Manufacturing strategy issues in selected Indian manufacturing industry

This paper presents some findings of Indian manufacturing sectors viz. automobile (especially two-wheeler), tractor and general manufacturing industry. Various manufacturing strategy issues such as competitive priorities, improvement activities, and performance measures, have been identified and assessed in Indian context. Sector wise comparison of competitive priorities, improvement activities i.e. advanced manufacturing technology (AMT), integrated information systems (IIS), and advanced management systems (AMS), and performance measure, is provided. Our results showed that most of the Indian companies are still emphasizing on quality. However, automobile sector has set to compete globally with high innovation rate, faster new product development, and continuous improvement. It is also observed that Indian companies are investing more in AMS as compared to IIS and AMT. Manufacturing competence index is also computed for each sector

Multiphase field modelling of alloy solidification

We present an approach to alloy solidification modelling that incorporates binary interface energies in a manner that correctly reproduces the associated theoretical angles at triple junctions in eutectic solidification. We find that simply applying the principle that the correct binary junction behaviour is recovered when only two phases are present is insufficient. Previous research (Toth \cite{Toth2016}) recommends a modification of the surface energy by adding an energy barrier at the triple junction, and we explore alternative models that would benefit from this approach. The main approach we recommend here, though, is to extend the minimal model of Folch and Plapp \cite{folch2003,FolchPlapp2005}, which, without modification, is limited to $120^\circ$ junction angles. This is achieved by a linear transformation of this formulation, and facilitated by an analytical multiphase solution presented here for the first time

Long-Time Tails and Anomalous Slowing Down in the Relaxation of Spatially Inhomogeneous Excitations in Quantum Spin Chains

Exact analytic calculations in spin-1/2 XY chains, show the presence of long-time tails in the asymptotic dynamics of spatially inhomogeneous excitations. The decay of inhomogeneities, for $t\to \infty$, is given in the form of a power law $$(t/\tau_{Q}) ^{-\nu_{Q}}$$ where the relaxation time $\tau_{Q}$ and the exponent $\nu_{Q}$ depend on the wave vector $Q$, characterizing the spatial modulation of the initial excitation. We consider several variants of the XY model (dimerized, with staggered magnetic field, with bond alternation, and with isotropic and uniform interactions), that are grouped into two families, whether the energy spectrum has a gap or not. Once the initial condition is given, the non-equilibrium problem for the magnetization is solved in closed form, without any other assumption. The long-time behavior for $t\to \infty$ can be obtained systematically in a form of an asymptotic series through the stationary phase method. We found that gapped models show critical behavior with respect to $Q$, in the sense that there exist critical values $Q_{c}$, where the relaxation time $\tau_{Q}$ diverges and the exponent $\nu_{Q}$ changes discontinuously. At those points, a slowing down of the relaxation process is induced, similarly to phenomena occurring near phase transitions. Long-lived excitations are identified as incommensurate spin density waves that emerge in systems undergoing the Peierls transition. In contrast, gapless models do not present the above anomalies as a function of the wave vector $Q$.Comment: 25 pages, 2 postscript figures. Manuscript submitted to Physical Review

Modeling of Ti-W Solidification Microstructures Under Additive Manufacturing Conditions

Additive manufacturing (AM) processes have many benefits for the fabrication of alloy parts, including the potential for greater microstructural control and targeted properties than traditional metallurgy processes. To accelerate utilization of this process to produce such parts, an effective computational modeling approach to identify the relationships between material and process parameters, microstructure, and part properties is essential. Development of such a model requires accounting for the many factors in play during this process, including laser absorption, material addition and melting, fluid flow, various modes of heat transport, and solidification. In this paper, we start with a more modest goal, to create a multiscale model for a specific AM process, Laser Engineered Net Shaping (LENS™), which couples a continuum-level description of a simplified beam melting problem (coupling heat absorption, heat transport, and fluid flow) with a Lattice Boltzmann-cellular automata (LB-CA) microscale model of combined fluid flow, solute transport, and solidification. We apply this model to a binary Ti-5.5 wt pct W alloy and compare calculated quantities, such as dendrite arm spacing, with experimental results reported in a companion paper

