Crack propagation and fracture in silicon wafers under thermal stress

The behaviour of microcracks in silicon during thermal annealing has been studied using in situ X-ray diffraction imaging. Initial cracks are produced with an indenter at the edge of a conventional Si wafer, which was heated under temperature gradients to produce thermal stress. At temperatures where Si is still in the brittle regime, the strain may accumulate if a microcrack is pinned. If a critical value is exceeded either a new or a longer crack will be formed, which results with high probability in wafer breakage. The strain reduces most efficiently by forming (hhl) or (hkl) crack planes of high energy instead of the expected low-energy cleavage planes like {111}. Dangerous cracks, which become active during heat treatment and may shatter the whole wafer, can be identified from diffraction images simply by measuring the geometrical dimensions of the strain-related contrast around the crack tip. Once the plastic regime at higher temperature is reached, strain is reduced by generating dislocation loops and slip bands and no wafer breakage occurs. There is only a small temperature window within which crack propagation is possible during rapid annealing

Observation of nano-indent induced strain fields and dislocation generation in silicon wafers using micro-raman spectroscopy and white beam x-ray topography

In the semiconductor manufacturing industry, wafer handling introduces micro-cracks at the wafer edge. During heat treatment these can produce larger, long-range cracks in the wafer which can cause wafer breakage during manufacture. Two complimentary techniques, micro-Raman spectroscopy (μRS) and White Beam Synchrotron X-ray Topography (WBSXRT) were employed to study both the micro-cracks and the associated strain fields produced by nano-indentations in Si wafers, which were used as a means of introducing controlled strain in the wafers. It is shown that both the spatial lateral and depth distribution of these long range strain fields are relatively isotropic in nature. The Raman spectra suggest the presence of a region under tensile strain beneath the indents, which can indicate a crack beneath the indent and the data strongly suggests that there exists a minimum critical applied load below which cracking will not initiate

Deposition of earth-abundant p-type CuBr films with high hole conductivity and realization of p-CuBr/n-Si heterojunction solar cell

We present details of the deposition of transparent and earth-abundant p-type CuBr films with high hole conductivity and the fabrication and characterization of a prototype solar cell based on p-CuBr/n-Si heterojunctions. p-type CuBr films with typical resistivities and hole concentrations of 7×10-1 Ωcm and 7.5×1019 cm-3, respectively, are deposited by thermal evaporation followed by oxygen plasma treatment. The transparent p-type films show strong room temperature photoluminescence at ~2.97 eV. The current voltage (I-V) characteristics of the heterojunctions show good diode behaviour. Power conversion efficiency of ~ 2 % was achieved for the heterojunction device without any optimization of the cell structure under AM 1.5 illumination condition with a short circuit current (Jsc) and open circuit voltage (Voc) of 13.2 mA/cm2 and 0.44 V, respectively

Manipulating Permeability as a Process for Controlling Crime: Balancing Security and Sustainability in Local Contexts

In response to the sustainability agenda, planning policy in the UK, USA and Australia has shifted to promote compact, high-density, mixed-used residential developments in walkable and permeable street networks close to public transport (Commonwealth of Australia, 1995; DETR, 1998; American Planning Association, 2007). This is to encourage walking and the use of public transport and to reduce car-use, energy use, pollution, congestion and urban sprawl. However, although permeability is assumed to represent a positive built environment feature which reduces crime by promoting more "eyes on the street" (Jacobs, 1961), a significant body of research in the field of environmental criminology challenges this assumptions. This paper reviews the theories and evidence associated with permeability and crime.Pedestrian access ways (PAWs) are often associated with crime and this paper discusses research which was directed at providing practical guidance to local governments on how they could better manage existing PAWs in Western Australia (WA). A morphological analysis of existing PAWs was undertaken which analysed the purposes, roles, functionality, users and dynamics of PAWs in a variety of different settings. In addition to crime (which had commonly be used as an excuse to close PAWs), the research considered issues such as amenity, walkability, equity and sustainability. A suite of five tools for assessing and reducing crime risk were developed, which attempt to balance security and sustainability issues. Contrary to assumptions, most PAWs were not subject to high levels of crime and many were vital to the community. Intriguingly, findings indicated that neighbourhood permeability can potentially be manipulated (via the management, closure or construction of new PAWs) to achieve the desired outcomes of reducing crime and of enhancing walkability, liveability and ultimately, the sustainability and well-being of communities

