109 research outputs found
Airtightness of UK dwellings
This paper presents the results and key messages that have been obtained from Phase 1 of a participatory action research project that was undertaken with 5 developers to investigate the practical design and construction issues that arise in making improvements to the airtightness of speculatively built mainstream housing. Two construction types were represented in the project, masonry cavity and light steel frame. Phase 1 of the project sought to assess in detail the design, construction and air permeability of 25 dwellings that were constructed to conform to the requirements of Approved Document Part L1 2002. While the total number of dwellings reported here is small, the results suggest that there is not a consistent approach to the way in which developers present information on air leakage to those on site, a mixture of approaches are utilised on site to achieve the same specification and there appears to be a lack of foresight in the detailed design stage, resulting in specifications that are practically very difficult to achieve. Despite this, the air permeability results suggest that dwellings constructed with a wet/mechanically plastered internal finish, can default to a reasonable standard of airtightness by UK standards, without much additional attention being given to airtightness
Condensation Risk â Impact of Improvements to Part L and Robust Details on Part C -Interim report number 7: Final report on project fieldwork
This report sets out, in draft1, the results of the fieldwork phase of research into the impacts of the 2002 revisions to Part L of the building regulations (Approved Document L1 - DTLR, 2001), and the adoption of Robust Details (RDs - DEFRA 2001) on the extent of condensation risk in the construction of dwellings (Oreszczyn and Bell, 2003). The objective of the fieldwork was to explore the practical application of the revised Part L and its associated robust details by housing developers. This was done through a qualitative evaluation of the design and construction of 16 housing schemes designed in accordance with the revised part L and making use of robust details2. The results of the analysis are to be used to enable condensation modelling that takes into account not only the guidance of robust details but also the way in which construction details were actually designed and, perhaps more importantly, constructed. To this end the report identifies 7 areas of construction detailing (yielding some 15 separate detail models) that are to be included in the condensation modelling phase of the project
Low carbon housing: lessons from Elm Tree Mews
This report sets out the findings from a low carbon housing trial at Elm Tree Mews, York, and discusses the technical and policy issues that arise from it. The Government has set an ambitious target for all new housing to be zero carbon by 2016. With the application of good insulation, improved efficiencies and renewable energy, this is theoretically possible. However, there is growing concern that, in practice, even existing carbon standards are not being achieved and that this performance gap has the potential to undermine zero carbon housing policy. The report seeks to address these concerns through the detailed evaluation of a low carbon development at Elm Tree Mews. The report: * evaluates the energy/carbon performance of the dwellings prior to occupation and in use; * analyses the procurement, design and construction processes that give rise to the performance achieved; * explores the resident experience; * draws out lessons for the development of zero carbon housing and the implications for government policy; and * proposes a programme for change, designed to close the performance gap
Airtightness of buildings â towards higher performance: Final Report â Domestic Sector Airtightness
This report constitutes milestone D11 â Final Report â Domestic Sector Airtightness of the Communities and Local Government/ODPM Project reference CI 61/6/16 (BD2429) Airtightness of Buildings â Towards Higher Performance (Borland and Bell, 2003). This report presents the overall conclusions and key messages obtained from the project through design assessments, construction observations, discussions with developers and pressurisation test results. It also summarises discussion on the airtight performance of current UK housing, the implementation and impact of current and future legislation, and identifies potential areas for future work
Evaluating the impact of an enhanced energy performance standard on load-bearing masonry domestic construction: Understanding the gap between designed and real performance: lessons from Stamford Brook.
