Complementary Nucleobase Interactions Drive the Hierarchical Self-Assembly of Core-Shell Bottlebrush Block Copolymers toward Cylindrical Supramolecules

The self-assembly of amphiphilic block copolymers has facilitated the preparation of a wide variety of nano-objects of diverse morphology. Ready access to these nanostructures has opened up new possibilities in catalysis, sensing, and nanomedicine. In comparison, the self-assembly of large building blocks (i.e., amphiphilic bottlebrush polymers) has received less attention, owing in part to the relatively more challenging synthesis of these macromolecules. Bottlebrush amphiphiles can self-assemble into uniquely stable spherical nanostructures and can also produce dynamic cylinders with lengths modulated by environmental conditions, motivating further research in this area. Herein, we report the synthesis of core–shell bottlebrush polymers (BBPs) containing complementary nucleobase functionalities via a combination of ring-opening metathesis polymerization (ROMP) and reversible addition–fragmentation chain transfer (RAFT) polymerization, using a “grafting-from” approach, and their hierarchical self-assembly in aqueous media. Mixtures of BBPs containing thymine or adenine units in their core blocks were found to self-assemble into higher-order cylindrical supramolecules upon heating above a critical temperature. This temperature was demonstrated to correspond to the lower critical solution temperature (LCST) of the corona-forming poly(4-acryloylmorpholine) block, providing evidence for a unique one-dimensional BBP assembly mechanism. Moreover, the formation of extended supramolecular assemblies was preferentially observed when both thymine- and adenine-functionalized BBPs were present in equimolar concentrations, pointing toward an alternating, isodesmic mechanism of organization occurring via nucleobase interactions located at their chain termini. We anticipate that these discoveries will provide the basis for future studies regarding BBP self-assembly, especially with regard to the formation of stimuli-responsive anisotropic nanostructures

Polymerization-Induced Polymersome Fusion

The dynamic interactions of membranes, particularly their fusion and fission, are critical for the transmission of chemical information between cells. Fusion is primarily driven by membrane tension built up through membrane deformation. For artificial polymersomes, fusion is commonly induced via the external application of a force field. Herein, fusion-promoted development of anisotropic tubular polymersomes (tubesomes) was achieved in the absence of an external force by exploiting the unique features of aqueous ring-opening metathesis polymerization-induced self-assembly (ROMPISA). The out-of-equilibrium tubesome morphology was found to arise spontaneously during polymerization, and the composition of each tubesome sample (purity and length distribution) could be manipulated simply by targeting different core-block degrees of polymerization (DPs). The evolution of tubesomes was shown to occur via fusion of “monomeric” spherical polymersomes, evidenced most notably by a step-growth-like relationship between the fraction of tubular to spherical nano-objects and the average number of fused particles per tubesome (analogous to monomer conversion and DP, respectively). Fusion was also confirmed by Förster resonance energy transfer (FRET) studies to show membrane blending and confocal microscopy imaging to show mixing of the polymersome lumens. We term this unique phenomenon polymerization-induced polymersome fusion, which operates via the buildup of membrane tension exerted by the growing polymer chains. Given the growing body of evidence demonstrating the importance of nanoparticle shape on biological activity, our methodology provides a facile route to reproducibly obtain samples containing mixtures of spherical and tubular polymersomes, or pure samples of tubesomes, of programmed length. Moreover, the capability to mix the interior aqueous compartments of polymersomes during polymerization-induced fusion also presents opportunities for its application in catalysis, small molecule trafficking, and drug delivery

In vivo cranial bone strain and bite force in the agamid lizard Uromastyx geyri

In vivo bone strain data are the most direct evidence of deformation and strain regimes in the vertebrate cranium during feeding and can provide important insights into skull morphology. Strain data have been collected during feeding across a wide range of mammals; in contrast, in vivo cranial bone strain data have been collected from few sauropsid taxa. Here we present bone strain data recorded from the jugal of the herbivorous agamid lizard Uromastyx geyri along with simultaneously recorded bite force. Principal and shear strain magnitudes in Uromastyx geyri were lower than cranial bone strains recorded in Alligator mississippiensis, but higher than those reported from herbivorous mammals. Our results suggest that variations in principal strain orientations in the facial skeleton are largely due to differences in feeding behavior and bite location, whereas food type has little impact on strain orientations. Furthermore, mean principal strain orientations differ between male and female Uromastyx during feeding, potentially because of sexual dimorphism in skull morphology

