A stereoscopic ranging system using standard PC technology

A stereoscopic ranging system is currently being developed as a key source of positional information for an underwater ROV station keeping system. Advancements in PC technology make it possible to use a relatively simple image capture card and a PC as a platform for the fast capture and processing of video images. We make use of the extensive capabilities of fast data buses and the high processing power of fast PCs with Pentium II or III processors. Using this approach we are developing an image processing system that is largely manufacturer independent and promises a good path for both hardware and software upgrading in the future

Self-Other Mergence in the Frontal Cortex during Cooperation and Competition

This is the final version. Available on open access from Elsevier via the DOI in this recordTo survive, humans must estimate their own ability and the abilities of others. We found that, although people estimated their abilities on the basis of their own performance in a rational manner, their estimates of themselves were partly merged with the performance of others. Reciprocally, their ability estimates for others also reflected their own, as well as the others’, performance. Self-other mergence operated in a context-dependent manner: interacting with high or low performers, respectively, enhanced and diminished own ability estimates in cooperative contexts, but the opposite occurred in competitive contexts. Self-other mergence not only influenced subjective evaluations, it also affected how people subsequently objectively adjusted their performance. Perigenual anterior cingulate cortex tracked one’s own performance. Dorsomedial frontal area 9 tracked others’ performances, but also integrated contextual and self-related information. Self-other mergence increased with the strength of self and other representations in area 9, suggesting it carries interdependent representations of self and other.Wellcome Trus

Improving Breast Cancer Treatment Specificity Using Aptamers Obtained by 3D Cell-SELEX

Three-dimensional spheroids of non-malignant MCF10A and malignant SKBR3 breast cells were used for subsequent 3D Cell-SELEX to generate aptamers for specific binding and treatment of breast cancer cells. Using 3D Cell-SELEX combined with Next-Generation Sequencing and bioinformatics, ten abundant aptamer families with specific structures were identified that selectively bind to SKBR3, and not to MCF10A cells. Multivalent aptamer polymers were synthesized by co-polymerization and analyzed for binding performance as well as therapeutic efficacy. Binding performance was determined by confocal fluorescence imaging and revealed specific binding and efficient internalization of aptamer polymers into SKBR3 spheroids. For therapeutic purposes, DNA sequences that intercalate the cytotoxic drug doxorubicin were co-polymerized into the aptamer polymers. Viability tests show that the drug-loaded polymers are specific and effective in killing SKBR3 breast cancer cells. Thus, the 3D-selected aptamers enhanced the specificity of doxorubicin against malignant over non-malignant breast cells. The innovative modular DNA aptamer platform based on 3D Cell SELEX and polymer multivalency holds great promise for diagnostics and treatment of breast cancer

Low-temperature structural model of hcp solid C70_{70}

We report intermolecular potential-energy calculations for solid C_${70}$ and determine the optimum static orientations of the molecules at low temperature; we find them to be consistent with the monoclinic structural model proposed by us in an earlier report [Solid State Commun. {\bf 105), 247 (1998)]. This model indicates that the C_5 axis of the molecule is tilted by an angle $\approx$18^o from the monoclinic b axis in contrast with the molecular orientation proposed by Verheijen {\it et al.} [J. Chem. Phys. {\bf 166}, 287 (1992)] where the C_5 axis is parallel to the monoclinic b axis. In this calculation we have incorporated the effective bond charge Coulomb potential together with the Lennard-Jones potential between the molecule at the origin of the monoclinic unit cell and its six nearest neighbours, three above and three below. The minimum energy configuration for the molecular orientations turns out to be at $\theta$=18^o, $\phi$=8^o, and $\psi$=5^o, where $\theta$, $\phi$, and $\psi$ define the molecular orientations.Comment: ReVTeX (4 pages) + 2 PostScript figure

Total hip arthroplasties in the Dutch Arthroplasty Register (LROI) and the Nordic Arthroplasty Register Association (NARA): comparison of patient and procedure characteristics in 475,685 cases

Background and purpose — Collaborations between arthroplasty registries are important in order to create the possibility of detecting inferior implants early and improve our understanding of differences between nations in terms of indications and outcomes. In this registry study we compared patient and procedure characteristics, and revision rates in the Nordic Arthroplasty Register Association (NARA) database and the Dutch Arthroplasty Register (LROI). Patients and methods — All total hip arthroplasties (THAs) performed in 2010–2016 were included from the LROI (n = 184,862) and the NARA database (n = 290,823), which contains data from Denmark, Norway, Sweden, and Finland. Descriptive statistics and Kaplan–Meier survival analyses based on all reasons for revision and stratified by fixation were performed and compared between countries. Results — In the Netherlands, the proportion of patients aged < 55 years (9%) and male patients (34%) was lower than in Nordic countries (< 55 years 11–13%; males 35–43%); the proportion of osteoarthritis (OA) (87%) was higher compared with Sweden (81%), Norway (77%), and Denmark (81%) but comparable to Finland (86%). Uncemented fixation was used in 62% of patients in the Netherlands, in 70% of patients in Denmark and Finland, and in 28% and 19% in Norway and Sweden, respectively. The 5-year revision rate for THAs for OA was lower in Sweden (2.3%, 95% CI 2.1–2.5) than in the Netherlands (3.0%, CI 2.9–3.1), Norway (3.8%, CI 3.6–4.0), Denmark (4.6%, CI 4.4–4.8), and Finland (4.4%, CI 4.3–4.5). Revision rates in Denmark, Norway, and Finland were higher for all fixation groups. Interpretation — Patient and THA procedure characteristics as well as revision rates evinced some differences between the Netherlands and the Nordic countries. The Netherlands compared best with Denmark in terms of patient and procedure characteristics, but resembled Sweden more in terms of short-term revision risk. Combining data from registries like LROI and the NARA collaboration is feasible and might possibly enable tracking of potential outlier implants.publishedVersio

