How to create new subduction zones: A global perspective

The association of deep-sea trenches—steeply angled, planar zones where earthquakes occur deep into Earth’s interior—and chains, or arcs, of active, explosive volcanoes had been recognized for 90 years prior to the development of plate tectonic theory in the 1960s. Oceanic lithosphere is created at mid-ocean ridge spreading centers and recycled into the mantle at subduction zones, where down-going lithospheric plates dynamically sustain the deep-sea trenches. Study of subduction zone initiation is a challenge because evidence of the processes involved is typically destroyed or buried by later tectonic and crust-forming events. In 2014 and 2017, the International Ocean Discovery Program (IODP) specifically targeted these processes with three back-to-back expeditions to the archetypal Izu-Bonin-Mariana (IBM) intra-oceanic arcs and one expedition to the Tonga-Kermadec (TK) system. Both subduction systems were initiated ~52 million years ago, coincident with a proposed major change of Pacific plate motion. These expeditions explored the tectonism preceding and accompanying subduction initiation and the characteristics of the earliest crust-forming magmatism. Lack of compressive uplift in the overriding plate combined with voluminous basaltic seafloor magmatism in an extensional environment indicates a large component of spontaneous subduction initiation was involved for the IBM. Conversely, a complex range of far-field uplift and depression accompanied the birth of the TK system, indicative of a more distal forcing of subduction initiation. Future scientific ocean drilling is needed to target the three-dimensional aspects of these processes at new converging margins

How to Create New Subduction Zones: A Global Perspective

The association of deep-sea trenches—steeply angled, planar zones where earthquakes occur deep into Earth’s interior—and chains, or arcs, of active, explosive volcanoes had been recognized for 90 years prior to the development of plate tectonic theory in the 1960s. Oceanic lithosphere is created at mid-ocean ridge spreading centers and recycled into the mantle at subduction zones, where down-going lithospheric plates dynamically sustain the deep-sea trenches. Study of subduction zone initiation is a challenge because evidence of the processes involved is typically destroyed or buried by later tectonic and crust-forming events. In 2014 and 2017, the International Ocean Discovery Program (IODP) specifically targeted these processes with three back-to-back expeditions to the archetypal Izu-Bonin-Mariana (IBM) intra-oceanic arcs and one expedition to the Tonga-Kermadec (TK) system. Both subduction systems were initiated ~52 million years ago, coincident with a proposed major change of Pacific plate motion. These expeditions explored the tectonism preceding and accompanying subduction initiation and the characteristics of the earliest crust-forming magmatism. Lack of compressive uplift in the overriding plate combined with voluminous basaltic seafloor magmatism in an extensional environment indicates a large component of spontaneous subduction initiation was involved for the IBM. Conversely, a complex range of far-field uplift and depression accompanied the birth of the TK system, indicative of a more distal forcing of subduction initiation. Future scientific ocean drilling is needed to target the three-dimensional aspects of these processes at new converging margins

How to Create New Subduction Zones: A Global Perspective

The association of deep-sea trenches—steeply angled, planar zones where earthquakes occur deep into Earth’s interior—and chains, or arcs, of active, explosive volcanoes had been recognized for 90 years prior to the development of plate tectonic theory in the 1960s. Oceanic lithosphere is created at mid-ocean ridge spreading centers and recycled into the mantle at subduction zones, where down-going lithospheric plates dynamically sustain the deep-sea trenches. Study of subduction zone initiation is a challenge because evidence of the processes involved is typically destroyed or buried by later tectonic and crust-forming events. In 2014 and 2017, the International Ocean Discovery Program (IODP) specifically targeted these processes with three back-to-back expeditions to the archetypal Izu-Bonin-Mariana (IBM) intra-oceanic arcs and one expedition to the Tonga-Kermadec (TK) system. Both subduction systems were initiated ~52 million years ago, coincident with a proposed major change of Pacific plate motion. These expeditions explored the tectonism preceding and accompanying subduction initiation and the characteristics of the earliest crust-forming magmatism. Lack of compressive uplift in the overriding plate combined with voluminous basaltic seafloor magmatism in an extensional environment indicates a large component of spontaneous subduction initiation was involved for the IBM. Conversely, a complex range of far-field uplift and depression accompanied the birth of the TK system, indicative of a more distal forcing of subduction initiation. Future scientific ocean drilling is needed to target the three-dimensional aspects of these processes at new converging margins

Low-cost electronic sensors for environmental research: pitfalls and opportunities

