Synthesis of novel azolo[1,2,3,5]thiatriazines

The cycloaddition of diazoazoles with acylisothiocyanates has been found to result in the formation of a 1,2,3,5-thiatriazine ring. This new reaction was used to prepare novel 8-substituted 4-[benzoylimino-4H-imidazo(pyrazolo)][5,1-d][1,2,3,5]thiatriazines. The structures of the compounds prepared were carefully studied by X-ray diffraction, IR and NMR spectroscopy

Printing Technologies as an Emerging Approach in Gas Sensors: Survey of Literature

Herein, we review printing technologies which are commonly approbated at recent time in the course of fabricating gas sensors and multisensor arrays, mainly of chemiresistive type. The most important characteristics of the receptor materials, which need to be addressed in order to achieve a high efficiency of chemisensor devices, are considered. The printing technologies are comparatively analyzed with regard to, (i) the rheological properties of the employed inks representing both reagent solutions or organometallic precursors and disperse systems, (ii) the printing speed and resolution, and (iii) the thickness of the formed coatings to highlight benefits and drawbacks of the methods. Particular attention is given to protocols suitable for manufacturing single miniature devices with unique characteristics under a large-scale production of gas sensors where the receptor materials could be rather quickly tuned to modify their geometry and morphology. We address the most convenient approaches to the rapid printing single-crystal multisensor arrays at lab-on-chip paradigm with sufficiently high resolution, employing receptor layers with various chemical composition which could replace in nearest future the single-sensor units for advancing a selectivity

A sol-gel synthesis and gas-sensing properties of finely dispersed ZrTiO4

The transparent titanium-zirconium-containing gel was obtained using heteroligand coordination compounds (namely, alkoxoacetylacetonates) as the precursors. The high-dispersive system “ZrTiO4 – carbon”, formed after drying of such gel and carbonization of the obtained xerogel, was used to study the evolution of microstructure for the product (ZrTiO4) during thermal treatment in air for 1 h in the temperature range from 500 °C to 1000°С. It was stated that the formation of crystalline phase occurred in the narrow range 690-730°С. The thermal treatment at 500 °C and 600°С allowed obtaining micro- and mesoporous X-ray amorphous products of the composition ZrTiO4, with the specific surface area falling in the range 82–150m2/g. At the higher temperatures the single-phase nanocrystalline powder was prepared (the specific surface area amounted to 2.5–15m2/g). Particle coarsening took place more extensively at temperatures ≥700°С was shown. For the ZrTiO4 nanopowder crystallized under the mildest conditions at the temperature of 700 °C, chemoresistive gas-sensitive properties were studied for the first time. The material showed a high reproducible response at 1–20% O2 and 200–10,000 ppm H2 at a relatively low detection operating temperature of 450 °C

Short-Term Oxidation of HfB₂-SiC Based UHTC in Supersonic Flow of Carbon Dioxide Plasma

The short-term (5 min) exposure to the supersonic flow of carbon dioxide plasma on ultrahigh-temperature ceramics of HfB2-30vol.%SiC composition has been studied. It was shown that, when established on the surface at a temperature of 1615–1655 °C, the beginning of the formation of an oxidized layer takes place. Raman spectroscopy and scanning electron microscopy studies showed that the formation of a porous SiC-depleted region is not possible under the HfO2-SiO2 surface oxide layer. Numerical modeling based on the Navier–Stokes equations and experimental probe measurements of the test conditions were performed. The desirability of continuing systematic studies on the behavior of ultrahigh-temperature ZrB2/HfB2-SiC ceramics, including those doped with various components under the influence of high-enthalpy gas flows, was noted