A new player in cartilage homeostasis: adiponectin induces nitric oxide synthase type II and pro-inflammatory cytokines in chondrocytes

SummaryObjectiveRecent studies revealed a close connection between adipose tissue, adipokines and articular degenerative inflammatory diseases such as rheumatoid arthritis (RA) and osteoarthritis (OA). The goal of this work was to investigate the activity of adiponectin in human and murine chondrocytes and to study its functional role in the modulation of nitric oxide synthase type II (NOS2). For completeness, interleukin (IL)-6, IL-1β, matrix metalloproteinase (MMP)-2, MMP-3, MMP-9, tissue inhibitor of metalloproteinase (TIMP)-1, prostaglandin E2 (PGE2), leukotriene B4 (LTB4), tumor necrosis factor alpha (TNF)-α and monocyte chemoattractant protein-1 (MCP-1) accumulation have been evaluated in adiponectin-stimulated chondrocytes cell culture supernatants.MethodsMurine ATDC5 cell line, C28/I2, C20A4, TC28a2 human immortalized chondrocytes, and human cultured chondrocytes were used. Nitrite accumulation was determined by Griess reaction. Adiponectin receptors (AdipoRs) expression was evaluated by immunofluorescence microscopy and confirmed by reverse transcriptase-polymerase chain reaction. NOS2 expression was evaluated by Western blot analysis whereas cytokines, prostanoids and metalloproteinases production was evaluated by specific enzyme-linked immunosorbent assays.ResultsHuman and murine chondrocytes express functional AdipoRs. Adiponectin induces NOS2. This effect is inhibited by aminoguanidine, dexamethasone and by a selective inhibitor of phosphatidylinositol 3-kinase. In addition, adiponectin is able to increase IL-6, MMP-3, MMP-9 and MCP-1 by murine cultured chondrocytes whereas it was unable to modulate TNF-α, IL-1β, MMP-2, TIMP-1, PGE2 and LTB4 release.ConclusionsThese results bind more closely the interactions between fat-derived adipokines and articular inflammatory diseases, and suggest that adiponectin is a novel key element in the maintenance of cartilage homeostasis which might be considered as a potential therapeutical target in joint degenerative diseases

Calculation methods of Radon-222 radiological activity for NORM plant with ventilation

A procedure is proposed to determine the radiological activity of air present in the working area of a NORM (Naturally-Occurring Radioactive Materials) plant. This NORM plant is located in the United Arab Emirates and is dedicated to the recycling of material and equipment used in oil extraction facilities. Substantial quantities of NORM waste will be present inside the enclosed plant facilities and will exhale significant amounts of Radon-222 into the working environment. The continued inhalation of this gas and its progeny has been shown to cause lung cancer. In order to reduce the concentration level of the aforementioned gas to an acceptable regulatory value, the best solution is by means of mechanical ventilation. The two calculation methods used to analysis the relationship between the ventilation rate and the degree of radioactive contamination are considered. The first being ventilation by perfect dilution, commonly employed in industrial environments with radiological contamination. The second method of analysis is by means of a CFD (Computational Fluid Dynamics) which permits a more precise calculation of the required fresh air quantity and spatial concentrations. Validation was carried out in a small experimental plant space, obtaining results reasonable approximate to those predicted by the computational analysis. The similarities and differences between the respective calculation methods and their respective fields of application are analyzed. It is concluded that for lower air change rates, less than five air changes per hour, the CFD analysis is the most appropriate method. By contrast, when using a higher rate of outside air changes in the plant, the perfect dilution method should be sufficient enough to control the presence of radon and its progeny. Both calculation methods consider the activity of radon and the activity of the most significant radioisotopes of its progeny

Effect of implantoplasty on the elastic limit of dental implants of different diameters

Background Implantoplasty reduces both implant diameter and the thickness of its walls, subsequently reducing the ability of the implant to resist fracture in response to functional load. In combination with an increase in the crown-implant ratio due to bone loss, this could increase the lever effect, which in presence of high masticatory forces or parafunctional habits, could lead to complications such as fracture of the implant or loosening of the prosthetic screw. Objectives To determine the elastic limits of internal connection, dental implants of different designs and diameters after an implantoplasty. Materials and methods This in vitro study included 315 tapered internal connection titanium dental implants, the threads of which were removed with an industrial milling machine-for standardized implantoplasty (IMP1; n = 105)-or with the conventional approach-manually, using high-speed burs (IMP2; n = 105). The remaining 105 implants were used as controls. The final implant diameters were recorded. The quality of the newly polished surfaces was assessed by scanning electron microscopy. All implants were subjected to a mechanical pressure resistance test. A Tukey''s test for multiple comparisons was used to detect differences in the elastic limit and final implant diameters between the implant groups. Results There were statistically significant differences in the elastic limit between the IMP1, IMP2, and control groups (p < 0.05). Furthermore, the implant diameter was significantly smaller in the IMP1 and IMP2 groups (p < 0.05). Scanning electron microscopy revealed smooth implant surfaces in the IMP1 and IMP2 groups, with some titanium particles visible in the IMP1 group. Conclusions Implantoplasty significantly decreased the elastic limit of internal connection titanium dental implants, especially in those with a smaller diameter (3-3.5 mm)

