Fenton-like degradation of Bisphenol A catalyzed by mesoporous Cu/TUD-1

A family of copper oxide catalysts with loadings spanning 1–5 wt% were dispersed on a three dimensional, mesoporous TUD-1 silica through a hydrothermal, surfactant-free route employing tetraethylene glycol as a structure-directing agent. Their bulk and surface properties were characterized by N2 physisorption, XRD, DRUVS, EPR, TEM and Raman spectroscopy, confirming the expected mesoporous wormhole/foam support morphology and presence of well-dispersed CuO nanoparticles (∼5–20 nm). The catalytic performance of Cu/TUD-1 was evaluated as heterogeneous Fenton-like catalysts for Bisphenol A (BPA) oxidative degradation in the presence of H2O2 as a function of [H2O2], and CuO loading. Up to 90.4% of 100 ppm BPA removal was achieved over 2.5 wt% Cu/TUD-1 within 180 min, with negligible Cu leaching into the treated water

Effect of Fe Doping on Photocatalytic Dye-Degradation and Antibacterial Activity of SnO2 Nanoparticles

A simple hydrothermal method is utilized to synthesize iron-doped tin oxide nanoparticles (Fe-SnO2 NPs) at various doping concentrations. The structural characterization using XRD, Raman, and FTIR measurements confirmed the incorporation of Fe ions into the SnO2 lattice without any deviation in the tetragonal crystal system of SnO2 nanoparticles. SEM and HRTEM images show the spherical-shaped nanoparticles with agglomeration. The values of interplanar spacing ( d -value) calculated from the HRTEM lattice are consistent with the XRD results. Further, optical analysis revealed a red shift in the optical absorption band and a decrease in the band gap energy with an increase in Fe-dopant concentration. The decrease of PL emission peak intensity with Fe doping revealed the generation of singly charged oxygen vacancies. The H2O2-assisted photocatalytic degradation efficiency of Fe-SnO2 NPs investigated against crystal violet dye indicated an efficiency of 98% for 0.05 M Fe-SnO2 NPs within 30 minutes under visible light illumination. In addition, the effects of pH, scavengers, and reusability of the catalyst are tested. The antibacterial behavior of Fe-SnO2 NPs against Escherichia coli is examined by using the colony count method, and the inhibition rate was found to be 49, 65, 70, and 78% for pure, 0.01, 0.03, and 0.05 M Fe-SnO2 NPs, respectively

Expansion of HIV Laboratory Diagnostic Services in Chennai, India 2001–2006: Is the Growth Commensurate with the Need?

Objective: To describe the changes in HIV services provided and the patient population utilizing voluntary counseling and testing (VCT) services at private testing laboratories in Chennai, India in 2001 and 2006. Methods: In 2001, a cross-sectional descriptive survey was conducted to assess the services provided and client population of 1,031 private laboratories. A subset of labs (9%) that had been surveyed in 2001 were also studied in 2006. Results: In 2001, significantly more high volume labs (.10 HIV tests per month) offered HIV diagnostic tests than low volume labs (,10 HIV test per month) (p,0.001). More high volume labs (20.0%) provided pre-test counseling as part of HIV testing than low volume labs (11.1%) (p = 0.003). Between 2001 and 2006, the number of labs that provided HIV diagnostic tests significantly increased, including ELISA (87.8 % vs. 40.0%), Western Blot (84.4 % vs. 13.3%), and Tridot (98.9 % vs. 72.2%) (p,0.001). Also the number of labs that reported greater than 10 women seeking HIV testing per month significantly increased from 14.5 % to 79.0 % (p = 0.006). More labs provided pre-test counseling in 2006 (34.4%) than in 2001 (21.1%) (p = 0.046). Conclusions: Though HIV diagnostic testing services have increasingly become available, counseling services have not expanded commensurately. Further outreach and education is necessary to expand comprehensive HIV VCT services in bot

Synergy in Efficacy of Fungal Entomopathogens and Permethrin against West African Insecticide-Resistant Anopheles gambiae Mosquitoes

Background Increasing incidences of insecticide resistance in malaria vectors are threatening the sustainable use of contemporary chemical vector control measures. Fungal entomopathogens provide a possible additional tool for the control of insecticide-resistant malaria mosquitoes. This study investigated the compatibility of the pyrethroid insecticide permethrin and two mosquito-pathogenic fungi, Beauveria bassiana and Metarhizium anisopliae, against a laboratory colony and field population of West African insecticide-resistant Anopheles gambiae s.s. mosquitoes. Methodology/Findings A range of fungus-insecticide combinations was used to test effects of timing and sequence of exposure. Both the laboratory-reared and field-collected mosquitoes were highly resistant to permethrin but susceptible to B. bassiana and M. anisopliae infection, inducing 100% mortality within nine days. Combinations of insecticide and fungus showed synergistic effects on mosquito survival. Fungal infection increased permethrin-induced mortality rates in wild An. gambiae s.s. mosquitoes and reciprocally, exposure to permethrin increased subsequent fungal-induced mortality rates in both colonies. Simultaneous co-exposure induced the highest mortality; up to 70.3±2% for a combined Beauveria and permethrin exposure within a time range of one gonotrophic cycle (4 days). Conclusions/Significance Combining fungi and permethrin induced a higher impact on mosquito survival than the use of these control agents alone. The observed synergism in efficacy shows the potential for integrated fungus-insecticide control measures to dramatically reduce malaria transmission and enable control at more moderate levels of coverage even in areas where insecticide resistance has rendered pyrethroids essentially ineffective

