamine borane (MeAB) as single-source precursor. MeAB has been synthesized and characterized, paying particular attention to the analysis of its thermolysis products, which are the gaseous precursors for B-C-N growth. Samples have been grown on Cu foils and transferred onto different substrates for their morphological, structural, chemical, electronic and optical characterizations. The results of these characterizations indicate a segregation of h-BN and Graphene-like (Gr) domains. However, there is an important presence of B and N interactions with C at the Gr borders, and of C interacting at the h-BN-edges, respectively, in the obtained nano-layers. In particular, there is significant presence of C-N bonds, at Gr/h-BN borders and in the form of N doping of Gr domains. The overall B:C:N contents in the layers is close to 1:3:1.5. A careful analysis of the optical bandgap determination of the obtained B-C-N layers is presented, discussed and compared with previous seminal works with samples of similar composition.Comment: 35 pages, 7 figure

Formability analysis of pre-strained AA5754-O sheet metal using Yld96 plasticity theory: Role of amount and direction of uni-axial pre-strain

Automotive industries are very much interested in formability of different pre-strained aluminum alloy sheets in the context of multistage stamping to fabricate complex components. In the present work, different uni-axial pre-strains of 6.4% and 12.2% were induced in AA5754-O aluminum alloy both along rolling direction (RD) and transverse direction (TD). The true stress-strain response, limiting dome height (LDH) and strain based forming limit diagram (ε-FLD) of as received and all pre-strained materials were evaluated experimentally. The anisotropy constitutive material model was developed using the Yld96 plasticity theory in-conjunction with the Hollomon isotropic hardening law to predict the yield strength evolution of the pre-strained materials. Also, it was found that the limiting strains in ε-FLD shifted significantly depending on the amount and direction of uni-axial pre-strain. Hence, the limiting strains of the as-received materials were transposed into stress space to estimate the stress based forming limit diagram (σ-FLD) using the anisotropy constitutive material model. Further, the dynamic shifts of ε-FLDs of four different pre-strained materials were predicted by successfully decoupling the σ-FLD of as-received materials within root mean square error of 0.008. Finite element models of both uni-axial pre-straining and subsequent LDH tests were developed, and the forming behavior of the pre-strained materials were predicted implementing the Yld96 plasticity model and estimated σ-FLD. It was found that LDH was significantly influenced by the amount of pre-strain, and the maximum thinning location shifted close to pole in the case of 12.2% pre-strained materials. However, the effect of uni-axial pre-strain direction on both LDH and maximum thinning location in AA5754-O material was very negligible

Enumeration of CD4+ T-Cells Using a Portable Microchip Count Platform in Tanzanian HIV-Infected Patients

Background CD4+ T-lymphocyte count (CD4 count) is a standard method used to monitor HIV-infected patients during anti-retroviral therapy (ART). The World Health Organization (WHO) has pointed out or recommended that a handheld, point-of-care, reliable, and affordable CD4 count platform is urgently needed in resource-scarce settings. Methods HIV-infected patient blood samples were tested at the point-of-care using a portable and label-free microchip CD4 count platform that we have developed. A total of 130 HIV-infected patient samples were collected that included 16 de-identified left over blood samples from Brigham and Women's Hospital (BWH), and 114 left over samples from Muhimbili University of Health and Allied Sciences (MUHAS) enrolled in the HIV and AIDS care and treatment centers in the City of Dar es Salaam, Tanzania. The two data groups from BWH and MUHAS were analyzed and compared to the commonly accepted CD4 count reference method (FACSCalibur system). Results The portable, battery operated and microscope-free microchip platform developed in our laboratory (BWH) showed significant correlation in CD4 counts compared with FACSCalibur system both at BWH (r = 0.94, p<0.01) and MUHAS (r = 0.49, p<0.01), which was supported by the Bland-Altman methods comparison analysis. The device rapidly produced CD4 count within 10 minutes using an in-house developed automated cell counting program. Conclusions We obtained CD4 counts of HIV-infected patients using a portable platform which is an inexpensive (<$1 material cost) and disposable microchip that uses whole blood sample (<10 µl) without any pre-processing. The system operates without the need for antibody-based fluorescent labeling and expensive fluorescent illumination and microscope setup. This portable CD4 count platform displays agreement with the FACSCalibur results and has the potential to expand access to HIV and AIDS monitoring using fingerprick volume of whole blood and helping people who suffer from HIV and AIDS in resource-limited settings.Wallace H. Coulter Foundation (Young Investigation Award in Bioengineering Award)National Institutes of Health (U.S.) (NIH R01AI081534)National Institutes of Health (U.S.) (NIH R21AI087107)National Institutes of Health (U.S.) (NIH grant RR016482)National Institutes of Health (U.S.) (grant AI060354)National Institutes of Health (U.S.) (NIH Fogarty Fellowship