Aceptabilidad del diagnóstico rápido para HIV entre hombres gay y otros hombres que tienen sexo con hombres (G&HSH) de la Ciudad de Buenos Aires

El uso del diagnóstico rápido para HIV en Argentina, así como otros países de Latinoamérica, ha sido limitado hasta el momento. Este trabajo reporta los resultados provenientes de un estudio cualitativo realizado entre hombres gays y otros hombres que tienen sexo con hombres (G&HSH) de la Ciudad de Buenos Aires, Argentina. El objetivo principal del mismo fue conocer las ventajas y desventajas que los hombres G&HSH perciben en relación al diagnóstico rápido casero para HIV. Se realizaron ocho grupos focales con 73 participantes en los cuales se discutió acerca de las ventajas y desventajas del uso de los diagnósticos rápidos. Las respuestas fueron codificadas utilizando un programa para análisis de datos cualitativos (NVivo) y analizadas temáticamente. Los participantes describieron numerosas ventajas sobre el uso del diagnóstico rápido casero, aunque algunos reportaron importantes preocupaciones dentro de las cuales se destaca la posibilidad de impulsos suicidas si alguien recibe un resultado positivo estando solo. En términos generales se observó una gran aceptabilidad para el uso del diagnóstico rápido si el mismo es realizado por personal de salud en lugares acondicionados para este fin.Fil: Balan, Ivan C.. Columbia University; Estados UnidosFil: Carballo Dieguez, Alex. Columbia University; Estados UnidosFil: Marone, Rubén O.. Nexo Asociación Civil; ArgentinaFil: Pando, Maria de Los Angeles. Universidad de Buenos Aires. Facultad de Medicina. Departamento de Microbiología. Centro Nacional de Referencia del Sida; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Houssay; ArgentinaFil: Barreda, Victoria. Gobierno de la Ciudad de Buenos Aires. Ministerio de Salud; ArgentinaFil: Avila, Maria Mercedes. Universidad de Buenos Aires. Facultad de Medicina. Departamento de Microbiología. Centro Nacional de Referencia del Sida; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Houssay; Argentin

Air diffusion system design in large assembly halls. Case study of the Congress of Deputies parliament building, Madrid, Spain

The paper describes and analyses the air distribution solution adopted in the refurbishment of the Spanish Congress of Deputies assembly hall. A new approach is proposed for the design of displacement ventilation systems. The system performance is methodically validated both with laboratory tests, computational fluid dynamics analysis and experimental field measurements related to the environmental performance of the built environment. In assembly halls, microclimate and displacement ventilation systems, which supply air by means of floor mounted outlets, have been shown to perform adequately. In this case study floor air supply is not feasible. The solution adapted uses parapet mounted diffusers, using a confluent jet flow parallel to the floor plane above the occupied area. All the tools used to analyse the performance of this system showed that the admixing overhead supply, with ceiling return, and flowing parallel to and above the occupied zone is drawn back into the occupied zone, creating a plume effect similar to that of floor mounted displacement outlets. Thus, this confirms that the displacement effect can be accomplished using a high induction turbulent overhead supply with ceiling return. Therefore supplying air directly into the occupied zone, at or near to floor level, is not a prerequisite to achieve the desired displacement effect. This report concludes that, using the correct design parameters, as set out in this paper, the displacement ventilation effect is independent of the plane of air supply. The conclusions suggest that accepted criteria for the definition and design of displacement systems should be redefined

Computationally Guided Design of a Readily Assembled Phosphite- Thioether Ligand for a Broad Range of Pd-Catalyzed Asymmetric Allylic Substitutions

A modular approach employing indene as common starting material, has enabled the straightforward preparation in three reaction steps of P-thioether ligands for the Pd-catalyzed asymmetric allylic substitution. The analysis of a starting library of P-thioether ligands based on rational design and theoretical calculations has led to the discovery of an optimized anthracenethiol derivative with excellent behavior in the reaction of choice. Improving most approaches reported to date, this ligand presents a broad substrate and nucleophile scope. Excellent enantioselectivities have been achieved for a range of linear and cyclic allylic substrates using a large number of C-, N-, and O-nucleophiles (40 compounds in total). The species responsible for the catalytic activity have been further investigated by NMR in order to clearly establish the origin of the enantioselectivity. The resulting products have been derivatized by means of ring-closing metathesis or Pauson–Khand reactions to further prove the synthetic versatility of the methodology for preparing enantiopure complex structures

