117 research outputs found
Structural health monitoring for wind turbine foundations
The construction of onshore wind turbines has rapidly been increasing as the UK attempts to meet its renewable energy targets. As the UK’s future energy depends more on wind farms, safety and security are critical to the success of this renewable energy source. Structural integrity of the tower and its components is a critical element of this security of supply. With the stochastic nature of the load regime a bespoke low cost structural health monitoring system is required to monitor integrity of the concrete foundation supporting the tower. This paper presents an assessment of ‘embedded can’ style foundation failure modes in large onshore wind turbines and proposes a novel condition based monitoring solution to aid in early warning of failure. The most common failure modes are discussed and a low-cost remote monitoring system is presented
Investigation of Damper Valve Dynamics Using Parametric Numerical Methods
The objectives of this study are to identify the dynamics of a Tenneco Automotive hydraulic damper valve and to predict valve performance. Accurate simulations of damper valve performance can be used to improve valve designs without the expense of physical testing. The Tenneco damper valve consists of thin shims and a spring preloaded disc that restricts fluid from exiting the main flow orifices. The deflection of the shims and spring are dependent on the flow-rate through the valve. The pressure distribution acting on the deformable valve components is investigated numerically using a dynamic modelling technique. This technique involves sequential geometry and simulation updating, while varying both the geometry and flow-rate. The valve deflection is calculated by post-processing the pressure distribution. Valve performance can be predicted by coupling the valve deflection with CFD pressure results
Fatigue analysis of wind turbine gearbox bearings using SCADA data and miner's rule
This paper presents studies of wind turbine load estimation, based upon SCADA data, to derive bearing load histograms for the high speed shaft (HSS) of a typical, three-stage, wind turbine gearbox. Rain-flow counting has been applied to determine the number of loading occurrences at different load values. Damage ratios for bearings have been predicted using this data by the application of Miner's rule. Results show that the bearings have an overload Cycle Ratio of less than 20% above rated and overloads of Load Ratio of 1.0~1.1 incurring significant damage to the bearings
Componential coding in the condition monitoring of electrical machines Part 2: application to a conventional machine and a novel machine
This paper (Part 2) presents the practical application of componential coding, the principles of which were described in the accompanying Part 1 paper. Four major issues are addressed, including optimization of the neural network, assessment of the anomaly detection results, development of diagnostic approaches (based on the reconstruction error) and also benchmarking of componential coding with other techniques (including waveform measures, Fourier-based signal reconstruction and principal component analysis). This is achieved by applying componential coding to the data monitored from both a conventional induction motor and from a novel transverse flux motor. The results reveal that machine condition monitoring using componential coding is not only capable of detecting and then diagnosing anomalies but it also outperforms other conventional techniques in that it is able to separate very small and localized anomalies
Long-term research challenges in wind energy – a research agenda by the European Academy of Wind Energy
The European Academy of Wind Energy (eawe), representing universities and institutes with a significant wind energy programme in 14 countries, has discussed the long-term research challenges in wind energy. In contrast to research agendas addressing short- to medium-term research activities, this eawe document takes a longer-term perspective, addressing the scientific knowledge base that is required to develop wind energy beyond the applications of today and tomorrow. In other words, this long-term research agenda is driven by problems and curiosity, addressing basic research and fundamental knowledge in 11 research areas, ranging from physics and design to environmental and societal aspects. Because of the very nature of this initiative, this document does not intend to be permanent or complete. It shows the vision of the experts of the eawe, but other views may be possible. We sincerely hope that it will spur an even more intensive discussion worldwide within the wind energy community
Investigation of the Unbalanced Magnetic Pull Damping Effect in Squirrel Cage Induction Machines
Review of magnetic gear technologies and their applications in marine energy
The marine energy industry is in its early stages but has a large potential for growth. One of the most significant challenges is the reduction of operation and maintenance costs. Magnetic gears (MGs) offer the potential for long periods between maintenance intervals due to their frictionless torque transmission which could reduce these costs. This study presents a summary of the state of the art in MG technology and then investigates its potential for marine energy applications. A brief overview is given of the state of the marine energy industry and the environment in which marine energy converters (MECs) operate. A short history of MG development over the past century is then presented followed by a discussion of the leading MG technologies and their relative advantages. In order to demonstrate the potential of MGs in marine applications, the current technologies, i.e. mechanically geared and direct drive machines, are examined in terms of sizing, reliability and economic value using previous studies on a similar technology, namely wind. MGs are applied to four types of MECs to demonstrate how the technology can be incorporated. The potential to deploy at scale and potential obstacles to this are then discussed
Quantitative Proteomics Identifies the Myb-Binding Protein p160 as a Novel Target of the von Hippel-Lindau Tumor Suppressor
Background: The von Hippel-Lindau (VHL) tumor suppressor gene encodes a component of a ubiquitin ligase complex, which is best understood as a negative regulator of hypoxia inducible factor (HIF). VHL ubiquitinates and degrades the a subunits of HIF, and this is proposed to suppress tumorigenesis and tumor angiogenesis. However, several lines of evidence suggest that there are unidentified substrates or targets for VHL that play important roles in tumor suppression. Methodology/Principal Findings: Employing quantitative proteomics, we developed an approach to systematically identify the substrates of ubiquitin ligases and using this method, we identified the Myb-binding protein p160 as a novel substrate of VHL. Conclusions/Significance: A major barrier to understanding the functions of ubiquitin ligases has been the difficulty in pinpointing their ubiquitination substrates. The quantitative proteomics approach we devised for the identification of VHL substrates will be widely applicable to other ubiquitin ligases
Multivariable Analysis for Advanced Analytics of Wind Turbine Management
Operation and maintenance tasks on the wind turbines have an essen- tial role to ensure the correct condition of the system and to minimize losses and increase the productivity. The condition monitoring systems installed on the main components of the wind turbines provide information about the tasks that should be carried out over the time. A novel statistical methodology for multivariable analysis of big data from wind turbines is presented in this paper. The objective is to analyse the necessary information from the condition monitoring systems installed in wind farms. The novel approach filters the main parameters from the collected signals and uses advanced computational techniques for evaluating the data and giving mean- ing to them. The main advantage of the approach is the possibility of the big data analysis based on the main information available
Myb-binding protein 1a augments AhR-dependent gene expression
We have studied the mechanism by which an acidic domain (amino acids 515-583) of the aromatic hydrocarbon receptor (AhR) transactivates a target gene. Studies with glutathione S-transferase fusion proteins demonstrate that the wild-type acidic domain associates in vitro with Myb-binding protein la, whereas a mutant domain (F542A, 1569A) does not. AhR-defective cells reconstituted with an AhR containing the wild-type acidic domain exhibit normal AhR function; however, cells reconstituted with an AhR containing the mutant acidic domain do not function normally. Transient transfection of Myb-binding protein la into mouse hepatoma cells is associated with augmentation of AhR-dependent gene expression. Such augmentation does not occur when Myb-binding protein la is transfected into AhR-defective cells that have been reconstituted with an AhR that lacks the acidic domain. We infer that 1) Myb-binding protein la associates with AhR, thereby enhancing transactivation, and 2) the presence of AhR's acidic domain is both necessary and sufficient for Myb-binding protein la to increase AhR-dependent gene expression
- …