Cyclohexanedione as the negative electrode reaction for organic redox flow batteries

The electrochemical reduction and oxidation of cyclohexanedione is evaluated for the first time as the negative electrode reaction in an organic redox flow battery. Electrochemical characterization indicates that the redox reaction of cyclohexanedione is a proton-coupled electron transfer process with quasi-reversible behavior in acidic media (pH 2 M) and exhibit reduction process with up to 4 electrons transferred

Microwave irradiation synthesis to obtain La0.7-xPrxCa0.3MnO3 perovskites : electrical and electrochemical performance

Atzin Ferrel is grateful for her grants from CONACYT and SIP- IPN. The authors also appreciate the financial support provided by the Consejo Nacional de Ciencia y Tecnología (CONACYT), México, Comisión de Operación y Fomento de Actividades Académicas del IPN (COFAA), México and Secretaría de Investigación y Posgrado (SIP) of the Instituto Politécnico Nacional (IPN) México through the CB2015–252181, 20201278, 20201279, 20201280, 20202443 and 20200909 projects as well as the SNI-CONACyT.La0.7-xPrxCa0.3MnO3 (LPCM) perovskites previously synthesized by the microwave-assisted method at 4 min and with different stoichiometry (x = 0.35, 0.52 and 0.63) were evaluated through thermogravimetric analysis (TGA), electrical conductivity, thermal expansion coefficient (TEC), scanning electron microscopy (SEM), Brunauer- Emmet- Teller (BET) analysis and electrochemical impedance spectroscopy (EIS) using yttria stabilized zirconia (YSZ) as an electrolyte. The results are discussed in terms of the potential as cathode material to be applied in solid oxide fuel cells (SOFCs) applications at temperatures from 600 to 800 °C. Results derived from TGA showed that Pr promotes the uncoupling oxygen and oxygen vacancies favoring the fuel combusting. Also, TEC analysis revealed adequate stability between the YSZ electrolyte and the La0.7-xPrxCa0.3MnO3 to avoid cracking or failing, especially with high amount of Pr. The transition in morphology from irregular to regular shapes improves the BET and Barret- Joyner- Halenda (BJH) surfaces and promotes the triple phase boundary (TPB) connectivity. The electrical conductivity correlated to the availability in oxygen vacancies showed maximum conductivities in the order of 10−2 S cm−1. Activation energy (Ea) was found to be reduced with a minimum quantity of Pr (0.071 eV). EIS results indicate that the oxygen vacancies in the LPCM/YSZ system were better promoted with the highest amount of Pr = 0.63 (η = 0.9 V, 800 °C and 0.06 V of amplitude) in comparison with the minimum, Pr = 0.35 (η = 1.2 V, 800 °C and 0.06 V of amplitude).PostprintPeer reviewe

Electrophysiological and behavioral activity of (E)-2-hexenal in the granary weevil and its application in food packaging.

The purpose of this work was to develop a biodegradable carrier material to control insect pests in cereal products. To this aim, (E)-2-hexenal was used, being a natural compound with antimicrobial activity that is also commonly adopted as a flavoring agent. Three coating layers of polycaprolactone (PCL) were spread onto the internal side of a paperboard carton, the first being the active coating containing (E)-2-hexenal. The antennal sensitivity of Sitophilus granarius to a broad range of doses of (E)-2-hexenal was first demonstrated. Next, the ability of different concentrations of this compound to disrupt the orientation of adult S. granarius beetles to odors of intact wheat kernels was established in a two-choice pitfall bioassay. In addition, invasion tests were carried out over an 8-week period to highlight the effects of the biobased repellent packaging and their potential persistence. The results demonstrated that during the entire monitoring period, the percentage of S. granarius adults found in cartons coated with (E)-2-hexenal-loaded multilayer PCL was about 10 % of the total number of insects used in the bioassay, very low compared with the respective control samples, thus assessing both the effectiveness and persistence of the repellent system developed. Although the infestation level of treated packages was reduced relative to the infestation levels in the controls, any infestation of food packages is unacceptable to consumers, so further tests are required to determine whether infestation can be completely prevented using (E)-2-hexenal

