Calculated and experimental Schmid factors for chip flow deformation of textured CVD α-alumina coatings

A thorough analysis of Schmid factors (m) for three different (basal and two prismatic) slip systems and three different coating textures, (0001), (011\uaf2) and (112\uaf0), was done in order to understand the influence of CVD α-alumina coating textures on the ability of the coatings to deform plastically at different locations on the rake face of a cutting tool insert during a metal machining operation. Schmid factor diagrams were constructed using MATLAB/MTEX in order to visualize the angular dependence of an external force relative to the α-Al O crystals (grains) on the Schmid factor. The diagrams were also used to extract m-value frequency distributions for different slip systems and textures. In addition, lateral m-value distribution maps were obtained from experimental textured coatings using electron backscatter diffraction. These maps show the ability for neighboring grains to deform plastically in the coatings. Cutting tool inserts with differently textured α-Al2O3 coatings were subjected to dry machining of a quench-tempered steel. Using scanning electron microscopy, the microstructure and surface topography of the worn alumina layers were investigated and it was found that a flatter surface morphology and higher probability of discrete plastic deformation are connected to less wear. This was observed in the (0001)-textured sample, which also exhibited the highest m-values in the wear zone with highest temperatures and external forces. It was observed that basal slip is most easily activated, followed by prismatic slip systems 1 and 2 in this case. For (011\uaf2) and (112\uaf0) textured coatings the differences in m-values for the three slip systems are not that big, and the distributions are relatively wide. It is clear that the Schmid factor analysis forms a basis that is important for understanding crater wear, especially when it is connected to local plastic deformation, of textured CVD α-Al2O3 coatings. The methodology of this work can be expanded to other coating systems and also more generally to applications where it is of interest to analyze the deformation behavior and local plastic anisotropy of textured materials

Electron scale structures and magnetic reconnection signatures in the turbulent magnetosheath

Collisionless space plasma turbulence can generate reconnecting thin current sheets as suggested by recent results of numerical magnetohydrodynamic simulations. The MMS mission provides the first serious opportunity to check if small ion-electron-scale reconnection, generated by turbulence, resembles the reconnection events frequently observed in the magnetotail or at the magnetopause. Here we investigate field and particle observations obtained by the MMS fleet in the turbulent terrestrial magnetosheath behind quasi-parallel bow shock geometry. We observe multiple small-scale current sheets during the event and present a detailed look of one of the detected structures. The emergence of thin current sheets can lead to electron scale structures where ions are demagnetized. Within the selected structure we see signatures of ion demagnetization, electron jets, electron heating and agyrotropy suggesting that MMS spacecraft observe reconnection at these scales

Electron Heating by Debye-Scale Turbulence in Guide-Field Reconnection

We report electrostatic Debye-scale turbulence developing within the diffusion region of asymmetric magnetopause reconnection with amoderate guide field using observations by the Magnetospheric Multiscale mission. We show that Buneman waves and beam modes cause efficient and fast thermalization of the reconnection electron jet by irreversible phase mixing, during which the jet kinetic energy is transferred into thermal energy. Our results show that the reconnection diffusion region in the presence of a moderate guide field is highly turbulent, and that electrostatic turbulence plays an important role in electron heating.Peer reviewe

An environmentally benign antimicrobial nanoparticle based on a silver-infused lignin core

Silver nanoparticles have antibacterial properties, but their use has been a cause for concern because they persist in the environment. Here, we show that lignin nanoparticles infused with silver ions and coated with a cationic polyelectrolyte layer form a biodegradable and green alternative to silver nanoparticles. The polyelectrolyte layer promotes the adhesion of the particles to bacterial cell membranes and, together with silver ions, can kill a broad spectrum of bacteria, including Escherichia coli, Pseudomonas aeruginosa and quaternary-amine-resistant Ralstonia sp. Ion depletion studies have shown that the bioactivity of these nanoparticles is time-limited because of the desorption of silver ions. High-throughput bioactivity screening did not reveal increased toxicity of the particles when compared to an equivalent mass of metallic silver nanoparticles or silver nitrate solution. Our results demonstrate that the application of green chemistry principles may allow the synthesis of nanoparticles with biodegradable cores that have higher antimicrobial activity and smaller environmental impact than metallic silver nanoparticles

The Viborg vascular (VIVA) screening trial of 65-74 year old men in the central region of Denmark: study protocol

