Towards the development of safe and commercially viable nickel–iron batteries: improvements to Coulombic efficiency at high iron sulphide electrode formulations

NiFe batteries are emerging as an important energy storage technology but suffer from a hydrogen-producing side reaction which has safety implications and reduces coulombic efficiency. This manuscript describes a systematic improvement approach for the production of Fe/FeS-based anodes at high concentrations of iron sulphide. Electrodes were made by mixing varying amounts of iron sulphide in such a way that its concentration ranges from between 50 and 100 % (compositions expressed on a PTFE-free basis). Electrode performance was evaluated by cycling our in-house-produced anodes against commercially available nickel electrodes. The results show that anodes produced with larger concentrations outperform their lower concentration counterparts in terms of coulombic efficiency although a slight decrease in the overall cell performance was found when using pure FeS anodes. At high FeS concentrations a hydrogen-producing side reaction has been virtually eliminated resulting in coulombic efficiencies of over 95 %. This has important implications for the safety and commercial development of NiFe batteries

The SASSCAL contribution to climate observation, climate data management and data rescue in Southern Africa

A major task of the newly established "Southern African Science Service Centre for Climate Change and Adaptive Land Management" (SASSCAL; www.sasscal.org) and its partners is to provide science-based environmental information and knowledge which includes the provision of consistent and reliable climate data for Southern Africa. Hence, SASSCAL, in close cooperation with the national weather authorities of Angola, Botswana, Germany and Zambia as well as partner institutions in Namibia and South Africa, supports the extension of the regional meteorological observation network and the improvement of the climate archives at national level. With the ongoing rehabilitation of existing weather stations and the new installation of fully automated weather stations (AWS), altogether 105 AWS currently provide a set of climate variables at 15, 30 and 60 min intervals respectively. These records are made available through the SASSCAL WeatherNet, an online platform providing near-real time data as well as various statistics and graphics, all in open access. This effort is complemented by the harmonization and improvement of climate data management concepts at the national weather authorities, capacity building activities and an extension of the data bases with historical climate data which are still available from different sources. These activities are performed through cooperation between regional and German institutions and will provide important information for climate service related activities

The potential of marginal coastal nursery habitats for the conservation of a culturally important Caribbean marine species

Aim: Identifying the potential of marginal habitats for species conservation is of key importance when their core high-quality habitats are under substantial disturbances and threats. However, there is currently a knowledge gap on how useful marine marginal habitats may be for conserving endangered marine species. Here, we investigate the potential of groundwater-fed coastal areas for the conservation of the queen conch, an economically and culturally important marine gastropod. Location: The inlet of Xel-Ha, typical of groundwater-fed coastal areas widely distributed along the Yucatan Peninsula coast in Mexico and partially protected by a network of marine protected areas. Methods: We tracked 66 queen conchs (Lobatus gigas) using acoustic telemetry over a period of 3.5 years. We investigated for ontogenetic niche shift using a network analysis and by modelling their growth. Results: The queen conchs exhibited the same ontogenetic niche shift required to complete their life cycle in this marginal habitat as they do in offshore core habitats. A total of 33 individuals departed the inlet and migrated from shallow groundwater-affected nursery grounds to deeper marine habitats more suitable for breeding aggregation. Main conclusions: As the broad-scale movement behaviour of queen conch in this inlet is similar to that observed on the overfished core habitats, our findings suggest that groundwater-fed coastal areas should be included in conservation planning for an effective management of this species within a network of marine protected areas

Genetic relatedness of infecting and reinfecting respiratory syncytial virus strains identified in a birth cohort from rural Kenya

Background: Respiratory syncytial virus (RSV) reinfects individuals repeatedly. The extent to which this is a consequence of RSV antigenic diversity is unclear. Methods: Six-hundred thirty-five children from rural Kenya were closely monitored for RSV infection from birth through 3 consecutive RSV epidemics. RSV infections were identified by immunofluorescence testing of nasal washing samples collected during acute respiratory illnesses, typed into group A and B, and sequenced in the attachment (G) protein. A positive sample separated from a previous positive by ≥14 days was defined as a reinfection a priori. Results: Phylogenetic analysis was undertaken for 325 (80%) of 409 identified infections, including 53 (64%) of 83 reinfections. Heterologous group reinfections were observed in 28 episodes, and homologous group reinfections were observed in 25 episodes; 10 involved homologous genotypes, 5 showed no amino acid changes, and 3 were separated by 21–24 days and were potentially persistent infections. The temporal distribution of genotypes among reinfections did not differ from that of single infections. Conclusions: The vast majority of infection and reinfection pairs differed by group, genotype, or G amino acid sequence (ie, comprised distinct viruses). The extent to which this is a consequence of immune memory of infection history or prevalent diversity remains unclear