Experimental data in support of characterization of the CePO4 dispersion into transparent PMMA/PU IPNs by the sequential route

© 2018 This article is focused on the complementary data referring to the article “Dispersion of upconverting nanostructures of CePO4 using rod and semi-spherical morphologies into transparent PMMA/PU IPNs by the sequential route”. It contains the XPS data of CePO4 photographs and DSC thermograms of transparent PMMA/PU IPNs as well as with CePO4 dispersed in different wt.%, Confocal laser scanning micrographs, transmission electron microscopy (TEM), optical images of surface, and visual inspection (photographs) before and after aging of hybrid materials

Dispersion of upconverting nanostructures of CePO4 using rod and semi-spherical morphologies into transparent PMMA/PU IPNs by the sequential route

Upconverting luminescent poly (methylmethacrylate) (PMMA)/poly (urethane) (PU) interpenetrating polymer network (IPN) nanohybrids were prepared using a sequential polymerisation incorporating different wt.% of cerium phosphate (CePO 4 ) nanoparticles. The effect of miscibility/compatibility of the different PMMA/PU ratios, the addition and dispersion of rod and semi-spherical nanostructures in as well as the performance of selected IPNs under accelerated aging were studied using morphological, emission, thermal and mechanical studies. Structural studies revealed that there were physical interactions between C[dbnd]O groups and CePO 4 in PMMA/PU IPNs. The addition of a higher wt.% of nanostructures was found to decrease the transparency of the IPNs. Resulting PMMA/PU/CePO 4 IPN nanohybrids are photoluminescent under UV-light, supporting the prolongate of lifetime while maintaining the mechanical properties after being subjected to accelerated weathering. The addition of semi-spherical particles resulted in a more stable materials after accelerated weathering than nanorods

Diseño, construcción y montaje del telescopio de 600 mm del Observatorio Astronómico de Mercedes

Se revén las consideraciones que llevaron a adoptar el sistema de horquilla de fundición de aluminio tomando como parámetro la rigidez, el peso y el costo de ese material. Se describe en detalle la celda del espejo primario, la suspensión de éste, el movimiento polar, el sistema de relojería por motor sincrónico con fuente generadora de tensión estabilizada en frecuencias con 1 conjunto diferencial y motor asimétrico para los movimientos rápidos y el control de posición.Asociación Argentina de Astronomí

Thin-Film Metamaterials called Sculptured Thin Films

Morphology and performance are conjointed attributes of metamaterials, of which sculptured thin films (STFs) are examples. STFs are assemblies of nanowires that can be fabricated from many different materials, typically via physical vapor deposition onto rotating substrates. The curvilinear--nanowire morphology of STFs is determined by the substrate motions during fabrication. The optical properties, especially, can be tailored by varying the morphology of STFs. In many cases prototype devices have been fabricated for various optical, thermal, chemical, and biological applications.Comment: to be published in Proc. ICTP School on Metamaterials (Augsut 2009, Sibiu, Romania

Integrated computer-aided working-fluid design and thermoeconomic ORC system optimisation