Growth of n-type γ-CuCl with improved carrier concentration by pulsed dc sputtering: structural, electronic and UV emission properties

Copper (I) chloride is naturally a direct band gap, zincblende and p-type semiconductor material with much potential in linear and non-linear optical applications owing to its large free excitonic binding energy. In order to fabricate an efficient electrically pumped emitter, a combination of both p-type and n-type semiconductor materials will be required. In this study, we report on the growth of n-type γ-CuCl with improved carrier concentration by pulsed dc magnetron sputtering of CuCl/Zn target. An improvement of carrier concentration up to an order of ~ 9.8x1018 cm-3, which is much higher than the previously reported (~ 1016 cm-3), has been achieved. An enhancement in crystallinity of CuCl along the (111) orientation and its consistency with the morphological studies have also been investigated as an effect of doping. Influence of Zn wt % in the sputtering target on the Hall mobility and resistivity of the doped films is explored. The strong ultraviolet emission of doped films is confirmed using room temperature and low temperature photoluminescence studies

The evolution of plasmid stability: Are infectious transmission and compensatory evolution competing evolutionary trajectories?

Conjugative plasmids are widespread and play an important role in bacterial evolution by accelerating adaptation through horizontal gene transfer. However, explaining the long-term stability of plasmids remains challenging because segregational loss and the costs of plasmid carriage should drive the loss of plasmids though purifying selection. Theoretical and experimental studies suggest two key evolutionary routes to plasmid stability: First, the evolution of high conjugation rates would allow plasmids to survive through horizontal transmission as infectious agents, and second, compensatory evolution to ameliorate the cost of plasmid carriage can weaken purifying selection against plasmids. How these two evolutionary strategies for plasmid stability interact is unclear. Here, we summarise the literature on the evolution of plasmid stability and then use individual based modelling to investigate the evolutionary interplay between the evolution of plasmid conjugation rate and cost amelioration. We find that, individually, both strategies promote plasmid stability, and that they act together to increase the likelihood of plasmid survival. However, due to the inherent costs of increasing conjugation rate, particularly where conjugation is unlikely to be successful, our model predicts that amelioration is the more likely long-term solution to evolving stable bacteria-plasmid associations. Our model therefore suggests that bacteria-plasmid relationships should evolve towards lower plasmid costs that may forestall the evolution of highly conjugative, 'infectious' plasmids

Galaxy Clusters Associated with Short GRBs. II. Predictions for the Rate of Short GRBs in Field and Cluster Early-Type Galaxies

We determine the relative rates of short GRBs in cluster and field early-type galaxies as a function of the age probability distribution of their progenitors, P(\tau) \propto \tau^n. This analysis takes advantage of the difference in the growth of stellar mass in clusters and in the field, which arises from the combined effects of the galaxy stellar mass function, the early-type fraction, and the dependence of star formation history on mass and environment. This approach complements the use of the early- to late-type host galaxy ratio, with the added benefit that the star formation histories of early-type galaxies are simpler than those of late-type galaxies, and any systematic differences between progenitors in early- and late-type galaxies are removed. We find that the ratio varies from R(cluster)/R(field) ~ 0.5 for n = -2 to ~ 3 for n = 2. Current observations indicate a ratio of about 2, corresponding to n ~ 0 - 1. This is similar to the value inferred from the ratio of short GRBs in early- and late-type hosts, but it differs from the value of n ~ -1 for NS binaries in the Milky Way. We stress that this general approach can be easily modified with improved knowledge of the effects of environment and mass on the build-up of stellar mass, as well as the effect of globular clusters on the short GRB rate. It can also be used to assess the age distribution of Type Ia supernova progenitors.Comment: ApJ accepted versio