Efficient and versatile manipulation of the peripheral CD4+ T-cell compartment by antigen targeting to DNGR-1/CLEC9A

DC NK lectin group receptor-1 (DNGR-1, also known as CLEC9A) is a C-type lectin receptor expressed by mouse CD8α+ DC and by their putative equivalents in human. DNGR-1 senses necrosis and regulates CD8+ T-cell cross-priming to dead-cell-associated antigens. In addition, DNGR-1 is a target for selective in vivo delivery of antigens to DC and the induction of CD8+ T-cell and Ab responses. In this study, we evaluated whether DNGR-1 targeting can be additionally used to manipulate antigen-specific CD4+ T lymphocytes. Injection of small amounts of antigen-coupled anti-DNGR-1 mAb into mice promoted MHC class II antigen presentation selectively by CD8α+ DC. In the steady state, this was sufficient to induce proliferation of antigen-specific naïve CD4+ T cells and to drive their differentiation into Foxp3+ regulatory lymphocytes. Co-administration of adjuvants prevented this induction of tolerance and promoted immunity. Notably, distinct adjuvants allowed qualitative modulation of CD4+ T-cell behavior: poly I:C induced a strong IL-12-independent Th1 response, whereas curdlan led to the priming of Th17 cells. Thus, antigen targeting to DNGR-1 is a versatile approach for inducing functionally distinct CD4+ T-cell responses. Given the restricted pattern of expression of DNGR-1 across species, this strategy could prove useful for developing immunotherapy protocols in humans

Direct methanol fuel cells: Developments for portable power and for potential transportation applications

The authors describe here results of recent efforts at Los Alamos National Laboratory (LANL), devoted to potential application of Direct Methanol Fuel Cells (DMFCs) as (1) portable power sources at the 50 W level, and (2) primary power sources for electric vehicles. In general, DMFC R and D efforts focus on further improvements in anode catalytic activity, fuel utilization (as related to methanol crossover) and air cathode performance in the presence of the presence of the significant flux of aqueous methanol from anode to cathode. There are significant differences between technical parameters and targets for the two different DMFC applications, which the authors have addressed. They include the lower cell temperature (about 60 C) preferred in portable power vs. operation around 100 C as target temperature for transportation applications, and the much stronger concern for cost of catalyst and any other stack materials in DMFCs developed for potential transportation applications. Most, if not all, recent DMFC work for either portable power or potential transportation applications has strongly focused on cells with polymeric (primarily PFSA) membrane electrolytes. In work at LANL, thin film catalysts bonded to the membrane, e.g., by the decal method, provided best results in terms of catalyst utilization and overall cell performance. In most tests, the single DMFC hardware consisted of uncatalyzed carbon-cloth gas-diffusion backings and graphite blocks with machined serpentine flow channels--quite similar to hardware employed in work with hydrogen/air PEFCs. However, the machined graphite hardware has recently been replaced by alternative, non-machined flow-field/bipolar plates, which enables effective air and aqueous methanol solution distribution along an active area of 50 cm{sup 2}, at a pitch per cell of 2 mm

Optimization of carbon-supported platinum cathode catalysts for DMFC operation.

In this paper, we describe performance and optimization of carbon-supported cathode catalysts at low platinum loading. We find that at a loading below 0.6 mg cm-2 carbon-supported platinum outperforms platinum black as a DMFC cathode catalyst. A catalyst with a 1:1 volume ratio of the dry NafionTM to the electronically conducting phase (platinum plus carbon support) provides the best performance in oxygen reduction reaction. Thanks to improved catalyst utilization, carbon-supported catalysts with a platinum content varying from 40 wt% to 80 wt% deliver very good DMFC performance, even at relatively modest precious metal loadings investigated in this work

Essential versus accessory aspects of cell death: recommendations of the NCCD 2015

Cells exposed to extreme physicochemical or mechanical stimuli die in an uncontrollable manner, as a result of their immediate structural breakdown. Such an unavoidable variant of cellular demise is generally referred to as ‘accidental cell death’ (ACD). In most settings, however, cell death is initiated by a genetically encoded apparatus, correlating with the fact that its course can be altered by pharmacologic or genetic interventions. ‘Regulated cell death’ (RCD) can occur as part of physiologic programs or can be activated once adaptive responses to perturbations of the extracellular or intracellular microenvironment fail. The biochemical phenomena that accompany RCD may be harnessed to classify it into a few subtypes, which often (but not always) exhibit stereotyped morphologic features. Nonetheless, efficiently inhibiting the processes that are commonly thought to cause RCD, such as the activation of executioner caspases in the course of apoptosis, does not exert true cytoprotective effects in the mammalian system, but simply alters the kinetics of cellular demise as it shifts its morphologic and biochemical correlates. Conversely, bona fide cytoprotection can be achieved by inhibiting the transduction of lethal signals in the early phases of the process, when adaptive responses are still operational. Thus, the mechanisms that truly execute RCD may be less understood, less inhibitable and perhaps more homogeneous than previously thought. Here, the Nomenclature Committee on Cell Death formulates a set of recommendations to help scientists and researchers to discriminate between essential and accessory aspects of cell death