Exposure to Sublethal Doses of Fipronil and Thiacloprid Highly Increases Mortality of Honeybees Previously Infected by Nosema ceranae

International audienceBACKGROUND: The honeybee, Apis mellifera, is undergoing a worldwide decline whose origin is still in debate. Studies performed for twenty years suggest that this decline may involve both infectious diseases and exposure to pesticides. Joint action of pathogens and chemicals are known to threaten several organisms but the combined effects of these stressors were poorly investigated in honeybees. Our study was designed to explore the effect of Nosema ceranae infection on honeybee sensitivity to sublethal doses of the insecticides fipronil and thiacloprid. METHODOLOGY/FINDING: Five days after their emergence, honeybees were divided in 6 experimental groups: (i) uninfected controls, (ii) infected with N. ceranae, (iii) uninfected and exposed to fipronil, (iv) uninfected and exposed to thiacloprid, (v) infected with N. ceranae and exposed 10 days post-infection (p.i.) to fipronil, and (vi) infected with N. ceranae and exposed 10 days p.i. to thiacloprid. Honeybee mortality and insecticide consumption were analyzed daily and the intestinal spore content was evaluated 20 days after infection. A significant increase in honeybee mortality was observed when N. ceranae-infected honeybees were exposed to sublethal doses of insecticides. Surprisingly, exposures to fipronil and thiacloprid had opposite effects on microsporidian spore production. Analysis of the honeybee detoxification system 10 days p.i. showed that N. ceranae infection induced an increase in glutathione-S-transferase activity in midgut and fat body but not in 7-ethoxycoumarin-O-deethylase activity. CONCLUSIONS/SIGNIFICANCE: After exposure to sublethal doses of fipronil or thiacloprid a higher mortality was observed in N. ceranae-infected honeybees than in uninfected ones. The synergistic effect of N. ceranae and insecticide on honeybee mortality, however, did not appear strongly linked to a decrease of the insect detoxification system. These data support the hypothesis that the combination of the increasing prevalence of N. ceranae with high pesticide content in beehives may contribute to colony depopulation

Acylation of isobutylbenzene with acetic anhydride on AlKIT-6 mesoporous acid catalyst

Aluminium substituted mesoporous KIT-6 materials were directly synthesized by hydrothermal method with different silica to aluminium ratios (Si/Al = 25, 50, 75, 100). These materials were obtained by using Pluronic P123 and n-butanol as a structure-directing agent and co-solvent respectively, under high acidic conditions. The prepared catalysts were characterized by small-angle XRD, ICP-AES, nitrogen sorption analysis, TGA, SEM, TEM, and XPS techniques. The characterization revealed that aluminium is mainly incorporated into the framework of KIT-6. The XRD patterns and TEM images of materials showed a highly ordered cubic Ia3d mesostructure. The incorporation of the aluminium was clearly evident from XPS and ICP-AES techniques. Further, the synthesized Al-KIT-6 catalysts were tested in the acylation of isobutylbenzene (IBB) with acetic anhydride (AA). The results revealed that Al-KIT-6 (25) was a prominent active catalyst due to silica to aluminium ratio than others. The catalytic reaction conditions were tuned to obtain a high selectivity of 4-isobutyl acetophenone (4-IBA) with high conversion of isobutylbenzene. Al-KIT-6 (25) showed a high conversion (72%) of isobutylbenzene and 94% selectivity of 4-isobutyl acetophenone

Experimental Investigation of Performance and Emission Characteristics of Coated Squish Piston in a CI Engine Fueled With Vegetable Oil

515-520In this study, the performance and emission characteristics of the CI engine using coated squish piston fueled with Jatropha oil is investigated experimentally. The obtained results were compared with the conventional piston. The test was conducted in single cylinder naturally aspirated water cooled direct injection diesel engine. The squish head and Partially Stabilized Zirconia coating was provided in the conventional piston bowl which helps in better turbulence, i.e., better mixing of air and fuel mixture resulting in improved combustion with the reduced emissions. Because of improved combustion, the peak cycle temperature in the combustion chamber increases. This increase in peak cycle temperature helps in better atomization and vaporization of the fuel used, i.e., Jatropha biodiesel. The increase in the combustion chamber temperature reduces the viscosity of the Jatropha biodiesel resulting in improved combustion. The performance and emission characteristics were improved much better with the squish piston when compared with the conventional piston. Improved brake thermal efficiency was obtained with the coated squish piston. Emissions like HC, CO and Smoke was considerably reduced with the coated squish piston. But in turn, NOX and CO2 are increased due to the increase in peak cycle temperature inside the combustion chamber