Utilização de jigues a ar na concentração de resíduos de construção e demolição

Resíduos de construção e demolição são um dos principais resíduos sólidos gerados em centros urbanos em todo o mundo. Normalmente, parte deles são utilizados, após cominuição e classificação granulométrica, sem nenhum processo de separação ou concentração. Eles podem ser usados como agregados em concreto de baixa resistência, em sub-bases de estradas, ou em outras utilizações com baixo valor agregado. O presente trabalho apresenta estudos de separação e concentração em jigues a ar dos diferentes materiais presentes nestes resíduos.Peer ReviewedObjectius de Desenvolupament Sostenible::9 - Indústria, Innovació i InfraestructuraPostprint (published version

Does Finishing at Pasture Influence the Colour of Muscle from Suckler Bulls and Can Colour Be Used to Authenticate Their Pre-Slaughter Diet?

[EN] The primary objective of this study was to compare the colour of muscle from bulls finished at pasture or indoors on a high concentrate diet. The ancillary objectives were to identify possible explanations for any differences in the colour observed and the potential of muscle colour to discriminate between bull beef from different production systems. Growth, longissimus muscle colour, fibre type composition and metabolic profile were measured in late-maturing breed sired suckler bulls slaughtered at 19 months of age after 199 days at pasture (G0), 100 days indoors after 98 days at pasture (G0AL) and indoors for 199 days (AL). When compared to bulls finished indoors and offered a high concentrate ration, the carcass weight of G0 bulls was lower, their carcasses were leaner, and their longissimus muscle was similar in lightness but less red and had a lower glycolytic metabolism. The temperature at which the longissimus muscle reached pH 6.0 was lower (19.7 °C) for G0 than for G0AL (29.9 °C) and AL (31.6 °C), which did not differ. Co-variate adjustment for this variable removed the differences in redness. Adjusting the chill settings appears to be a practical strategy for abattoirs to minimise early post-mortem differences in muscle colour between lighter grass-fed and heavier concentrate-fed carcasses. The preliminary results demonstrate the potential of both L*, a*, b* values and the visible reflectance spectra of muscle to discriminate between grass- finished and concentrate-finished bull beef, but further refinement and validation of the models is required.This project (11/SF/322, “BullBeef”) was funded by the competitive research programmes of the Irish Department of Agriculture, Food and the Marine

Canonical discriminant analysis of the fatty acid profile of muscle to authenticate beef from grass-fed and other beef production systems: Model development and validation

peer-reviewedThe potential of diet-induced differences in the fatty acid profile of muscle to discriminate beef from different feeding systems and its potential use as an authentication tool was investigated. Three canonical discriminant models were built and validated using the fatty acid profile of beef from animals fed solely on pasture or cereal-based concentrates for 11 months or on various pasture/grass silage/concentrate combinations, including concentrates enriched with plant oils. Results indicated that models could successfully discriminate between grass-, partially grass- and concentrate-fed beef (accuracy = 99%) and between grass-fed beef and beef from animals supplemented with plant oils (accuracy = 96%). The approach also showed potential for distinguishing between beef from exclusively pasture-fed cattle and beef from cattle fed on pasture preceded by a period on ensiled grass (accuracy = 89%). Models were also applied to beef samples from 9 different countries. Of 97 international samples, including samples stated to be grass-fed, only 5% were incorrectly classified as Irish-grass-fed beef. These results suggested that the models captured traits in the fatty acid profile that are characteristic of Irish grass-fed beef and that this feature could be used for distinguishing Irish grass-fed beef from beef from other regions

Concentração de resíduos de construção e demolição por sensor-based sorting

Os Resíduos de Construção e Demolição (RCD) apresentam composições diferentes, dependendo da construção do prédio, tamanho da cidade, desenvolvimento do país etc. Os principais componentes do RCD são o concreto e a cerâmica vermelha (tijolos). Este estudo mostra a possibilidade de separar e concentrar RCD através de Separadores Baseados em Sensores (Sensor-based sorting). Em todos os testes foi utilizada uma mistura de concreto, cerâmica vermelha e gesso, sem a presença de metais ou impurezas leves. Partículas de concreto e cerâmica vermelha foram escolhidas devido ao seu domínio em todos os RCD gerados. Partículas de gesso foram utilizadas devido a este ser o principal e mais prejudicial contaminante em formulações de novos concretos, bem como a possibilidade de reciclagem na indústria. Todos os testes foram realizados com partículas na faixa de tamanho de 20x4 mm.Peer ReviewedObjectius de Desenvolupament Sostenible::9 - Indústria, Innovació i InfraestructuraPostprint (published version

Production of high-quality coarse recycled aggregates through a two-stage jigging process

Peer ReviewedObjectius de Desenvolupament Sostenible::9 - Indústria, Innovació i InfraestructuraObjectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.4 - Per a 2030, modernitzar les infraestructures i reconvertir les indústries perquè siguin sostenibles, usant els recursos amb més eficàcia i promovent l’adopció de tecnologies i processos industrials nets i racionals ambiental­ment, i aconseguint que tots els països adoptin mesures d’acord amb les capacitats respectivesObjectius de Desenvolupament Sostenible::12 - Producció i Consum ResponsablesObjectius de Desenvolupament Sostenible::12 - Producció i Consum Responsables::12.5 - Per a 2030, disminuir de manera substancial la generació de residus mitjançant polítiques de prevenció, reducció, reciclatge i reutilitzacióPostprint (published version

Corrigendum: Chronic Exposure to Malaria Is Associated with Inhibitory and Activation Markers on Atypical Memory B Cells and Marginal Zone-Like B Cells

[This corrects the article DOI: 10.3389/fimmu.2017.00966.]