Coherent diffraction of single Rice Dwarf virus particles using hard X-rays at the Linac Coherent Light Source

Single particle diffractive imaging data from Rice Dwarf Virus (RDV) were recorded using the Coherent X-ray Imaging (CXI) instrument at the Linac Coherent Light Source (LCLS). RDV was chosen as it is a wellcharacterized model system, useful for proof-of-principle experiments, system optimization and algorithm development. RDV, an icosahedral virus of about 70 nm in diameter, was aerosolized and injected into the approximately 0.1 mu m diameter focused hard X-ray beam at the CXI instrument of LCLS. Diffraction patterns from RDV with signal to 5.9 angstrom ngstrom were recorded. The diffraction data are available through the Coherent X-ray Imaging Data Bank (CXIDB) as a resource for algorithm development, the contents of which are described here.11Ysciescopu

Rhanterium epapposum Oliv. essential oil: Chemical composition and antimicrobial, insect-repellent and anticholinesterase activities

WOS: 000406021100005PubMed ID: 28725142The essential oil (EO) of the aerial parts of Rhanterium epapposum Oliv. (Asteraceae), was obtained by hydrodistillation. The oil was subsequently analyzed by both GC-FID and GC-MS, simultaneously. Forty-five components representing 99.2% of the oil composition were identified. The most abundant compounds were camphene (38.5%), myrcene (17.5%), limonene (10.1%) and alpha-pinene (8.7%). Referring to the ethnobotanical utilization, an insecticidal assay was performed, where the oil repelled the yellow fever mosquito Aedes aegypti L. at a minimum effective dose (MED of 0.035 +/- 0.010 mg/cm(2)) compared to the positive control DEET (MED of 0.015 +/- 0.004 mg/cm(2)). Additionally, the in vitro antimicrobial activity against a panel of pathogens was determined using a microdilution method. The acetyl- and butyrylcholine esterase inhibitory activities were measured using the colorimetric Ellman method. The bioassay results showed that the oil was rather moderate in antimicrobial and cholinesterase inhibitions when compared to the standard compoundsDeployed War-Fighter Protection Research Program - U.S. Department of Defense through Armed Forces Pest Management BoardWe thank Greg Allen (USDA-ARS, Center for Medical, Agricultural, and Veterinary Entomology, Gainesville, FL) for performing the mosquito bioassays. This study was supported partially by the Deployed War-Fighter Protection Research Program Grant funded by the U.S. Department of Defense through the Armed Forces Pest Management Board

Hypericum sp.: essential oil composition and biological activities

Phytochemical composition of Hypericum genus has been investigated for many years. In the recent past, studies on the essential oils (EO) of this genus have been progressing and many of them have reported interesting biological activities. Variations in the EO composition of Hypericum species influenced by seasonal variation, geographic distribution, phenological cycle and type of the organ in which EO are produced and/or accumulated have also been reported. Although many reviews attributed to the characterization as well as biological activities of H. perforatum crude extracts have been published, no review has been published on the EO composition and biological activities of Hypericum species until recently (Crockett in Nat Prod Commun 5(9):1493–1506, 2010; Bertoli et al. in Global Sci Books 5:29–47, 2011). In this article, we summarize and update information regarding the composition and biological activities of Hypericum species EO. Based on experimental work carried out in our laboratory we also mention possible biotechnology approaches envisaging EO improvement of some species of the genus.Fundação para a Ciência e a Tecnologia (FCT) - project PTDC/AGR AAM/70418/2006, SFRH/BD/ 13283/2003