112 research outputs found
Formal Quantum Efficiencies for the Photocatalytic Reduction of CO2 in a Gas Phase Batch Reactor
The photocatalytic reduction of CO2 to fuels, or useful products, is an area of active research. In this work, nanoengineering and surface modification of titania were investigated as approaches for improving the CO2 reduction efficiency in a fixed-bed gas phase batch photoreactor under UVâvis irradiation. Titania nanotubes were prepared by a hydrothermal method, and TiO2 (P25) was surface modified with copper clusters. Unmodified TiO2 (P25) was used as the bench-mark comparison. The titania nanotubes and Cu-TiO2 materials showed higher efficiency for the photocatalytic reduction of CO2 to yield CH4 as compared to P25. Carbon monoxide yields were similar for all photocatalysts tested. The photocatalytic reduction of CO2 was observed on all photocatalyst tested, with the nanotubes proving to be the most efficient for the production of CH4. The product yields per mass of catalyst observed in this work are similar to those reported in the literature (with similar reactor parameters) but the calculated formal quantum efficiencies for CO2 reduction are very low (4.41âĂâ10â5 to 5.95âĂâ10-4)
Multifunctional photo/thermal catalysts for the reduction of carbon dioxide
The photochemical fixation of CO2 to energy rich products for solar energy storage or feedstock chemicals is an attractive, albeit daunting, challenge. The overall feasibility of CO2 conversion is limited by the availability of efficient photo-active materials that meet the energetic requirements for CO2 reduction and are optically matched to the solar spectrum. Surface modification of TiO2 with earth abundant metal oxides presents one approach to develop visible active photocatalysts through band gap narrowing, while providing catalytic sites to lower the activation energy for CO2 reduction. In this work density functional theory was used to model the effect of surface modification of rutile and anatase using MnOx nanoclusters. The results indicate the formation of inter-band gap states following surface modification with MnOx, but surface water can change this. Oxygen vacancies are predicted to form in supported MnOx and the interaction with CO2 was investigated. MnOx-TiO2 was synthesized and characterised using surface analytical methods and photoelectrochemistry. The interaction of CO2 with the materials under irradiation was probed using in-situ FTIR to interrogate the role of oxygen vacancies in CO2 binding and reaction. These results provide insights into the requirements of a multifunctional catalyst for CO2 conversion
Trematodes of the Great Barrier Reef, Australia: emerging patterns of diversity and richness in coral reef fishes
The Great Barrier Reef holds the richest array of marine life found anywhere in Australia, including a diverse and fascinating parasite fauna. Members of one group, the trematodes, occur as sexually mature adult worms in almost all Great Barrier Reef bony fish species. Although the first reports of these parasites were made 100 years ago, the fauna has been studied systematically for only the last 25 years. When the fauna was last reviewed in 1994 there were 94 species known from the Great Barrier Reef and it was predicted that there might be 2,270 in total. There are now 326 species reported for the region, suggesting that we are in a much improved position to make an accurate prediction of true trematode richness. Here we review the current state of knowledge of the fauna and the ways in which our understanding of this fascinating group is changing. Our best estimate of the true richness is now a range, 1,100â1,800 species. However there remains considerable scope for even these figures to be incorrect given that fewer than one-third of the fish species of the region have been examined for trematodes. Our goal is a comprehensive characterisation of this fauna, and we outline what work needs to be done to achieve this and discuss whether this goal is practically achievable or philosophically justifiable
Continental-scale variation in otolith geochemistry of juvenile American shad (Alosa sapidissima)
Author Posting. © NRC Research Press, 2008. This article is posted here by permission of NRC Research Press for personal use, not for redistribution. The definitive version was published in Canadian Journal of Fisheries and Aquatic Sciences 65 (2008): 2623-2635, doi:10.1139/F08-164.We assembled a comprehensive atlas of geochemical signatures in juvenile American shad (Alosa sapidissima) to discriminate natal river origins on a large spatial scale and at a high spatial resolution. Otoliths and (or) water samples were collected from 20 major spawning rivers from Florida to Quebec and were analyzed for elemental (Mg:Ca, Mn:Ca, Sr:Ca, and Ba:Ca) and isotope (87Sr:86Sr and Ύ18O) ratios. We examined correlations between water chemistry and otolith composition for five rivers where both were sampled. While Sr:Ca, Ba:Ca, 87Sr:86Sr, and Ύ18O values in otoliths reflected those ratios in ambient waters, Mg:Ca and Mn:Ca ratios in otoliths varied independently of water chemistry. Geochemical signatures were highly distinct among rivers, with an average classification accuracy of 93% using only those variables where otolith values were accurately predicted from water chemistry data. The study represents the largest assembled database of otolith signatures from the entire native range of a species, encompassing approximately 2700 km of coastline and 19 degrees of latitude and including all major extant spawning populations. This database will allow reliable estimates of natal origins of migrating ocean-phase American shad from the 2004 annual cohort in the future.This work was funded by National Science
Foundation (NSF) grants OCE-0215905 and OCE-0134998
to SRT and by an American Museum of Natural History
LernerâGray Grant for Marine Research and a scholarship
from SEASPACE, Inc., to BDW
Modified granular impact force laws for the OSIRIS-REx touchdown on the surface of asteroid (101955) Bennu