The South Asian genome

Genetics of disease Microarrays Variant genotypes Population genetics Sequence alignment AllelesThe genetic sequence variation of people from the Indian subcontinent who comprise one-quarter of the world's population, is not well described. We carried out whole genome sequencing of 168 South Asians, along with whole-exome sequencing of 147 South Asians to provide deeper characterisation of coding regions. We identify 12,962,155 autosomal sequence variants, including 2,946,861 new SNPs and 312,738 novel indels. This catalogue of SNPs and indels amongst South Asians provides the first comprehensive map of genetic variation in this major human population, and reveals evidence for selective pressures on genes involved in skin biology, metabolism, infection and immunity. Our results will accelerate the search for the genetic variants underlying susceptibility to disorders such as type-2 diabetes and cardiovascular disease which are highly prevalent amongst South Asians.Whole genome sequencing to discover genetic variants underlying type-2 diabetes, coronary heart disease and related phenotypes amongst Indian Asians. Imperial College Healthcare NHS Trust cBRC 2011-13 (JS Kooner [PI], JC Chambers)

Assessment of Multivessel Coronary Artery Disease Using Cardiovascular Magnetic Resonance Pixelwise Quantitative Perfusion Mapping

OBJECTIVES: The authors sought to compare the diagnostic accuracy of quantitative perfusion maps to visual assessment (VA) of first-pass perfusion images for the detection of multivessel coronary artery disease (MVCAD). BACKGROUND: VA of first-pass stress perfusion cardiac magnetic resonance (CMR) may underestimate ischemia in MVCAD. Pixelwise perfusion mapping allows quantitative measurement of regional myocardial blood flow, which may improve ischemia detection in MVCAD. METHODS: One hundred fifty-one subjects recruited at 2 centers underwent stress perfusion CMR with myocardial perfusion mapping, and invasive coronary angiography with coronary physiology assessment. Ischemic burden was assessed by VA of first-pass images and by quantitative measurement of stress myocardial blood flow using perfusion maps. RESULTS: In patients with MVCAD (2-vessel [2VD] or 3-vessel disease [3VD]; n = 95), perfusion mapping identified significantly more segments with perfusion defects (median segments per patient 12 [interquartile range (IQR): 9 to 16] by mapping vs. 8 [IQR: 5 to 9.5] by VA; p < 0.001). Ischemic burden (IB) measured using mapping was higher in MVCAD compared with IB measured using VA (3VD mapping 100 % (75% to 100%) vs. first-pass 56% (38% to 81%) ; 2VD mapping 63% (50% to 75%) vs. first-pass 41% (31% to 50%); both p < 0.001), but there was no difference in single-vessel disease (mapping 25% (13% to 44%) vs. 25% (13% to 31%). Perfusion mapping was superior to VA for the correct identification of extent of coronary disease (78% vs. 58%; p < 0.001) due to better identification of 3VD (87% vs. 40%) and 2VD (71% vs. 48%). CONCLUSIONS: VA of first-pass stress perfusion underestimates ischemic burden in MVCAD. Pixelwise quantitative perfusion mapping increases the accuracy of CMR in correctly identifying extent of coronary disease. This has important implications for assessment of ischemia and therapeutic decision-making

Effective bridging therapy can improve CD19 CAR-T outcomes while maintaining safety in patients with large B-cell lymphoma

The impact of bridging therapy (BT) on CD19-directed chimeric antigen receptor T-cell (CD19CAR-T) outcomes in large B-cell lymphoma (LBCL) is poorly characterised. Current practice is guided by physician preference rather than established evidence. Identification of effective BT modalities and factors predictive of response could improve CAR-T intention to treat and clinical outcomes. We assessed BT modality and response in 375 adult LBCL patients in relation to outcomes following axicabtagene ciloleucel (Axi-cel) or tisagenlecleucel (Tisa-cel). The majority of patients received BT with chemotherapy (57%) or radiotherapy (17%). We observed that BT was safe for patients, with minimal morbidity/mortality. We showed that complete or partial response to BT conferred a 42% reduction in disease progression and death following CD19CAR-T therapy. Multivariate analysis identified several factors associated with likelihood of response to BT, including response to last line therapy, the absence of bulky disease, and the use of Polatuzumab-containing chemotherapy regimens. Our data suggested that complete/partial response to BT may be more important for Tisa-cel than Axi-cel, as all Tisa-cel patients with less than partial response to BT experienced frank relapse within 12 months of CD19CAR-T infusion. In summary, BT in LBCL should be carefully planned towards optimal response and disease debulking, to improve CD19CAR-T patient outcomes. Polatuzumab-containing regimens should be strongly considered for all suitable patients, and failure to achieve complete/partial response to BT pre-Tisa-cel may prompt consideration of further lines of BT where possible