Repeat observations underpin our understanding of environmental processes, but financial constraints often limit scientists’ ability to deploy dense networks of conventional commercial instrumentation. Rapid growth in the Internet-Of-Things (IoT) and the maker movement is paving the way for low-cost electronic sensors to transform global environmental monitoring. Accessible and inexpensive sensor construction is also fostering exciting opportunities for citizen science and participatory research. Drawing on 6 years of developmental work with Arduino-based open-source hardware and software, extensive laboratory and field testing, and incor- poration of such technology into active research programmes, we outline a series of successes, failures and lessons learned in designing and deploying environmental sensors. Six case studies are presented: a water table depth probe, air and water quality sensors, multi-parameter weather stations, a time-sequencing lake sediment trap, and a sonic anemometer for monitoring sand transport. Schematics, code and purchasing guidance to reproduce our sensors are described in the paper, with detailed build instructions hosted on our King’s College London Geography Environmental Sensors Github repository and the FreeStation project website. We show in each case study that manual design and construction can produce research-grade scientific instrumentation (mean bias error for calibrated sensors –0.04 to 23%) for a fraction of the conventional cost, provided rigorous, sensor-specific calibration and field testing is conducted. In sharing our collective experiences with build-it- yourself environmental monitoring, we intend for this paper to act as a catalyst for physical geographers and the wider environmental science community to begin incorporating low-cost sensor development into their research activities. The capacity to deploy denser sensor networks should ultimately lead to superior envi- ronmental monitoring at the local to global scales

Volcaniclastic sandstones record the influence of subducted Pacific MORB on magmatism at the early Izu-Bonin arc

The remnant rear-arc segment of the early Izu-Bonin arc, known as the Kyushu-Palau Ridge (KPR), is a key location where magmatic outputs can be constrained during the lifetime of an island arc. We present new geochemical data for coarse-grained basaltic to andesitic volcaniclastic sandstones derived from the KPR and deposited in the Amami Sankaku Basin (IODP Site U1438, Unit III rocks) in the time period 40–30 Ma. Bulk disaggregated and cleaned volcaniclastic sandstones of Unit III at Site U1438 retain primary magmatic signatures and can be used to infer the evolution of magmatic sources of the juvenile Izu-Bonin island arc through time. A sharp increase of slab-derived components to the source of KPR magmatism developed at about 35 Ma, indicated by increasing Th/La and decreasing Sm/La, Yb/Hf and Nb/Nd. Systematic variations in trace element ratios and increasing trace element abundances in younger samples through the 40–30 Ma time window are decoupled from Hf-Nd isotope ratios, which are measurably more depleted (εHf = 16.5–15, εNd = 9.6–8.2) than boninites produced during the preceding magmatic phase and sampled in the modern Izu-Bonin forearc. Hafnium isotopic compositions in the Unit III sandstones remain little-changed and similar to the subducting Pacific Plate after 40 Ma and do not revert to highly radiogenic compositions of the Indian-type MORB mantle wedge which is reflected in highly-depleted basalts produced at Site U1438 and in the forearc (commonly εHf ≥ 18.0). The overall pattern recorded in Unit III sandstones indicates that the Pacific-type MORB slab-melt component, which was present in the preceding boninite phase of magmatism, persisted after 40 Ma, while the subducted sediment component in the boninite source was lost or significantly reduced. Variations in trace element ratios (at constant εNd and near-constant and radiogenic εHf) and in high field strength element abundances of the early Izu Bonin arc are controlled by the addition of a subducted Pacific MORB melt or supercritical fluid to the mantle wedge. A subducted MORB (slab melt) component is thus sampled throughout the early life of the Izu-Bonin arc and in the currently active Izu-Bonin arc-backarc system

Acetate Promotes T Cell Effector Function during Glucose Restriction.

Competition for nutrients like glucose can metabolically restrict T cells and contribute to their hyporesponsiveness during cancer. Metabolic adaptation to the surrounding microenvironment is therefore key for maintaining appropriate cell function. For instance, cancer cells use acetate as a substrate alternative to glucose to fuel metabolism and growth. Here, we show that acetate rescues effector function in glucose-restricted CD8+ T cells. Mechanistically, acetate promotes histone acetylation and chromatin accessibility and enhances IFN-γ gene transcription and cytokine production in an acetyl-CoA synthetase (ACSS)-dependent manner. Ex vivo acetate treatment increases IFN-γ production by exhausted T cells, whereas reducing ACSS expression in T cells impairs IFN-γ production by tumor-infiltrating lymphocytes and tumor clearance. Thus, hyporesponsive T cells can be epigenetically remodeled and reactivated by acetate, suggesting that pathways regulating the use of substrates alternative to glucose could be therapeutically targeted to promote T cell function during cancer