The successful commercialisation of organic Rankine cycle (ORC) systems across a range of power outputs and heat-source temperatures demands step-changes in both improved thermodynamic performance and reduced investment costs. The former can be achieved through high-performance components and optimised system architectures operating with novel working-fluids, whilst the latter requires careful component-technology selection, economies of scale, learning curves and a proper selection of materials and cycle configurations. In this context, thermoeconomic optimisation of the whole power-system should be completed aimed at maximising profitability. This paper couples the computer-aided molecular design (CAMD) of the working-fluid with ORC thermodynamic models, including recuperated and other alternative (e.g., partial evaporation or trilateral) cycles, and a thermoeconomic system assessment. The developed CAMD-ORC framework integrates an advanced molecular-based group-contribution equation of state, SAFT-γ Mie, with a thermodynamic description of the system, and is capable of simultaneously optimising the working-fluid structure, and the thermodynamic system. The advantage of the proposed CAMD-ORC methodology is that it removes subjective and pre-emptive screening criteria that would otherwise exist in conventional working-fluid selection studies. The framework is used to optimise hydrocarbon working-fluids for three different heat sources (150, 250 and 350 °C, each with mcp = 4.2 kW/K). In each case, the optimal combination of working-fluid and ORC system architecture is identified, and system investment costs are evaluated through component sizing models. It is observed that optimal working fluids that minimise the specific investment cost (SIC) are not the same as those that maximise power output. For the three heat sources the optimal working-fluids that minimise the SIC are isobutane, 2-pentene and 2-heptene, with SICs of 4.03, 2.22 and 1.84 £/W respectively

Mesenchymal stem cells from patients with chronic myeloid leukemia do not express BCR-ABL and have absence of chimerism after allogeneic bone marrow transplant

Bone marrow is a heterogeneous cell population which includes hematopoietic and mesenchymal progenitor cells. Dysregulated hematopoiesis occurs in chronic myelogenous leukemia (CML), being caused at least in part by abnormalities in the hematopoietic progenitors. However, the role of mesenchymal stem cells (MSCs) in CML has not been well characterized. The objectives of the present study were to observe the biological characteristics of MSCs from CML patients and to determine if MSCs originate in part from donors in CML patients after bone marrow transplantation (BMT). We analyzed MSCs from 5 untreated patients and from 3 CML patients after sex-mismatched allogeneic BMT. Flow cytometry analysis revealed the typical MSC phenotype and in vitro assays showed ability to differentiate into adipocytes and osteoblasts. Moreover, although some RT-PCR data were contradictory, combined fluorescence in situ hybridization analysis showed that MSCs from CML patients do not express the bcr-abl gene. Regarding MSCs of donor origin, although it is possible to detect Y target sequence by nested PCR, the low frequency (0.14 and 0.34%) of XY cells in 2 MSC CML patients by fluorescence in situ hybridization analysis suggests the presence of contaminant hematopoietic cells and the absence of host-derived MSCs in CML patients. Therefore, we conclude that MSCs from CML patients express the typical MSC phenotype, can differentiate into osteogenic and adipogenic lineages and do not express the bcr-abl gene. MSCs cannot be found in recipients 12 to 20 months after BMT. The influence of MSCs on the dysregulation of hematopoiesis in CML patients deserves further investigation

Self-reported drinking and driving amongst educated adults in Spain: The "Seguimiento Universidad de Navarra" (SUN) cohort findings

Background: The role of alcohol as a risk factor for motor vehicle crashes is long known. Yet, reports on the prevalence of drinking and driving suggest values between 20%–30% when the adult driving population is interviewed. We wondered whether these values hold true among European educated citizens and whether there are any significant differences in prevalence by age, gender, type of profession and other lifestyle indicators. Methods: Cross-sectional analyses of baseline data from a cohort of university graduates in Spain (SUN study). Answered questionnaires contained items on current drinking and driving practices, together with data on socio-demographic characteristics and lifestyle habits. Chi square, Fisher test, and multivariate logistic regression were used to investigate the impact of several variables on drinking and driving practices. Analyses were stratified by gender. Results: Almost 30% of the participants reported "sometimes" drinking and driving. This percent increased to 47% when "almost never" was also included as a positive answer to the drinking and driving practice question. These percentages varied significantly by gender, with up to 64% of men reporting "sometimes" or "almost never" vs. 36% of women doing so. Drinking and driving practices also differed by overall alcohol consumption habits, smoking, use of safety belts, and notably, type of profession. Conclusion: Our findings are amongst the first on the high prevalence of drinking and driving among Spanish. Particularly worrisome is the fact that health professionals reported this habit even at higher rates. Multidisciplinary interventions (e.g., legal, educational, economic) are needed to reduce this serious health risk