Search for CP violation in D0 and D+ decays

A high statistics sample of photoproduced charm particles from the FOCUS (E831) experiment at Fermilab has been used to search for CP violation in the Cabibbo suppressed decay modes D+ to K-K+pi+, D0 to K-K+ and D0 to pi-pi+. We have measured the following CP asymmetry parameters: A_CP(K-K+pi+) = +0.006 +/- 0.011 +/- 0.005, A_CP(K-K+) = -0.001 +/- 0.022 +/- 0.015 and A_CP(pi-pi+) = +0.048 +/- 0.039 +/- 0.025 where the first error is statistical and the second error is systematic. These asymmetries are consistent with zero with smaller errors than previous measurements.Comment: 12 pages, 4 figure

A Study of D0 --> K0(S) K0(S) X Decay Channels

Using data from the FOCUS experiment (FNAL-E831), we report on the decay of $D^0$ mesons into final states containing more than one $K^0_S$. We present evidence for two Cabibbo favored decay modes, $D^0\to K^0_SK^0_S K^- \pi^+$ and $D^0\to K^0_SK^0_S K^+ \pi^-$, and measure their combined branching fraction relative to $D^0\to \bar{K} ^0\pi^+\pi^-$ to be $\frac{\Gamma(D^0\to K^0_SK^0_SK^{\pm}\pi^{\mp})}{\Gamma(D^0\to \bar{K} ^0\pi^+\pi^-)}$ = 0.0106 $\pm$ 0.0019 $\pm$ 0.0010. Further, we report new measurements of $\frac{\Gamma(D^0\to K^0_SK^0_SK^0_S)}{\Gamma(D^0\to \bar{K} ^0\pi^+\pi^-)}$ = 0.0179 $\pm$ 0.0027 $\pm$ 0.0026, $\frac{\Gamma(D^0\to K^0\bar{K} ^0)}{\Gamma(D^0\to \bar{K} ^0\pi^+\pi^-)}$ = 0.0144 $\pm$ 0.0032 $\pm$ 0.0016, and $\frac{\Gamma(D^0\to K^0_SK^0_S\pi^+\pi^-)}{\Gamma(D^0\to \bar{K} ^0\pi^+\pi^-)}$ = 0.0208 $\pm$ 0.0035 $\pm$ 0.0021 where the first error is statistical and the second is systematic.Comment: 11 pages, 3 figures, typos correcte

Differential response effects of data collection mode in a cancer screening study of unmarried women ages 40–75 years: A randomized trial

<p>Abstract</p> <p>Background</p> <p>Little is known about the impact of data collection method on self-reported cancer screening behaviours, particularly among hard-to-reach populations. The purpose of this study is to examine the effects of data collection mode on response to indicators of cancer screenings by unmarried middle-aged and older women.</p> <p>Methods</p> <p>Three survey methods were evaluated for collecting data about mammography and Papanicolaou (hereafter, Pap) testing among heterosexual and sexual minority (e.g., lesbian and bisexual) women. Women ages 40–75 were recruited from June 2003 – June 2005 in Rhode Island. They were randomly assigned to receive: Self-Administered Mailed Questionnaire [SAMQ; N = 202], Computer-Assisted Telephone Interview [CATI; N = 200], or Computer-Assisted Self-Interview [CASI; N = 197]. Logistic regression models were computed to assess survey mode differences for 13 self-reported items related to cancer screenings, adjusting for age, education, income, race, marital status, partner gender, and recruitment source.</p> <p>Results</p> <p>Compared to women assigned to CATI, women assigned to SAMQ were less likely to report two or more years between most recent mammograms (CATI = 23.2% vs. SAMQ = 17.7%; AOR = 0.5, 95% CI = 0.3 – 0.8) and women assigned to CASI were slightly less likely to report being overdue for mammography (CATI = 16.5% vs. CASI = 11.8%; AOR = 0.5, 95% CI = 0.3 – 1.0) and Pap testing (CATI = 14.9% vs. CASI = 10.0%; AOR = 0.5, 95% CI = 0.2 – 1.0). There were no other consistent mode effects.</p> <p>Conclusion</p> <p>Among participants in this sample, mode of data collection had little effect on the reporting of mammography and Pap testing behaviours. Other measures such as efficiency and cost-effectiveness of the mode should also be considered when determining the most appropriate form of data collection for use in monitoring indicators of cancer detection and control.</p