This report is aimed at those with interests in the procurement, design and construction of new dwellings both now and in the coming years as the Governmentâs increasingly stringent targets for low and zero carbon housing approach. It conveys the results of a research project, carried out between 2001 and 2008, that was designed to evaluate the extent to which low carbon housing standards can be achieved in the context of a large commercial housing development. The research was led by Leeds Metropolitan University in collaboration with University College London and was based on the Stamford Brook development in Altrincham, Cheshire. The project partners were the National Trust, Redrow and Taylor Wimpey and some 60 percent of the planned 700 dwelling development has been completed up to June 2008. As the UK house building industry and its suppliers grapple with the challenges of achieving zero carbon housing by 2016, the lessons arising from this project are timely and of considerable value. Stamford Brook has demonstrated that designing masonry dwellings to achieve an enhanced energy standard is feasible and that a number of innovative approaches, particularly in the area of airtightness, can be successful. The dwellings, as built, exceed the Building Regulations requirements in force at the time but tests on the completed dwellings and longer term monitoring of performance has shown that, overall, energy consumption and carbon emissions, under standard occupancy, are around 20 to 25 percent higher than design predictions. In the case of heat loss, the discrepancy can be much higher. The report contains much evidence of considerable potential but points out that realising the design potential requires a fundamental reappraisal of processes within the industry from design and construction to the relationship with its supply chain and the development of the workforce. The researchers conclude that, even when builders try hard, current mainstream technical and organisational practices together with industry cultures present barriers to consistent delivery of low and zero carbon performance. They suggest that the underlying reasons for this are deeply embedded at all levels of the house building industry. They point out also that without fundamental change in processes and cultures, technological innovations, whether they be based on traditional construction or modern methods are unlikely to reach their full potential. The report sets out a series of wide ranging implications for new housing in the UK, which are given in Chapter 14 and concludes by firmly declaring that cooperation between government, developers, supply chains, educators and researchers will be crucial to improvement. The recommendations in this report are already being put into practice by the researchers at Leeds Metropolitan University and University College London in their teaching and in further research projects. The implications of the work have been discussed across the industry at a series of workshops undertaken in 2008 as part of the LowCarb4Real project (see http://www.leedsmet.ac.uk/as/cebe/projects/lowcarb4real/index.htm). In addition, the learning is having an impact on the work of the developers (Redrow and Taylor Wimpey) who, with remarkable foresight and enthusiasm, hosted the project. This report seeks to make the findings more widely available and is offered for consideration by everyone who has a part to play in making low and zero carbon housing a reality
External walls partially filled with insulation, and the potential to "top-up" the residual cavity.
This review found that the connecting voids in partially filled cavity walls leads to considerable variation in thermal performance. Whilst photographic records found considerable evidence of gaps in the insulation resulting from poor site practice and installation, research also shows that relatively small breaks between insulation sheets or gaps between the wall and insulation result in a thermal bypass. As the gaps and connecting voids increase air circulation, convection currents and pressure induced exchanges reduce the effectiveness of the thermal barrier. Where effective installation is possible, the topping up of partially filled cavity walls with insulation shows potential to improve the thermal performance of the wall. In the cases reviewed, the installation of blown mineral wool fill reduced variation in heat flow and increased thermal performance. By filling the voids with insulation the passage of air and thermal bypasses were restricted
Airtightness testing and thermographic analysis of 20 WDH dwellings - Nov '14 to Feb '15
Presentation to WDH as part of the Wakefield Affordable Warmth Action Pla
Adding value and meaning to coheating tests
Purpose: The coheating test is the standard method of measuring the heat loss coefficient of a building, but to be useful the test requires careful and thoughtful execution. Testing should take place in the context of additional investigations in order to achieve a good understanding of the building and a qualitative and (if possible) quantitative understanding of the reasons for any performance shortfall. The paper aims to discuss these issues. Design/methodology/approach: Leeds Metropolitan University has more than 20 years of experience in coheating testing. This experience is drawn upon to discuss practical factors which can affect the outcome, together with supporting tests and investigations which are often necessary in order to fully understand the results. Findings: If testing is approached using coheating as part of a suite of investigations, a much deeper understanding of the test building results. In some cases it is possible to identify and quantify the contributions of different factors which result in an overall performance shortfall. Practical implications: Although it is not practicable to use a fully investigative approach for large scale routine quality assurance, it is extremely useful for purposes such as validating other testing procedures, in-depth study of prototypes or detailed investigations where problems are known to exist. Social implications: Successful building performance testing is a vital tool to achieve energy saving targets. Originality/value: The approach discussed clarifies some of the technical pitfalls which may be encountered in the execution of coheating tests and points to ways in which the maximum value can be extracted from the test period, leading to a meaningful analysis of the building's overall thermal performance
- âŠ