Maternal and neonatal immune response to SARS-CoV-2, IgG transplacental transfer and cytokine profile

SARS-CoV-2 infected pregnant women are at increased risk of severe COVID-19 than non-pregnant women and have a higher risk of adverse pregnancy outcomes like intrauterine/fetal distress and preterm birth. However, little is known about the impact of SARS-CoV-2 infection on maternal and neonatal immunological profiles. In this study, we investigated the inflammatory and humoral responses to SARS-CoV-2 in maternal and cord blood paired samples. Thirty-six pregnant women were recruited at delivery at Hospital Sant Joan de Déu, Barcelona, Spain, between April-August 2020, before having COVID-19 available vaccines. Maternal and pregnancy variables, as well as perinatal outcomes, were recorded in questionnaires. Nasopharyngeal swabs and maternal and cord blood samples were collected for SARS-CoV-2 detection by rRT-PCR and serology, respectively. We measured IgM, IgG and IgA levels to 6 SARS-CoV-2 antigens (spike [S], S1, S2, receptor-binding domain [RBD], nucleocapsid [N] full-length and C-terminus), IgG to N from 4 human coronaviruses (OC43, HKU1, 229E and NL63), and the concentrations of 30 cytokines, chemokines and growth factors by Luminex. Mothers were classified as infected or non-infected based on the rRT-PCR and serology results. Sixty-four % of pregnant women were infected with SARS-CoV-2 (positive by rRT-PCR during the third trimester and/or serology just after delivery). None of the newborns tested positive for rRT-PCR. SARS-CoV-2 infected mothers had increased levels of virus-specific antibodies and several cytokines. Those with symptoms had higher cytokine levels. IFN-? was increased in cord blood from infected mothers, and in cord blood of symptomatic mothers, EGF, FGF, IL-17 and IL-15 were increased, whereas RANTES was decreased. Maternal IgG and cytokine levels showed positive correlations with their counterparts in cord blood. rRT-PCR positive mothers showed lower transfer of SARS-CoV-2-specific IgGs, with a stronger effect when infection was closer to delivery. SARS-CoV-2 infected mothers carrying a male fetus had higher antibody levels and higher EGF, IL-15 and IL-7 concentrations. Our results show that SARS-CoV-2 infection during the third trimester of pregnancy induces a robust antibody and cytokine response at delivery and causes a significant reduction of the SARS-CoV-2-specific IgGs transplacental transfer, with a stronger negative effect when the infection is closer to delivery.Copyright © 2022 Rubio, Aguilar, Bustamante, Muñoz, Vázquez-Santiago, Santano, Vidal, Melero, Parras, Serra, Santamaria, Carolis, Izquierdo, Gómez-Roig, Dobaño, Moncunill and Mazarico

Optimization systems developed to improve the yield on tungsten and tantalum extraction and reduce associated costs – the EU HORIZON 2020 Optimore project (grant no. 642201)

Peer ReviewedPostprint (published version

SARS-CoV-2 Seroprevalence Study in Pediatric Patients and Health Care Workers Using Multiplex Antibody Immunoassays

SARS-CoV-2 infection has become a global health problem specially exacerbated with the continuous appearance of new variants. Healthcare workers (HCW) have been one of the most affected sectors. Children have also been affected, and although infection generally presents as a mild disease, some have developed the Pediatric Inflammatory Multisystem Syndrome Temporally Associated with SARS-CoV-2 (PIMS-TS). We recruited 190 adults (HCW and cohabitants, April to June 2020) and 57 children (April 2020 to September 2021), of whom 12 developed PIMS-TS, in a hospital-based study in Spain. Using an in-house Luminex assay previously validated, antibody levels were measured against different spike and nucleocapsid SARS-CoV-2 proteins, including the receptor-binding domain (RBD) of the Alpha, Beta, Gamma, and Delta variants of concern (VoC). Seropositivity rates obtained from children and adults, respectively, were: 49.1% and 11% for IgG, 45.6% and 5.8% for IgA, and 35.1% and 7.3% for IgM. Higher antibody levels were detected in children who developed PIMS-TS compared to those who did not. Using the COVID-19 IgM/IgA ELISA (Vircell, S.L.) kit, widely implemented in Spanish hospitals, a high number of false positives and lower seroprevalences compared with the Luminex estimates were found, indicating a significantly lower specificity and sensitivity. Comparison of antibody levels against RBD-Wuhan versus RBD-VoCs indicated that the strongest positive correlations for all three isotypes were with RBD-Alpha, while the lowest correlations were with RBD-Delta for IgG, RBD-Gamma for IgM, and RBD-Beta for IgA. This study highlights the differences in antibody levels between groups with different demographic and clinical characteristics, as well as reporting the IgG, IgM, and IgA response to RBD VoC circulating at the study period

Characterization of Demolished Concretes with Three Different Strengths for Recycling as Coarse Aggregate

This paper presents a physical characterization for the recycling into new concretes of three comminuted concretes: C16/20 (“ordinary concrete”), C50/60 (“high strength concrete”), and C70/85 (“very high strength concrete”). The top size of the crushed concretes was 19.1 mm and the size range was 4.75 to 19.1 mm. The characterization was carried out with coarse aggregate liberation, to be prepared and concentrated in a gravity concentration process. The density distribution of the coarse aggregate, cement paste, and sand was carried out in different size ranges (4.75/19.1 mm; 4.75/8.0 mm; 8.0/12.5 mm; and 12.5/19.1 mm) for the three concretes studied. The form factor of the samples, as well as the porosity determination of particles in different density ranges, are presented. The obtained results indicate that the coarse aggregate liberation was more intensive for the low resistance concrete (C16/20), but a reasonable coarse aggregate recovery is possible for all concretes