Subduction initiation and ophiolite crust: new insights from IODP drilling

International Ocean Discovery Program (IODP) Expedition 352 recovered a high-fidelity record of volcanism related to subduction initiation in the Bonin fore-arc. Two sites (U1440 and U1441) located in deep water nearer to the trench recovered basalts and related rocks; two sites (U1439 and U1442) located in shallower water further from the trench recovered boninites and related rocks. Drilling in both areas ended in dolerites inferred to be sheeted intrusive rocks. The basalts apparently erupted immediately after subduction initiation and have compositions similar to those of the most depleted basalts generated by rapid sea-floor spreading at mid-ocean ridges, with little or no slab input. Subsequent melting to generate boninites involved more depleted mantle and hotter and deeper subducted components as subduction progressed and volcanism migrated away from the trench. This volcanic sequence is akin to that recorded by many ophiolites, supporting a direct link between subduction initiation, fore-arc spreading, and ophiolite genesis

Missing western half of the Pacific Plate: Geochemical nature of the Izanagi-Pacific Ridge interaction with a stationary boundary between the Indian and Pacific mantles

The source mantle of the basaltic ocean crust on the western half of the Pacific Plate was examined using Pb–Nd–Hf isotopes. The results showed that the subducted Izanagi–Pacific Ridge (IPR) formed from both Pacific (180–∼80 Ma) and Indian (∼80–70 Ma) mantles. The western Pacific Plate becomes younger westward and is thought to have formed from the IPR. The ridge was subducted along the Kurile–Japan–Nankai–Ryukyu (KJNR) Trench at 60–55 Ma and leading edge of the Pacific Plate is currently stagnated in the mantle transition zone. Conversely, the entire eastern half of the Pacific Plate, formed from isotopically distinct Pacific mantle along the East Pacific Rise and the Juan de Fuca Ridge, largely remains on the seafloor. The subducted IPR is inaccessible; therefore, questions regarding which mantle might be responsible for the formation of the western half of the Pacific Plate remain controversial. Knowing the source of the IPR basalts provides insight into the Indian–Pacific mantle boundary before the Cenozoic. Isotopic compositions of the basalts from borehole cores (165–130 Ma) in the western Pacific show that the surface oceanic crust is of Pacific mantle origin. However, the accreted ocean floor basalts (∼80–70 Ma) in the accretionary prism along the KJNR Trench have Indian mantle signatures. This indicates the younger western Pacific Plate of IPR origin formed partly from Indian mantle and that the Indian–Pacific mantle boundary has been stationary in the western Pacific at least since the Cretaceous

The evolution of the Izu Bonin - Mariana volcanic arcs (NW Pacific) in terms of major element chemistry

[1] New and published analyses of major element oxides (SiO2, TiO2, Al2O3, FeO*, MnO, MgO, CaO, K2O, Na2O and P2O5) from the central Izu Bonin and Mariana arcs (IBM) were compiled in order to investigate the evolution of the IBM in terms of major elements since arc inception at ∼49 million years ago. The database comprises ∼3500 volcanic glasses of distal tephra fallout and ∼500 lava samples, ranging from the Quaternary to mid-Eocene in age. The data were corrected to 4 wt% MgO in order to display the highly resolved temporal trends. These trends show that the IBM major elements have always been “arc-like” and clearly distinct from N-MORB. Significant temporal variations of some major element oxides are apparent. The largest variations are displayed by K4.0. The data support a model wherein the K2O variability is caused by the addition of slab component with strongly differing K2O contents to a fairly depleted subarc mantle; variable extents of melting, or mantle heterogeneity, appear to play a negligible role. The other major element oxides are controlled by the composition and processes of the subarc mantle wedge. The transition from the boninitic and tholeiitic magmatism of the Eocene and Oligocene to the exclusively tholeiitic magmatism of the Neogene IBM is proposed to reflect a change in the composition of the subarc mantle wedge. The early boninitic magmas originate from an ultra-depleted subarc mantle, that is residual to either the melting of E-MORB mantle, or of subcontinental lithospheric mantle. During the Eocene and Oligocene, this residual mantle is gradually replaced by Indian MORB mantle advected from the backarc regions. The Indian MORB mantle is more radiogenic in Nd isotope ratios but also more fertile with respect to major and trace elements. Therefore the Neogene tholeiites have higher Al2O3 and TiO2 contents and lower mg# numbers at given SiO2 content. After the subarc mantle replacement was complete in the late Oligocene or early Miocene, the Neogene IBM entered a “steady state” that is characterized by the continuous advection of Indian MORB mantle from the reararc, which is fluxed by fluids and melt components from slab. The thickness of the IBM crust must have grown with time, but any effects of crustal thickening on the major element chemistry of the IBM magmas appear to be minor relative to the compositional changes that are related to source composition. Therefore next to the processes of melting, the composition of the mantle sources must play a major role in creating substantiative heterogeneities in the major element chemistry of the arc crust