Search for gravitational-wave transients associated with magnetar bursts in advanced LIGO and advanced Virgo data from the third observing run

Gravitational waves are expected to be produced from neutron star oscillations associated with magnetar giant f lares and short bursts. We present the results of a search for short-duration (milliseconds to seconds) and longduration (∼100 s) transient gravitational waves from 13 magnetar short bursts observed during Advanced LIGO, Advanced Virgo, and KAGRA’s third observation run. These 13 bursts come from two magnetars, SGR1935 +2154 and SwiftJ1818.0−1607. We also include three other electromagnetic burst events detected by FermiGBM which were identified as likely coming from one or more magnetars, but they have no association with a known magnetar. No magnetar giant flares were detected during the analysis period. We find no evidence of gravitational waves associated with any of these 16 bursts. We place upper limits on the rms of the integrated incident gravitational-wave strain that reach 3.6 × 10−²³ Hz at 100 Hz for the short-duration search and 1.1 ×10−²² Hz at 450 Hz for the long-duration search. For a ringdown signal at 1590 Hz targeted by the short-duration search the limit is set to 2.3 × 10−²² Hz. Using the estimated distance to each magnetar, we derive upper limits upper limits on the emitted gravitational-wave energy of 1.5 × 1044 erg (1.0 × 1044 erg) for SGR 1935+2154 and 9.4 × 10^43 erg (1.3 × 1044 erg) for Swift J1818.0−1607, for the short-duration (long-duration) search. Assuming isotropic emission of electromagnetic radiation of the burst fluences, we constrain the ratio of gravitational-wave energy to electromagnetic energy for bursts from SGR 1935+2154 with the available fluence information. The lowest of these ratios is 4.5 × 103

A joint Fermi-GBM and Swift-BAT analysis of gravitational-wave candidates from the third gravitational-wave observing run

We present Fermi Gamma-ray Burst Monitor (Fermi-GBM) and Swift Burst Alert Telescope (Swift-BAT) searches for gamma-ray/X-ray counterparts to gravitational-wave (GW) candidate events identified during the third observing run of the Advanced LIGO and Advanced Virgo detectors. Using Fermi-GBM onboard triggers and subthreshold gamma-ray burst (GRB) candidates found in the Fermi-GBM ground analyses, the Targeted Search and the Untargeted Search, we investigate whether there are any coincident GRBs associated with the GWs. We also search the Swift-BAT rate data around the GW times to determine whether a GRB counterpart is present. No counterparts are found. Using both the Fermi-GBM Targeted Search and the Swift-BAT search, we calculate flux upper limits and present joint upper limits on the gamma-ray luminosity of each GW. Given these limits, we constrain theoretical models for the emission of gamma rays from binary black hole mergers

Constraints on the cosmic expansion history from GWTC–3

We use 47 gravitational wave sources from the Third LIGO–Virgo–Kamioka Gravitational Wave Detector Gravitational Wave Transient Catalog (GWTC–3) to estimate the Hubble parameter H(z), including its current value, the Hubble constant H0. Each gravitational wave (GW) signal provides the luminosity distance to the source, and we estimate the corresponding redshift using two methods: the redshifted masses and a galaxy catalog. Using the binary black hole (BBH) redshifted masses, we simultaneously infer the source mass distribution and H(z). The source mass distribution displays a peak around 34 M⊙, followed by a drop-off. Assuming this mass scale does not evolve with the redshift results in a H(z) measurement, yielding ${H}_{0}={68}_{-8}^{+12}\,\mathrm{km}\ \,\ {{\rm{s}}}^{-1}\,{\mathrm{Mpc}}^{-1}$ (68% credible interval) when combined with the H0 measurement from GW170817 and its electromagnetic counterpart. This represents an improvement of 17% with respect to the H0 estimate from GWTC–1. The second method associates each GW event with its probable host galaxy in the catalog GLADE+, statistically marginalizing over the redshifts of each event's potential hosts. Assuming a fixed BBH population, we estimate a value of ${H}_{0}={68}_{-6}^{+8}\,\mathrm{km}\ \,\ {{\rm{s}}}^{-1}\,{\mathrm{Mpc}}^{-1}$ with the galaxy catalog method, an improvement of 42% with respect to our GWTC–1 result and 20% with respect to recent H0 studies using GWTC–2 events. However, we show that this result is strongly impacted by assumptions about the BBH source mass distribution; the only event which is not strongly impacted by such assumptions (and is thus informative about H0) is the well-localized event GW190814

