Shear bands and cracking of metallic glass plates in bending

The thickness dependence of yielding and fracture of metallic glass plates subjected to bending is considered in terms of the shear band processes responsible for these properties. We argue that the shear band spacing (and length) scales with the thickness of the plate because of strain relaxation in the vicinity of the shear band at the surface. This is consistent with recent measurements of shear band spacing versus sample size. We also argue that the shear displacements in the shear band scale with the shear band length and plate thickness, thus causing cracks to be initiated in thicker plates at smaller bending strains. This leads to fracture bending strains that decrease markedly with increasing plate thickness, consistent with recent experiments. These results suggest that amorphous metals in the form of foams might have superior ductility and toughness

Mechanical properties of Zr_(57)Nb_5Al_(10)Cu_(15.4)Ni_(12.6) metallic glass matrix particulate composites

To increase the toughness of a metallic glass with the nominal composition Zr_(57)Nb_5Al_(10)Cu_(15.4)Ni_(12.6), it was used as the matrix in particulate composites reinforced with W, WC, Ta, and SiC. The composites were tested in compression and tension experiments. Compressive strain to failure increased by more than 300% compared with the unreinforced Zr_(57)Nb_5Al_(10)Cu_(15.4)Ni_(12.6), and energy to break of the tensile samples increased by more than 50%. The increase in toughness came from the particles restricting shear band propagation, promoting the generation of multiple shear bands and additional fracture surface area. There was direct evidence of viscous flow of the metallic glass matrix within the confines of the shear bands

Melt infiltration casting of bulk metallic-glass matrix composites

The authors describe a technique for melt infiltration casting of composites with a metallic-glass matrix. We made rods 5 cm in length and 7 mm in diameter. The samples were reinforced by continuous metal wires, tungsten powder, or silicon carbide particulate preforms. The most easily processed composites were those reinforced with tungsten and carbon steel continuous wire reinforcement. The Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 matrix was quenched to a glass after infiltrating the reinforcement. We analyzed the microstructure of the composites by x-ray diffraction and scanning electron microscopy. The measured porosity was less than 3% and the matrix was about 97% amorphous material

Corporate Culture and Its Connection with External and Internal Public Relations

The main aim of this article is to present the influence of corporate culture on company's stakeholders. This paper signalises the tendency in corporate communication with its internal and external publics. It is focused on two issues: corporate social responsibility and employer branding. Those two categories are consequences of corporate culture model.Głównym celem artykułu jest zaprezentowanie wpływu jaki wywiera charakter kultury korporacyjnej na związanych z przedsiębiorstwem interesariuszy (stakeholders). W artykule zasygnalizowane zostały główne tendencje wyznaczające charakter komunikacji między organizacją a jej wewnętrznym i zewnętrznym otoczeniem. Tekst koncentruje się na dwóch kwestiach: społecznej odpowiedzialności przedsiębiorstwa (corporate social responsibilty) i budowanie wizerunku pracodawcy (employer branding), które zaprezentowane zostały jako efekty określonego modelu kultury organizacyjnej

An online study combining the constructs from the theory of planned behaviour and protection motivation theory in predicting intention to test for chlamydia in two testing contexts

Chlamydia is a common sexually-transmitted infection that has potentially serious consequences unless detected and treated early. The health service in the UK offers clinic-based testing for chlamydia but uptake is low. Identifying the predictors of testing behaviours may inform interventions to increase uptake. Self-tests for chlamydia may facilitate testing and treatment in people who avoid clinic-based testing. Self-testing and being tested by a health care professional (HCP) involve two contrasting contexts that may influence testing behaviour. However, little is known about how predictors of behaviour differ as a function of context. In this study, theoretical models of behaviour were used to assess factors that may predict intention to test in two different contexts: self-testing and being tested by a HCP. Individuals searching for, or reading about chlamydia testing online were recruited using Google Adwords. Participants completed an online questionnaire that addressed previous testing behaviour and measured constructs of the Theory of Planned Behaviour and Protection Motivation Theory, which propose a total of eight possible predictors of intention. The questionnaire was completed by 310 participants. Sufficient data for multiple regression were provided by 102 and 118 respondents for self-testing and testing by a HCP respectively. Intention to self-test was predicted by vulnerability and self-efficacy, with a trend-level effect for response efficacy. Intention to be tested by a HCP was predicted by vulnerability, attitude and subjective norm. Thus, intentions to carry out two testing behaviours with very similar goals can have different predictors depending on test context. We conclude that interventions to increase self-testing should be based on evidence specifically related to test context

Universal Rights and Wrongs

This paper argues for the important role of customers as a source of competitive advantage and firm growth, an issue which has been largely neglected in the resource-based view of the firm. It conceptualizes Penrose’s (1959) notion of an ‘inside track’ and illustrates how in-depth knowledge about established customers combines with joint problem-solving activities and the rapid assimilation of new and previously unexploited skills and resources. It is suggested that the inside track represents a distinct and perhaps underestimated way of generating rents and securing long-term growth. This also implies that the sources of sustainable competitive advantage in important respects can be sought in idiosyncratic interfirm relationships rather than within the firm itself

Red-Cockaded Woodpecker Status and Management: West Gulf Coastal Plain and Interior Highlands

Red-cockaded woodpecker populations declined precipitously following European settlement and expansion and cutting of the original pine forests across the southeastern United States. By 1990 most residual populations lacked demographic viability, existed in degraded habitat, and were isolated from other populations. The primary causes of this situation were harvest of the original pine forests of the southeastern United States, conversion of forested lands to other uses, short-rotation silvicultural practices, and alteration of the fire regime in the regenerated forests. As social and legal mandates changed, management of red-cockaded woodpeckers became a higher priority. Intensive management for red-cockaded woodpeckers is currently practiced on most public and a few private lands that still support populations. Recent population trends and the current status of red-cockaded woodpeckers in Oklahoma, Arkansas, Texas, and Louisiana reflect historical factors and the efficacy of recent management

A test of the automaticity assumption of compliance tactics: discouraging undergraduate binge drinking by appealing to consistency and reciprocity

The mindfulness of compliance with requests making use of the commitment/consistency or the reciprocity principle was investigated. Participants (N = 129) received a foot-in-the-door (FITD) request (commitment/consistency application), a door-in-the-face (DITF) request (reciprocity application), or no request. Next, participants read either a weak or neutral message about the importance of moderate alcohol consumption then reported the likelihood of not drinking excessively for one week (target request). When accompanied by a weak message, the target request elicited less compliance if preceded by the DITF or FITD requests than by no initial request, suggesting compliance tactics sometimes increase thoughtfulness

Do columnar defects produce bulk pinning?

From magneto-optical imaging performed on heavy-ion irradiated YBaCuO single crystals, it is found that at fields and temperatures where strong single vortex pinning by individual irradiation-induced amorphous columnar defects is to be expected, vortex motion is limited by the nucleation of vortex kinks at the specimen surface rather than by half-loop nucleation in the bulk. In the material bulk, vortex motion occurs through (easy) kink sliding. Depinning in the bulk determines the screening current only at fields comparable to or larger than the matching field, at which the majority of moving vortices is not trapped by an ion track.Comment: 5 pages, 5 figures, submitted to Physical Review Letter