Including information about co-morbidity in estimates of disease burden: results from the World Health Organization World Mental Health Surveys

Background The methodology commonly used to estimate disease burden, featuring ratings of severity of individual conditions, has been criticized for ignoring co-morbidity. A methodology that addresses this problem is proposed and illustrated here with data from the World Health Organization World Mental Health Surveys. Although the analysis is based on self-reports about one's own conditions in a community survey, the logic applies equally well to analysis of hypothetical vignettes describing co-morbid condition profiles. Method Face-to-face interviews in 13 countries (six developing, nine developed; n=31 067; response rate=69.6%) assessed 10 classes of chronic physical and nine of mental conditions. A visual analog scale (VAS) was used to assess overall perceived health. Multiple regression analysis with interactions for co-morbidity was used to estimate associations of conditions with VAS. Simulation was used to estimate condition-specific effects. Results The best-fitting model included condition main effects and interactions of types by numbers of conditions. Neurological conditions, insomnia and major depression were rated most severe. Adjustment for co-morbidity reduced condition-specific estimates with substantial between-condition variation (0.24-0.70 ratios of condition-specific estimates with and without adjustment for co-morbidity). The societal-level burden rankings were quite different from the individual-level rankings, with the highest societal-level rankings associated with conditions having high prevalence rather than high individual-level severity. Conclusions Plausible estimates of disorder-specific effects on VAS can be obtained using methods that adjust for co-morbidity. These adjustments substantially influence condition-specific rating

Design and Bolometer Characterization of the SPT-3G First-year Focal Plane

During the austral summer of 2016-17, the third-generation camera, SPT-3G, was installed on the South Pole Telescope, increasing the detector count in the focal plane by an order of magnitude relative to the previous generation. Designed to map the polarization of the cosmic microwave background, SPT-3G contains ten 6-in-hexagonal modules of detectors, each with 269 trichroic and dual-polarization pixels, read out using 68x frequency-domain multiplexing. Here we discuss design, assembly, and layout of the modules, as well as early performance characterization of the first-year array, including yield and detector properties.Comment: Conference proceeding for Low Temperature Detectors 2017. Accepted for publication: 27 August 201

Phylogeny.fr: robust phylogenetic analysis for the non-specialist

Phylogenetic analyses are central to many research areas in biology and typically involve the identification of homologous sequences, their multiple alignment, the phylogenetic reconstruction and the graphical representation of the inferred tree. The Phylogeny.fr platform transparently chains programs to automatically perform these tasks. It is primarily designed for biologists with no experience in phylogeny, but can also meet the needs of specialists; the first ones will find up-to-date tools chained in a phylogeny pipeline to analyze their data in a simple and robust way, while the specialists will be able to easily build and run sophisticated analyses. Phylogeny.fr offers three main modes. The ‘One Click’ mode targets non-specialists and provides a ready-to-use pipeline chaining programs with recognized accuracy and speed: MUSCLE for multiple alignment, PhyML for tree building, and TreeDyn for tree rendering. All parameters are set up to suit most studies, and users only have to provide their input sequences to obtain a ready-to-print tree. The ‘Advanced’ mode uses the same pipeline but allows the parameters of each program to be customized by users. The ‘A la Carte’ mode offers more flexibility and sophistication, as users can build their own pipeline by selecting and setting up the required steps from a large choice of tools to suit their specific needs. Prior to phylogenetic analysis, users can also collect neighbors of a query sequence by running BLAST on general or specialized databases. A guide tree then helps to select neighbor sequences to be used as input for the phylogeny pipeline. Phylogeny.fr is available at: http://www.phylogeny.fr