<p>Abstract</p> <p>Background</p> <p>Screening for abdominal aortic aneurysm (AAA) of men aged 65-74 years reduces the AAA-related mortality and is generally considered cost effective. Despite of this only a few national health care services have implemented permanent programs.</p> <p>Around 10% of men in this group have peripheral arterial disease (PAD) defined by an ankle brachial systolic blood pressure index (ABI) below 0.9 resulting in an increased mortality-rate of 25-30%. In addition well-documented health benefits may be achieved through primary prophylaxis by initiating systematic cholesterol-lowering, smoking cessation, low-dose acetylsalicylic acid (aspirins), exercise, a healthy diet and blood-pressure control altogether reducing the increased risks for cardiovascular disease by at least 20-25%.</p> <p>The benefits of combining screening for AAA and PAD seem evident; yet they remain to be established. The objective of this study is to assess the efficacy and the cost-effectiveness of a combined screening program for AAA, PAD and hypertension.</p> <p>Methods</p> <p>The Viborg Vascular (VIVA) screening trial is a randomized, clinically controlled study designed to evaluate the benefits of vascular screening and modern vascular prophylaxis in a population of 50,000 men aged 65-74 years. Enrolment started October 2008 and is expected to stop in October 2010. The primary outcome is all-cause mortality. The secondary outcomes are cardiovascular mortality, AAA-related mortality, hospital services related to cardiovascular conditions, prevalence of AAA, PAD and potentially undiagnosed hypertension, health-related quality of life and cost effectiveness. Data analysis by intention to treat.</p> <p>Results</p> <p>Major follow-up will be performed at 3, 5 and 10 years and final study result after 15 years.</p> <p>Trial registration</p> <p>ClinicalTrials.gov NCT00662480</p

Celecoxib does not appear to affect prosthesis fixation in total knee replacement: A randomized study using radiostereometry in 50 patients

Background and purpose After joint replacement, a repair process starts at the interface between bone and cement. If this process is disturbed, the prosthesis may never become rigidly fixed to the bone, leading to migration—and with time, loosening. Cox-2 inhibitors are widely used as postoperative analgesics, and have adverse effects on bone healing. This could tamper prosthesis fixation. We investigated whether celecoxib, a selective Cox-2 inhibitor, increases prosthesis migration in total knee replacement (TKR)

Prospective Randomized Controlled Trial to Analyze the Effects of Intermittent Pneumatic Compression on Edema Following Autologous Femoropopliteal Bypass Surgery

Background: Patients who undergo autologous femoropopliteal bypass surgery develop postoperative edema in the revascularized leg. The effects of intermittent pneumatic compression (IPC) to treat and to prevent postreconstructive edema were examined in this study. Methods: In a prospective randomized trial, patients were assigned to one of two groups. All patients suffered from peripheral arterial disease, and all were subjected to autologous femoropopliteal bypass reconstruction. Patients in group 1 used a compression stocking (CS) above the knee exerting 18 mmHg (class I) on the leg postoperatively for 1 week (day and night). Patients in group 2 used IPC on the foot postoperatively at night for 1 week. The lower leg circumference was measured preoperatively and at five postoperative time points. A multivariate analysis was done using a mixed model analysis of variance. Results: A total of 57 patients were analyzed (CS 28; IPC 29). Indications for operation were severe claudication (CS 13; IPC 13), rest pain (10/5), or tissue loss (7/11). Revascularization was performed with either a supragenicular (CS 13; IPC10) or an infragenicular (CS 15; IPC 19) autologous bypass. Leg circumference increased on day 1 (CS/IPC): 0.4%/2.7%, day 4 (2.1%/6.1%), day 7 (2.5%/7.9%), day 14 (4.7%/7.3%), and day 90 (1.0%/3.3%) from baseline (preoperative situation). On days 1, 4, and 7 there was a significant difference in leg circumference between the two treatment groups. Conclusions: Edema following femoropopliteal bypass surgery occurs in all patients. For the prevention and treatment of that edema the use of a class I CS proved superior to treatment with IPC. The use of CS remains the recommended practice following femoropopliteal bypass surgery

Turbulence Heating ObserveR – satellite mission proposal

The Universe is permeated by hot, turbulent, magnetized plasmas. Turbulent plasma is a major constituent of active galactic nuclei, supernova remnants, the intergalactic and interstellar medium, the solar corona, the solar wind and the Earth’s magnetosphere, just to mention a few examples. Energy dissipation of turbulent fluctuations plays a key role in plasma heating and energization, yet we still do not understand the underlying physical mechanisms involved. THOR is a mission designed to answer the questions of how turbulent plasma is heated and particles accelerated, how the dissipated energy is partitioned and how dissipation operates in different regimes of turbulence. THOR is a single-spacecraft mission with an orbit tuned to maximize data return from regions in near-Earth space – magnetosheath, shock, foreshock and pristine solar wind – featuring different kinds of turbulence. Here we summarize the THOR proposal submitted on 15 January 2015 to the ‘Call for a Medium-size mission opportunity in ESAs Science Programme for a launch in 2025 (M4)’. THOR has been selected by European Space Agency (ESA) for the study phase