Chitosan-coated mesoporous MIL-100(Fe) nanoparticles as improved bio-compatible oral nanocarriers

Nanometric biocompatible Metal-Organic Frameworks (nanoMOFs) are promising candidates for drug delivery. Up to now, most studies have targeted the intravenous route, related to pain and severe complications; whereas nanoMOFs for oral administration, a commonly used non-invasive and simpler route, remains however unexplored. We propose here the biofriendly preparation of a suitable oral nanocarrier based on the benchmarked biocompatible mesoporous iron(III) trimesate nanoparticles coated with the bioadhesive polysaccharide chitosan (CS). This method does not hamper the textural/ structural properties and the sorption/release abilities of the nanoMOFs upon surface engineering. The interaction between the CS and the nanoparticles has been characterized through a combination of high resolution soft X-ray absorption and computing simulation, while the positive impact of the coating on the colloidal and chemical stability under oral simulated conditions is here demonstrated. Finally, the intestinal barrier bypass capability and biocompatibility of CS-coated nanoMOF have been assessed in vitro, leading to an increased intestinal permeability with respect to the noncoated material, maintaining an optimal biocompatibility. In conclusion, the preservation of the interesting physicochemical features of the CS-coated nanoMOF and their adapted colloidal stability and progressive biodegradation, together with their improved intestinal barrier bypass, make these nanoparticles a promising oral nanocarrier

Regulatory T Cells in γ Irradiation-Induced Immune Suppression

Sublethal total body γ irradiation (TBI) of mammals causes generalized immunosuppression, in part by induction of lymphocyte apoptosis. Here, we provide evidence that a part of this immune suppression may be attributable to dysfunction of immune regulation. We investigated the effects of sublethal TBI on T cell memory responses to gain insight into the potential for loss of vaccine immunity following such exposure. We show that in mice primed to an MHC class I alloantigen, the accelerated graft rejection T memory response is specifically lost several weeks following TBI, whereas identically treated naïve mice at the same time point had completely recovered normal rejection kinetics. Depletion in vivo with anti-CD4 or anti-CD25 showed that the mechanism involved cells consistent with a regulatory T cell (T reg) phenotype. The loss of the T memory response following TBI was associated with a relative increase of CD4+CD25+ Foxp3+ expressing T regs, as compared to the CD8+ T effector cells requisite for skin graft rejection. The radiation-induced T memory suppression was shown to be antigen-specific in that a third party ipsilateral graft rejected with normal kinetics. Remarkably, following the eventual rejection of the first MHC class I disparate skin graft, the suppressive environment was maintained, with markedly prolonged survival of a second identical allograft. These findings have potential importance as regards the immunologic status of T memory responses in victims of ionizing radiation exposure and apoptosis-inducing therapies

The cytoskeleton in cell-autonomous immunity: structural determinants of host defence

Host cells use antimicrobial proteins, pathogen-restrictive compartmentalization and cell death in their defence against intracellular pathogens. Recent work has revealed that four components of the cytoskeleton — actin, microtubules, intermediate filaments and septins, which are well known for their roles in cell division, shape and movement — have important functions in innate immunity and cellular self-defence. Investigations using cellular and animal models have shown that these cytoskeletal proteins are crucial for sensing bacteria and for mobilizing effector mechanisms to eliminate them. In this Review, we highlight the emerging roles of the cytoskeleton as a structural determinant of cell-autonomous host defence

The effector T cell response to influenza infection

Influenza virus infection induces a potent initial innate immune response, which serves to limit the extent of viral replication and virus spread. However, efficient (and eventual) viral clearance within the respiratory tract requires the subsequent activation, rapid proliferation, recruitment, and expression of effector activities by the adaptive immune system, consisting of antibody producing B cells and influenza-specific T lymphocytes with diverse functions. The ensuing effector activities of these T lymphocytes ultimately determine (along with antibodies) the capacity of the host to eliminate the viruses and the extent of tissue damage. In this review, we describe this effector T cell response to influenza virus infection. Based on information largely obtained in experimental settings (i.e., murine models), we will illustrate the factors regulating the induction of adaptive immune T cell responses to influenza, the effector activities displayed by these activated T cells, the mechanisms underlying the expression of these effector mechanisms, and the control of the activation/differentiation of these T cells, in situ, in the infected lungs