The OSIRIS-REx mission collected a sample from the surface of the asteroid (101955) Bennu in October 2020. Here we study the impact of the OSIRIS-REx Touch-and-Go Sampling Acquisition Mechanism (TAGSAM) interacting with the surface of an asteroid in the framework of granular physics. Traditional approaches to estimating the penetration depth of a projectile into a granular medium include force laws and scaling relationships formulated from laboratory experiments in terrestrial-gravity conditions. However, it is unclear that these formulations extend to the OSIRIS-REx scenario of a 1300-kg spacecraft interacting with regolith in a microgravity environment. We studied the TAGSAM interaction with Bennu through numerical simulations using two collisional codes, pkdgrav and GDC-i. We validated their accuracy by reproducing the results of laboratory impact experiments in terrestrial gravity. We then performed TAGSAM penetration simulations varying the following geotechnical properties of the regolith: packing fraction (P), bulk density, inter-particle cohesion (Ïc), and angle of friction (Ï). We find that the outcome of a spacecraft-regolith impact has a non-linear dependence on packing fraction. Closely packed regolith (Pâł0.6) can effectively resist the penetration of TAGSAM if Ïâł28° and/or Ïcâł50 Pa. For loosely packed regolith (PâČ0.5), the penetration depth is governed by a drag force that scales with impact velocity to the 4/3 power, consistent with energy conservation. We discuss the importance of low-speed impact studies for predicting and interpreting spacecraft-surface interactions. We show that these low-energy events also provide a framework for interpreting the burial depths of large boulders in asteroidal regolith
Fitting the integrated Spectral Energy Distributions of Galaxies
Fitting the spectral energy distributions (SEDs) of galaxies is an almost
universally used technique that has matured significantly in the last decade.
Model predictions and fitting procedures have improved significantly over this
time, attempting to keep up with the vastly increased volume and quality of
available data. We review here the field of SED fitting, describing the
modelling of ultraviolet to infrared galaxy SEDs, the creation of
multiwavelength data sets, and the methods used to fit model SEDs to observed
galaxy data sets. We touch upon the achievements and challenges in the major
ingredients of SED fitting, with a special emphasis on describing the interplay
between the quality of the available data, the quality of the available models,
and the best fitting technique to use in order to obtain a realistic
measurement as well as realistic uncertainties. We conclude that SED fitting
can be used effectively to derive a range of physical properties of galaxies,
such as redshift, stellar masses, star formation rates, dust masses, and
metallicities, with care taken not to over-interpret the available data. Yet
there still exist many issues such as estimating the age of the oldest stars in
a galaxy, finer details ofdust properties and dust-star geometry, and the
influences of poorly understood, luminous stellar types and phases. The
challenge for the coming years will be to improve both the models and the
observational data sets to resolve these uncertainties. The present review will
be made available on an interactive, moderated web page (sedfitting.org), where
the community can access and change the text. The intention is to expand the
text and keep it up to date over the coming years.Comment: 54 pages, 26 figures, Accepted for publication in Astrophysics &
Space Scienc
The High Energy Telescope for STEREO
The IMPACT investigation for the STEREO Mission includes a complement of Solar Energetic Particle instruments on each of the two STEREO spacecraft. Of these instruments, the High Energy Telescopes (HETs) provide the highest energy measurements. This paper describes the HETs in detail, including the scientific objectives, the sensors, the overall mechanical and electrical design, and the on-board software. The HETs are designed to measure the abundances and energy spectra of electrons, protons, He, and heavier nuclei up to Fe in interplanetary space. For protons and He that stop in the HET, the kinetic energy range corresponds to âŒ13 to 40 MeV/n. Protons that do not stop in the telescope (referred to as penetrating protons) are measured up to âŒ100 MeV/n, as are penetrating He. For stopping He, the individual isotopes 3He and 4He can be distinguished. Stopping electrons are measured in the energy range âŒ0.7â6 MeV
Physical activity attenuates the influence of FTO variants on obesity risk: A meta-analysis of 218,166 adults and 19,268 children
Background: The FTO gene harbors the strongest known susceptibility locus for obesity. While many individual studies have suggested that physical activity (PA) may attenuate the effect of FTO on obesity risk, other studies have not been able to confirm this interaction. To confirm or refute unambiguously whether PA attenuates the association of FTO with obesity risk, we meta-analyzed data from 45 studies of adults (n = 218,166) and nine studies of children and adolescents (n = 19,268). Methods and Findings: All studies identified to have data on the FTO rs9939609 variant (or any proxy [r2>0.8]) and PA were invited to participate, regardless of ethnicity or age of the participants. PA was standardized by categorizing it into a dichotomous variable (physically inactive versus active) in each study. Overall, 25% of adults and 13% of children were categorized as inactive. Interaction analyses were performed within each study by including the FTOĂPA interaction term in an additive model, adjusting for age and sex. Subsequently, random effects meta-analysis was used to pool the interaction terms. In adults, the minor (A-) allele of rs9939609 increased the odds of obesity by 1.23-fold/allele (95% CI 1.20-1.26), but PA attenuated this effect (pinteraction= 0.001). More specifically, the minor allele of rs9939609 increased the odds of obesity less in the physically active group (odds ratio = 1.22/allele, 95% CI 1.19-1.25) than in the inactive group (odds ratio = 1.30/allele, 95% CI 1.24-1.36). No such interaction was found in children and adolescents. Concl
- âŠ