Genome wide DNA methylation profiling of osteoarthritic articular cartilage

Optimising joint reconstruction management in arthritis and bone tumour patient

Environmental Particle Emissions due to Automated Drilling of Polypropylene Composites and Nanocomposites Reinforced with Talc, Montmorillonite and Wollastonite

In this study, the effect on nanoparticle emissions due to drilling on Polypropylene (PP) reinforced with 20% talc, 5% montmorillonite (MMT) and 5% Wollastonite (WO) is investigated. The study is the first to explore the nanoparticle release from WO and talc reinforced composites and compares the results to previously researched MMT. With 5% WO, equivalent tensile properties with a 10 % weight reduction were obtained relative to the reference 20% talc sample. The materials were fabricated through injection moulding. The nanorelease studies were undertaken using the controlled drilling methodology for nanoparticle exposure assessment developed within the European Commission funded SIRENA Life 11 ENV/ES/506 project. Measurements were taken using CPC and DMS50 equipment for real-time characterization and measurements. The particle number concentration (of particles <1000nm) and particle size distribution (4.87nm - 562.34nm) of the particles emitted during drilling were evaluated to investigate the effect of the silicate fillers on the particles released. The nano-filled samples exhibited a 33% decrease (MMT sample) or a 30% increase (WO sample) on the average particle number concentration released in comparison to the neat polypropylene sample. The size distribution data displayed a substantial percentage of the particles released from the PP, PP/WO and PP/MMT samples to be between 5-20nm, whereas the PP/talc sample emitted larger particle diameters.The work is funded by and part of the European Commission Life project named Simulation of the release of nanomaterials from consumer products for environmental exposure assessment (SIRENA, Pr. No. LIFE 11 ENV/ES/596). The access and use of the facilities at the Flemish Institute for Technological Research (VITO) was funded by QualityNano Project through Transnational Access (TA Application VITO-TAF-382 and VITO-TAF-500) under the European Commission, Grant Agreement No: INFRA-2010-262163. Kristof is also thankful for partial funding by the School of Engineering at Robert Gordon University for his studentship

Competitiveness and the export performance of the euro area

Chapter 1 provides an overview and assessment of the price competitiveness and export performance of the euro area and the larger euro area countries, as well as an evaluation of how standard equations have been able to explain actual export developments. Chapter 2 carries out a constant market share analysis for the euro area and thereby sheds light on the reasons for movements in aggregate export market shares by looking at the sectoral and geographical composition of euro area exports. Chapter 3 looks at the evolution of the technological competitiveness of the euro area and major competitors – proxied by patenting activity and R&D expenditure – and analyses some structural indicators of competitiveness using survey data. Chapter 4 then looks at the impact of FDI on competitiveness and export performance. Finally, Chapter 5 summarises the main findings of the report, but also critically evaluates their importance and implications.

Defining an International Standard Set of Outcome Measures for Patients With Hip or Knee Osteoarthritis: Consensus of the International Consortium for Health Outcomes Measurement Hip and Knee Osteoarthritis Working Group

Objective: To define a minimum Standard Set of outcome measures and case-mix factors for monitoring, comparing, and improving health care for patients with clinically diagnosed hip or knee osteoarthritis (OA), with a focus on defining the outcomes that matter most to patients. Methods: An international working group of patients, arthroplasty register experts, orthopedic surgeons, primary care physicians, rheumatologists, and physiotherapists representing 10 countries was assembled to review existing literature and practices for assessing outcomes of pharmacologic and nonpharmacologic OA therapies, including surgery. A series of 8 teleconferences, incorporating a modified Delphi process, were held to reach consensus. Results: The working group reached consensus on a concise set of outcome measures to evaluate patients’ joint pain, physical functioning, health-related quality of life, work status, mortality, reoperations, readmissions, and overall satisfaction with treatment result. To support analysis of these outcome measures, pertinent baseline characteristics and risk factor metrics were defined. Annual outcome measurement is recommended for all patients. Conclusion: We have defined a Standard Set of outcome measures for monitoring the care of people with clinically diagnosed hip or knee OA that is appropriate for use across all treatment and care settings. We believe this Standard Set provides meaningful, comparable, and easy to interpret measures ready to implement in clinics and/or registries globally. We view this set as an initial step that, when combined with cost data, will facilitate value-based health care improvements in the treatment of hip and knee OA