Open data from the third observing run of LIGO, Virgo, KAGRA, and GEO

The global network of gravitational-wave observatories now includes five detectors, namely LIGO Hanford, LIGO Livingston, Virgo, KAGRA, and GEO 600. These detectors collected data during their third observing run, O3, composed of three phases: O3a starting in 2019 April and lasting six months, O3b starting in 2019 November and lasting five months, and O3GK starting in 2020 April and lasting two weeks. In this paper we describe these data and various other science products that can be freely accessed through the Gravitational Wave Open Science Center at https://gwosc.org. The main data set, consisting of the gravitational-wave strain time series that contains the astrophysical signals, is released together with supporting data useful for their analysis and documentation, tutorials, as well as analysis software packages

Search for eccentric black hole coalescences during the third observing run of LIGO and Virgo

Despite the growing number of binary black hole coalescences confidently observed through gravitational waves so far, the astrophysical origin of these binaries remains uncertain. Orbital eccentricity is one of the clearest tracers of binary formation channels. Identifying binary eccentricity, however, remains challenging due to the limited availability of gravitational waveforms that include the effects of eccentricity. Here, we present observational results for a waveform-independent search sensitive to eccentric black hole coalescences, covering the third observing run (O3) of the LIGO and Virgo detectors. We identified no new high-significance candidates beyond those that have already been identified with searches focusing on quasi-circular binaries. We determine the sensitivity of our search to high-mass (total source-frame mass M > 70 M⊙) binaries covering eccentricities up to 0.3 at 15 Hz emitted gravitational-wave frequency, and use this to compare model predictions to search results. Assuming all detections are indeed quasi-circular, for our fiducial population model, we place a conservative upper limit for the merger rate density of high-mass binaries with eccentricities 0 < e ≤ 0.3 at 16.9 Gpc−3 yr−1 at the 90% confidence level

ANALYSIS OF ECONOMICS OF QUALITY IN MANUFACTURING INDUSTRIES

In modern industries, much emphasis is given to quality as it is the most effective tool which can capture, retain and enlarge customer base. The customer satisfaction is the ultimate goal of business and no other strategy can achieve it other than attaining best quality. An improvement in quality enhances customer satisfaction, taper s manufacturing costs and of course in turn, increases productivity. But in business scenario, improving quality should be considered along with the expenses associated with it. The strategy should be to achieve high Quality in a most economic way. So identifying effective methods for the analysis of economics behind quality and reduction of costs associated with achieving quality is a serious potential management problem and should be looked in to and analyzed. Economics of Quality analysis which is also termed as cost of quality or quality cost analysis has emerged as a powerful management tool for assessing the present quality level of the organization and to identify the improvement opportunities and also supports in decision making. This paper presents a study on quality cost analysis of two manufacturing units and tries to analyze the interrelationships between quality cost categories using statistical methods. The secondary data collected from the financial records of two firms under manufacturing sector is used for this analysis. The Pearson product momentum correlation coefficient between different quality cost categories provides insight to the relationships between different quality cost elements and in turn helps management to set action priorities to be addressed to achieve good quality at lower cost. The regression analysis helps the management in estimation or prediction of the unknown value of one variable from the known value of the other variable