Analysis On Runoff Characteristics Of Decentralized Rainwater Management System Using XP-SWMM Simulation

In recent years, impervious areas are increasing in residential zone as well as unsettled area with rapid urbanization and land use. Consequently, this phenomenon influences weak urban environmental compositions about climate change including urban flooding accidents. Therefore, a new paradigm on rainwater management is needed for sound and sustainable restoration of hydrological circulation. Recently, a novel rainwater management system has been developed and recommended for irrigation and flood control in Korea. Especially, P city is now planning a new rainwater management system adopting LID (Low Impact Development) techniques on a small scale development area. In this study, XP-SWMM was used to simulate effects on runoff characteristics by installation of 8 kinds of rainwater management facilities on small scale development area (4.2 ha) of P city in Korea. Also, flood control safety analysis under the condition of localized torrential downpour event was carried out and effects of rainwater recycling facility was evaluated to measure annual water resource amount and water cost reduction. Peak rate runoff was reduced 11.8% and 36.4% in restrict A and B, respectively. Total amount of annual water source substitution was estimated 3,000㎡/yr with LID adoption in land use planning. Acknowledgement : This research was supported by a grant (12-TI-C01) from Advanced Water Management Research Program funded by Ministry of Land , Infrastructure, and Transport of Korean government

ILC Reference Design Report Volume 1 - Executive Summary

The International Linear Collider (ILC) is a 200-500 GeV center-of-mass high-luminosity linear electron-positron collider, based on 1.3 GHz superconducting radio-frequency (SCRF) accelerating cavities. The ILC has a total footprint of about 31 km and is designed for a peak luminosity of 2x10^34 cm^-2s^-1. This report is the Executive Summary (Volume I) of the four volume Reference Design Report. It gives an overview of the physics at the ILC, the accelerator design and value estimate, the detector concepts, and the next steps towards project realization.The International Linear Collider (ILC) is a 200-500 GeV center-of-mass high-luminosity linear electron-positron collider, based on 1.3 GHz superconducting radio-frequency (SCRF) accelerating cavities. The ILC has a total footprint of about 31 km and is designed for a peak luminosity of 2x10^34 cm^-2s^-1. This report is the Executive Summary (Volume I) of the four volume Reference Design Report. It gives an overview of the physics at the ILC, the accelerator design and value estimate, the detector concepts, and the next steps towards project realization

ILC Reference Design Report Volume 4 - Detectors

This report, Volume IV of the International Linear Collider Reference Design Report, describes the detectors which will record and measure the charged and neutral particles produced in the ILC's high energy e+e- collisions. The physics of the ILC, and the environment of the machine-detector interface, pose new challenges for detector design. Several conceptual designs for the detector promise the needed performance, and ongoing detector R&D is addressing the outstanding technological issues. Two such detectors, operating in push-pull mode, perfectly instrument the ILC interaction region, and access the full potential of ILC physics.This report, Volume IV of the International Linear Collider Reference Design Report, describes the detectors which will record and measure the charged and neutral particles produced in the ILC's high energy e+e- collisions. The physics of the ILC, and the environment of the machine-detector interface, pose new challenges for detector design. Several conceptual designs for the detector promise the needed performance, and ongoing detector R&D is addressing the outstanding technological issues. Two such detectors, operating in push-pull mode, perfectly instrument the ILC interaction region, and access the full potential of ILC physics

ILC Reference Design Report Volume 3 - Accelerator

The International Linear Collider (ILC) is a 200-500 GeV center-of-mass high-luminosity linear electron-positron collider, based on 1.3 GHz superconducting radio-frequency (SCRF) accelerating cavities. The ILC has a total footprint of about 31 km and is designed for a peak luminosity of 2x10^34 cm^-2 s^-1. The complex includes a polarized electron source, an undulator-based positron source, two 6.7 km circumference damping rings, two-stage bunch compressors, two 11 km long main linacs and a 4.5 km long beam delivery system. This report is Volume III (Accelerator) of the four volume Reference Design Report, which describes the design and cost of the ILC.The International Linear Collider (ILC) is a 200-500 GeV center-of-mass high-luminosity linear electron-positron collider, based on 1.3 GHz superconducting radio-frequency (SCRF) accelerating cavities. The ILC has a total footprint of about 31 km and is designed for a peak luminosity of 2x10^34 cm^-2 s^-1. The complex includes a polarized electron source, an undulator-based positron source, two 6.7 km circumference damping rings, two-stage bunch compressors, two 11 km long main linacs and a 4.5 km long beam delivery system. This report is Volume III (Accelerator) of the four volume Reference Design Report, which describes the design and cost of the ILC