Multiferroic phase transition near room temperature in BiFeO3 films

In multiferroic BiFeO3 thin films grown on highly mismatched LaAlO3 substrates, we reveal the coexistence of two differently distorted polymorphs that leads to striking features in the temperature dependence of the structural and multiferroic properties. Notably, the highly distorted phase quasi-concomitantly presents an abrupt structural change, transforms from a hard to a soft ferroelectric and transitions from antiferromagnetic to paramagnetic at 360+/-20 K. These coupled ferroic transitions just above room temperature hold promises of giant piezoelectric, magnetoelectric and piezomagnetic responses, with potential in many applications fields

Design of a precision compactor for use in guided bone regeneration in the area of oral surgery

During the processes of guided bone regeneration in the maxillary bones, which aim to recover or preserve support tissue for the placement of implants on which dental prostheses are retained, the use of various particulate graft biomaterials from different sources (animal or synthetic) is standardized. At present, the pressure of compaction of this material in the recipient bone is manual, dependent on the clinician, although there is some scientific evidence on the effects of different compressive forces on angiogenesis and prognosis of the regeneration of the grafted areas. The aim of the present study is to design, calibrate and verify in vitro a compaction instrument for clinical use, which allows a controlled and precise compaction pressure of the particulate graft biomaterial and standardize the procedure. The designed instrument is a precision compactor of adequate size for proper intra and extraoral clinical manageability and manufactured in a sterilizable material by autoclaving. The range of compression that allows (0 -1, 82 Newton), is within the forces that are commonly applied in surgery and that have been determined by a specific test on 8 oral surgeons. Instrument calibration has been performed by an independent accredited company. The testing of the instrument was carried out by an in vitro test where the biomaterial was compacted at different forces (0, 80 and 1, 82 Newton) and was observed by a computerized micro-tomography that when increasing the compression force, decreased the space between particles provided for the migration and proliferation of new blood vessels and cells. Durante los procedimientos de regeneración ósea guiada en los huesos maxilares, que tienen como objetivo recuperar o preservar tejido de soporte para la colocación de implantes sobre los que se retienen las prótesis dentales, está estandarizado el uso de diversos biomateriales de injerto particulado de diferente procedencia (animal o sintético). En la actualidad la presión de compactación de dicho material en el hueso receptor es manual, clínico dependiente, pese a que existe cierta evidencia científica sobre los efectos de las diferentes fuerzas de compresión en la angiogénesis y pronóstico de la regeneración de las zonas injertadas. El objetivo del presente estudio es el de diseñar, calibrar y comprobar in vitro un instrumento de compactación para uso clínico, que permita una presión de compactación controlada y precisa del biomaterial de injerto particulado y estandarizar el procedimiento. El instrumento diseñado es un compactador de precisión de tamaño adecuado para una correcta manejabilidad clínica intra y extraoral y fabricado en un material esterilizable por autoclavado. El rango de compresión que permite (0 – 1, 82 Newton), está dentro de las fuerzas que se aplican comúnmente en cirugía y que se han determinado mediante una prueba específica sobre 8 cirujanos orales. La calibración del instrumento se ha realizado por una empresa acreditada independiente. La comprobación del instrumento se ha realizado mediante un ensayo in vitro donde se compactó el biomaterial a diferentes fuerzas (0, 80 y 1, 82 Newton) y se observó mediante micro-tomografía computerizada que al aumentar la fuerza de compresión disminuía el espacio entre partículas provisto para la migración y proliferación de los nuevos vasos sanguíneos y células

Mono-crystalline silicon wafers manufactured by casting methods: Optoelectronic, structural and solar cell study

1) Introduction 2) The Quasi-mono, pseudo-mono, mono-like ERA. 3) Manufacturing mono-cast ingots: COST (seed recycling) 4) Summary and findings 5) Current status at DCWafer

Finding needles in haystacks: linking scientific names, reference specimens and molecular data for Fungi

DNA phylogenetic comparisons have shown that morphology-based species recognition often underestimates fungal diversity. Therefore, the need for accurate DNA sequence data, tied to both correct taxonomic names and clearly annotated specimen data, has never been greater. Furthermore, the growing number of molecular ecology and microbiome projects using high-throughput sequencing require fast and effective methods for en masse species assignments. In this article, we focus on selecting and re-annotating a set of marker reference sequences that represent each currently accepted order of Fungi. The particular focus is on sequences from the internal transcribed spacer region in the nuclear ribosomal cistron, derived from type specimens and/or ex-type cultures. Re-annotated and verified sequences were deposited in a curated public database at the National Center for Biotechnology Information (NCBI), namely the RefSeq Targeted Loci (RTL) database, and will be visible during routine sequence similarity searches with NR_prefixed accession numbers. A set of standards and protocols is proposed to improve the data quality of new sequences, and we suggest how type and other reference sequences can be used to improve identification of Fungi